ICS2 Release 1. Security begins before loading.
The first phase of Import Control System 2 introduced pre-loading advance cargo information for postal and express consignments transported by air.
Release 1 marked the beginning of a new approach to EU customs safety and security: identifying potential aviation threats before consignments are loaded onto an aircraft, rather than relying exclusively on information available closer to arrival.
Simplified illustration of the information flow and risk-analysis purpose. Not a complete ENS data specification.
This guide explains the original scope of ICS2 Release 1. For current filing obligations, consult the applicable ICS2 requirements and subsequent releases.
PLACI explained. Security begins before loading.
Pre-Loading Advance Cargo Information (PLACI) introduced an earlier layer of customs security assessment for relevant air consignments entering the European Union.
Under ICS2 Release 1, postal operators and express carriers submitted a limited set of shipment data before loading. Customs authorities could analyse this information to identify potential aviation security threats and, where necessary, request additional information or security measures.
Four steps before aircraft loading.
Collect shipment data
The relevant operator obtains the required advance information about the consignment, including the parties and goods involved.
DATA COLLECTIONSubmit PLACI
The minimum pre-loading information is transmitted electronically through the applicable ICS2 filing arrangements.
ELECTRONIC FILINGCustoms risk analysis
Customs assesses the information for potential aviation security risks before the consignment is loaded onto an aircraft.
SECURITY ASSESSMENTSecurity response
Where required, customs may issue a request for information, request additional screening or instruct that the consignment must not be loaded.
RFI / RFS / DNLImportant distinction: PLACI is an advance security assessment process. The absence of a customs referral is not, by itself, an import clearance decision or a general authorisation to load.
The essential data. Before the aircraft departs.
The PLACI concept is commonly described through the 7+1 minimum data set. These data elements provide an initial picture of the consignment for aviation security risk assessment.
The objective is to make essential shipment information available at an early stage, rather than waiting until all information required for a complete ENS is available.
Incomplete or inaccurate descriptions and party details can undermine risk assessment and may lead to requests for clarification. Information should reflect the actual shipment, not generic assumptions.
7 + 1 data elements
PLACI is not the complete ENS.
Pre-loading data and the complete Entry Summary Declaration serve related but distinct functions within the EU advance cargo security framework.
PLACI
A limited set of information used for aviation security assessment before loading.
- Minimum advance cargo information
- Early aviation security risk analysis
- Relevant before aircraft loading
- Supports security referrals when required
Full ENS
The broader Entry Summary Declaration data required under the applicable customs rules.
- More extensive declaration information
- Supports wider safety and security analysis
- Subject to applicable pre-arrival deadlines
- May involve multiple supply-chain actors
Who was involved in ICS2 Release 1?
Release 1 focused on the postal and express sectors in air transport. Its implementation depended on accurate shipment data, timely electronic filing and coordination between the operators handling consignments and the customs authorities performing security analysis.
Postal operators
Designated postal operators were among the principal participants in the first ICS2 deployment, particularly for postal consignments transported by air from outside the European Union.
Operational characteristics
- High shipment volumes. Large numbers of individual postal items may move within consolidated international mail flows.
- Advance electronic information. Data may originate from the sender and be exchanged between postal administrations before reaching the EU.
- Item-level identification. Shipment references and goods descriptions support the identification and assessment of individual items.
- Coordination across networks. Data availability depends on upstream collection, electronic exchange and transmission processes.
Express carriers
Express operators were also within the initial scope of ICS2 Release 1 for air consignments, with pre-loading data incorporated into time-sensitive international delivery operations.
Operational characteristics
- Integrated shipment systems. Express networks often manage booking, collection, sorting and transport information through connected systems.
- Time-critical processing. Pre-loading data must be available sufficiently early for the required security assessment.
- Shipment-level information. Accurate goods descriptions and party details are essential inputs to the advance filing process.
- Referral management. Operational procedures must accommodate requests for additional information or security instructions.
One shipment. Several operational roles.
A shipment can involve several organisations before it reaches the aircraft. Understanding their different functions helps explain why data quality and filing responsibility are separate compliance questions.
Sender / Commercial data source
Provides or originates shipment particulars such as the goods description, sender and recipient details and other information used in transport documentation.
Responsible postal or express operator
Organises the required pre-loading filing through the relevant ICS2 arrangements, using the data available for the consignment and the applicable legal and technical requirements.
EU customs authorities
Perform the relevant aviation security risk analysis and may issue referrals or instructions where the assessment requires further information or action.
This is a simplified operational model. The legal person responsible for filing must be determined under the rules applicable to the specific movement and filing arrangement. A sender supplying data does not automatically become the ENS declarant, and using an IT service provider does not automatically transfer the declarant’s legal obligations.
Who contributes what?
The matrix illustrates typical operational contributions, not an exhaustive or universal allocation of legal liability.
| Participant | Typical contribution | Key consideration |
|---|---|---|
| Sender / Shipper | Original goods and party information | Accuracy and completeness of source data |
| Postal operator | Postal data processing and relevant filings | Advance information and network coordination |
| Express carrier | Shipment processing and relevant filings | Timely submission and referral handling |
| IT service provider | Technical messaging and system integration | Transmission reliability and error management |
| Customs authorities | Security risk analysis and related instructions | Risk assessment before loading |
When customs identifies a risk. Three different responses.
The purpose of pre-loading risk analysis was not simply to collect shipment information. It was to allow customs authorities to identify potential aviation security threats early enough for appropriate action before goods were loaded onto an aircraft.
Where the initial information was insufficient or raised a security concern, the ICS2 process could involve a request for further information, additional screening, or a Do Not Load instruction. These outcomes have different meanings and operational consequences.
Request for Information
Additional details are needed to assess the consignment.
What it means
Customs requires supplementary information to clarify an aspect of the shipment or complete the security assessment. The original filing alone has not provided everything needed for the analysis.
Operational response
The relevant operator must identify the requested information, obtain reliable supporting details and respond through the applicable electronic process.
A vague description such as “accessories” may require clarification of the actual goods being transported.
Request for Screening
Additional security screening is required.
What it means
Customs requires further security screening of the consignment. The request concerns an additional security measure, not merely the correction of a data field.
Operational response
The relevant parties must coordinate the requested screening in accordance with applicable aviation security procedures and communicate the required outcome through the prescribed arrangements.
A consignment may require additional examination beyond the screening measures already performed.
Do Not Load
The consignment must not be loaded onto the aircraft.
What it means
A Do Not Load instruction is a specific security intervention preventing the affected consignment from being loaded onto an aircraft.
Operational response
The instruction must be communicated promptly to the relevant handling and transport parties. The affected consignment must remain off the aircraft unless the competent authorities subsequently permit a different course of action.
DNL is not an ordinary filing rejection or a request to correct data. It is a security instruction with immediate loading consequences.
From advance data to an operational response.
The pre-loading assessment does not generate an additional request or DNL instruction.
Further information or security screening is required, with the applicable response process.
Loading of the affected consignment is prohibited under the customs instruction.
These are possible security outcomes, not three mandatory sequential stages. An RFI or RFS is not necessarily followed by a DNL. The absence of a referral does not itself constitute customs release or an unconditional authorisation to transport the goods.
Why referral handling became a critical capability.
Release 1 required more than electronic data transmission. Operators also needed procedures for receiving, interpreting and acting upon customs communications before the relevant loading operation.
Message monitoring
Ensure that security communications are received and brought to the attention of the appropriate operational team.
Shipment identification
Match each request or instruction to the correct shipment reference, even where consignments are handled within consolidated flows.
Data escalation
Contact the relevant data source when additional information is required, without introducing unsupported or invented shipment details.
Loading controls
Integrate applicable security instructions into physical handling processes so that affected consignments are not loaded contrary to a DNL.
From the first release to a complete air cargo system.
ICS2 Release 1 established the pre-loading security concept for postal and express air consignments. Release 2 expanded that foundation into a broader air cargo safety and security framework, incorporating complete Entry Summary Declaration requirements and pre-arrival risk analysis.
Pre-loading security enters ICS2.
Postal and express air consignments become subject to the initial PLACI requirements. The priority is early identification of aviation security threats.
The framework expands to all air cargo.
Release 2 introduces the wider air transport requirements, including general air cargo and complete ENS information for the relevant postal, express and general cargo movements.
The original Release 1 operations end.
According to the European Commission’s 2025 implementation reporting, this was the cut-off date for Release 1-related production operations. The subsequent ICS2 framework had taken over the relevant operational functions.
What actually changed?
The transition affected the range of shipments, the information required and the participants involved in the advance customs security process.
| Comparison | Release 1 | Release 2 |
|---|---|---|
| Deployment | 15 March 2021 | 1 March 2023 |
| Transport scope | Postal and express air consignments | Postal, express and general air cargo |
| Information | Minimum pre-loading ENS dataset | Complete ENS requirements for air transport |
| Risk analysis | Pre-loading aviation security assessment | Pre-loading and broader pre-arrival assessment |
| Operator coverage | Relevant postal and express operators | Wider air cargo supply chain, including carriers and freight forwarders |
| Operational significance | Introduced early electronic security screening | Expanded data, filing and risk management processes |
The dates shown are central deployment milestones, not necessarily the individual connection deadline for every operator. Transitional arrangements and deployment windows must be distinguished from the system launch dates.
From a limited filing requirement to supply-chain-wide coordination.
Release 2 made the availability, quality and exchange of cargo information increasingly important across the air transport supply chain.
Broader data collection
Operators needed to obtain more extensive shipment and transport information to support the applicable complete ENS requirements.
More participants
Air carriers, freight forwarders and other relevant logistics participants became increasingly involved in the ICS2 filing process.
Filing coordination
The introduction of broader filing arrangements required clearer allocation of data responsibilities and coordination between supply-chain actors.
System integration
Electronic submission, validation, message monitoring and error handling became central to operational readiness and compliance.
Next: ICS2 Release 2
Explore complete air cargo ENS requirements, pre-loading and pre-arrival processes, and the expanded responsibilities of air transport operators.
ICS2 Release 1. Frequently asked questions.
Essential answers about the first ICS2 deployment, pre-loading security, filing responsibilities and the transition to subsequent releases.
What was ICS2 Release 1?
ICS2 Release 1 was the first operational deployment of the EU Import Control System 2, launched on 15 March 2021. It introduced the submission of minimum pre-loading advance cargo information for relevant postal and express consignments transported by air.
Its primary objective was to support the early identification of potential aviation security threats.
What does PLACI mean?
PLACI stands for Pre-Loading Advance Cargo Information. It refers to advance shipment information provided before aircraft loading for aviation security risk assessment. It is not a substitute for the complete ENS dataset required under the applicable rules.
Which operators were covered by Release 1?
The initial deployment focused on relevant postal operators and express carriers involved in air consignments. General air cargo was brought into the wider ICS2 framework through Release 2.
Was a complete ENS required under Release 1?
Release 1 introduced the minimum pre-loading information requirement for its specified scope. The broader complete ENS requirements for air transport were introduced through Release 2. These historical phases should not be confused with the current filing framework.
What happens when customs issues a Do Not Load instruction?
A Do Not Load instruction prevents the affected consignment from being loaded onto the aircraft. It is different from a request for additional information or screening. Operators must follow the applicable customs security instructions.
Does ICS2 replace an import customs declaration?
No. ICS2 supports advance customs safety and security risk analysis through ENS information. An import customs declaration serves a different legal purpose and remains subject to its own requirements. ENS filing does not, by itself, release goods for free circulation.
Is Release 1 still a separate operational system?
Release 1 is now a historical implementation phase. The ICS2 framework has evolved through subsequent releases. Operators must determine their present obligations using the applicable legislation and current Commission guidance, rather than the original Release 1 scope.
What was the main difference between Release 1 and Release 2?
Release 1 concentrated on pre-loading information for postal and express air consignments. Release 2 expanded ICS2 to the broader air cargo environment and introduced the applicable complete ENS requirements.
Read the Release 2 guide →Legal framework and EU guidance.
Release 1 was a deployment phase of ICS2, not a standalone customs regulation. The underlying ENS and risk-analysis framework is established by the Union Customs Code and its supplementary acts.
Union Customs Code
Regulation (EU) No 952/2013, particularly Articles 127–129 concerning entry summary declarations, risk analysis, amendment and invalidation.
Read on EUR-Lex ↗UCC Delegated Regulation
Commission Delegated Regulation (EU) 2015/2446, including provisions and data requirements relevant to ENS obligations.
Read on EUR-Lex ↗UCC Implementing Regulation
Commission Implementing Regulation (EU) 2015/2447, setting out procedural provisions supporting the Union Customs Code.
Read on EUR-Lex ↗ICS2 Release 1 and Release 2
European Commission information explaining the original Release 1 scope and the subsequent extension to air cargo.
Read Commission guidance ↗Legal references should be read in their applicable consolidated versions. Historical deployment dates do not replace current operational instructions.
Release 1 established the foundation.
Continue with Release 2 to understand how pre-loading security developed into a wider air cargo declaration framework.