Inward processing — bring non-Union goods in to process them.
Inward processing allows non-Union goods to be used in the EU customs territory in one or more processing operations without immediately subjecting those goods to the import treatment that would apply on release for free circulation.
Use inward processing when non-Union goods are brought into the EU for operations such as manufacturing, transformation or repair before the resulting goods receive their next customs treatment.
The goods enter for a reason — something is going to happen to them.
Inward processing connects imported non-Union goods with an authorised operation. The operation may change the goods, incorporate them into another product, repair them or prepare them for their next commercial or customs destination.
Goods are placed under inward processing before the authorised processing operations take place.
The resulting products remain connected to the procedure until inward processing is correctly discharged.
Processing is broader than manufacturing.
The UCC concept covers several ways in which goods may be worked on. The important question is not simply whether the goods change, but what operation is authorised and how the imported goods relate to the resulting products.
Goods may be worked on or transformed as part of a production operation.
Imported components or materials may be used in the manufacture of processed products.
Inward processing can cover repair operations, including the restoration and putting-in-order of goods.
Certain goods may be used to facilitate the manufacture of processed products even where they are wholly or partly consumed during the operation.
The UCC definition includes working of goods, assembly, fitting, destruction, repair and certain goods used to facilitate the manufacture of processed products. Article 256 establishes when non-Union goods may be used under inward processing.
The input and the output need a customs connection.
For processing operations other than repair or destruction, the goods placed under inward processing must normally be identifiable in the processed products, subject to the rules for equivalent goods.
Inward processing is not simply “import without paying duty”. It is a controlled relationship between imported goods, an authorised processing operation and the customs treatment that follows.
Inward processing starts with an authorised control model.
Customs needs to understand the goods, the processing operation, the place where it will occur, the records that will support supervision and how the procedure will ultimately be discharged.
Identify the non-Union goods that will be placed under inward processing.
Define the processing operations and the products expected to result from them.
The authorised operation must be organised so customs can exercise effective supervision.
Records and identification methods must support customs supervision of the procedure.
The authorisation establishes the framework within which the goods or processed products must reach their next treatment.
Inward processing requires customs authorisation. The UCC sets conditions for granting that authorisation, including the ability of customs authorities to exercise supervision and, where relevant, the examination of economic conditions.
The authorisation is only the beginning.
Once goods enter inward processing, the operation has to remain consistent with the authorised model. Customs supervision follows the goods, the processing activity, the records and the final discharge of the procedure.
Defines the authorised framework within which inward processing may be used.
The physical goods and processing operations must remain consistent with the authorised operation.
Customs records provide the data needed to identify the goods, their status and their movements.
The procedure remains active until the goods or processed products receive a customs treatment that correctly discharges it.
Appropriate records support supervision by connecting the goods placed under inward processing with their customs status, movements and processing activity.
Suspended import treatment does not remove the customs risk.
Where a customs debt or other charges may be incurred, the authorisation framework requires the potential liability to be covered in accordance with the UCC guarantee rules.
The authorisation describes the operation customs has agreed to supervise. The goods, processing activity, records and final discharge should continue to describe that same operation while the procedure is active.
Processing is not the end — the procedure needs a destination.
Once processing has taken place, the goods or processed products must move towards a customs treatment that correctly ends the inward processing operation.
The processing operation may be finished, but the customs procedure still needs to be discharged correctly.
Processed products leave the Union customs territory.
Products move into a storage procedure before their next customs destination.
Goods or processed products receive another appropriate customs treatment.
The applicable import treatment is determined when the products are released into free circulation.
The commercial destination determines what comes next.
Inward processing creates flexibility during the processing stage. It does not predetermine whether the resulting products must be sold inside or outside the EU.
Where the commercial destination is outside the Union customs territory, the products may leave the EU without first being released for free circulation.
If the final destination is not yet known, the processed products may be placed under customs warehousing where the applicable conditions are satisfied.
The goods or processed products can move into another customs procedure when that route fits the next operation and its conditions are met.
Processed products may be released for free circulation. The applicable import duty, taxes and relevant trade-policy requirements must then be determined under the rules applicable to that release.
Free circulation changes the customs outcome.
Inward processing suspends the normal import treatment while the goods remain correctly under the procedure. If processed products are subsequently released for free circulation, the customs debt and other applicable import requirements must be determined.
The duty calculation can depend on the specific inward-processing rules and the basis applicable to the operation. Do not assume that every free-circulation case is calculated in exactly the same way.
The procedure cannot remain open indefinitely.
Customs authorities specify the period within which the inward processing procedure must be discharged. The period must be long enough for the processing operations and the required next customs treatment to be completed.
The UCC establishes how a special procedure other than transit is discharged when the goods or processed products receive an appropriate subsequent customs treatment.
Customs authorities specify the period within which the procedure must be discharged, taking account of the time needed to carry out the processing operations and complete the procedure.
Finishing the processing operation does not by itself finish inward processing. The customs procedure ends only when the goods or processed products receive the treatment required to discharge it correctly.
Before the first movement, make sure the procedure can survive customs control.
A workable inward-processing operation connects the authorisation, the goods, the processing activity, customs records and the route used to discharge the procedure.
Check the goods, processing operations, locations and other conditions against the customs authorisation.
The goods entering the procedure must correspond to the authorised operation and support the required identification or equivalent-goods controls.
Manufacturing, repair or other processing activity should remain consistent with the operation approved by customs.
Records should support supervision of the goods, their customs status, movements and the relevant processing activity.
Where a customs debt or other charges may be incurred, verify that the required guarantee arrangements are in place.
Processing and the subsequent customs treatment need to fit within the period specified for discharge.
Plan the subsequent customs procedure, removal from the Union customs territory or other lawful route used to discharge inward processing.
AUTHORISATION
LEGAL FRAMEGOODS
PHYSICAL INPUTPROCESSING
OPERATIONRECORDS
DATA CONTROLDISCHARGE
PROCEDURE ENDMost problems start before the procedure is discharged.
A mismatch between the authorised model and the real operation can become a customs problem later — when records are checked, goods move, products are released or the procedure is being discharged.
Readiness is not a one-time check. The real operation should remain aligned with the authorised customs model throughout the procedure.
Healthy procedure: customs reality, physical reality and record data continue to tell the same story.
The authorisation defines the conditions for using inward processing. Appropriate records must enable customs authorities to supervise the procedure.
The operation needs a valid route to discharge the procedure within the period established for inward processing.
A good inward-processing file should be explainable from beginning to end. What entered, why it entered, what happened to it, where it moved, what records support the operation and how the procedure was discharged.
The questions that matter before using the procedure.
Inward processing can create significant operational flexibility, but only when the goods, processing operation, authorisation, customs control and final discharge work as one coherent procedure.
01 What is inward processing?
Inward processing is a special customs procedure under which non-Union goods may be used in the Union customs territory in one or more processing operations without being subject, while correctly under the procedure, to import duty, certain other charges and applicable commercial-policy measures within the scope defined by the UCC.
02 Does inward processing require customs authorisation?
Yes. The use of inward processing requires authorisation from the customs authorities. The authorisation establishes the framework within which the operation may be carried out and supervised.
03 Must the processed products always be re-exported?
No. Re-export is one possible outcome, but it is not the only one. Processed products may, for example, be placed under a subsequent customs procedure or released for free circulation where the applicable conditions are met.
04 Can processed products be released for free circulation?
Yes. If processed products are released for free circulation, the applicable import treatment and other relevant requirements must be determined under the rules governing that operation. The customs-duty calculation should not be assumed to work identically in every inward-processing case.
05 How long can goods remain under inward processing?
The customs authorities specify the period within which the procedure must be discharged. That period takes account of the time required to carry out the processing operations and complete the procedure. A reasonable extension may be granted on a justified application by the holder of the authorisation.
06 Do the imported goods need to be identifiable in the processed products?
In cases other than repair and destruction, the UCC generally requires the goods placed under inward processing to be identifiable in the processed products, without prejudice to the rules concerning production accessories and equivalent goods.
07 What records are needed?
The required records must contain information that enables customs authorities to supervise the procedure, particularly in relation to the identification of the goods, their customs status and their movements.
08 When is inward processing discharged?
Inward processing is discharged when the goods or processed products receive a treatment recognised by the UCC for discharge, such as placement under a subsequent customs procedure or removal from the Union customs territory. The UCC also provides for destruction with no waste remaining and abandonment to the State under the applicable conditions.
A compact route into the legal framework behind the operational explanation on this page.
Authorisation for the use of inward processing and other specified special procedures.
EUR-LEX ↗ ART. 214 RecordsRecords enabling customs authorities to supervise the special procedure.
EUR-LEX ↗ ART. 215 DischargeGeneral rules governing the discharge of special procedures other than transit.
EUR-LEX ↗ ART. 255 Rate of yieldRules for determining the rate or average rate of yield of processing operations.
EUR-LEX ↗ ART. 256 ScopeThe central UCC provision defining the scope of inward processing.
EUR-LEX ↗ ART. 257 Period for dischargePeriod within which inward processing must be discharged and rules for extension.
EUR-LEX ↗Go to the legal and institutional source.
Customs Explorer explains the procedure operationally. For the legal text, formal requirements and current EU guidance, use the official sources.
Consolidated legal text covering special procedures and inward processing.
Commission explanation of the procedure, authorisation, processing and possible treatment of processed products.
Entry point to the UCC and the related delegated and implementing legislation.
Commission guidance supporting the practical application of the Union Customs Code.
Bring goods in. Process under control. Keep the operation traceable. Then give the goods or processed products the correct next customs treatment.