Customs Explorer
⌕

Customs Explorer

CERTEX data flows

EU CUSTOMS SYSTEMS / DATA ARCHITECTURE

CERTEX Data Flows.

How regulatory information moves between Union non-customs systems, EU CSW-CERTEX and national customs environments.

Explore the exchange architecture behind the EU Single Window Environment for Customs: from supporting-document references and regulatory information to customs verification and, where applicable, quantity management.

Interoperability Regulatory Data System-to-System Exchange
LEGAL FRAMEWORK Regulation (EU) 2022/2399

Establishing the European Union Single Window Environment for Customs.

Official legislation
INTEROPERABILITY MODEL

Inside the exchange network

CONCEPTUAL ARCHITECTURE
01 REGULATORY SOURCE

Union Non-Customs Systems

Systems holding regulatory information for specified Union non-customs formalities.

TRACES F-gas Portal Other covered systems
INFORMATION SOURCE Regulatory records
02 UNION EXCHANGE COMPONENT

EU CSW-CERTEX

The Union-level component facilitating information exchanges between participating customs and non-customs systems.

Information exchange Data transformation Relevant verification support
PRIMARY ROLE Interoperability
03 NATIONAL CUSTOMS ENVIRONMENT

National Customs Systems

National single window environments and customs systems supporting the processing of customs declarations.

Declaration references Regulatory checks Customs processing
PRIMARY ROLE Customs procedures

Simplified architectural illustration. Actual information flows, system coverage, technical interfaces and operational availability depend on the applicable Union non-customs formality and implementation arrangements. The arrows illustrate exchanges, not a mandatory chronological processing sequence.

01 / SOURCE Regulatory information

Held in the relevant Union non-customs system.

02 / EXCHANGE EU CSW-CERTEX

Supports interoperable information exchanges.

03 / USE Customs assessment

Information used under applicable customs rules.

01 / Information Architecture

What information actually moves?

EU CSW-CERTEX supports exchanges of information needed for specified Union non-customs formalities. The information involved depends on the applicable legislation, the connected systems and the purpose of the exchange.

THE INFORMATION EXCHANGE MODEL Four essential elements
01 IDENTIFICATION

Document References

Identifiers used to associate a customs declaration with a relevant supporting document or regulatory record held in a Union non-customs system.

EXAMPLE Regulatory document identifier
02 REGULATORY INFORMATION

Document Data & Status

Relevant information about the regulatory document, including its status and other data required for the applicable customs checks.

EXAMPLE Relevant document status
03 INTEROPERABILITY

Data Transformation

Where required, EU CSW-CERTEX transforms information between the relevant customs and non-customs data formats to support interoperability.

FUNCTION Compatible information exchange
04 EXCHANGE RESULT

Regulatory Responses

Information returned through the exchange process can support customs authorities in assessing whether the relevant non-customs requirements have been addressed.

OUTPUT Information for customs assessment
Understanding the Exchange

From a reference to usable information.

The exchange process is not simply a document upload. It connects information already managed in different regulatory environments, using the mechanisms provided by the EU Single Window framework.

01
DECLARATION DATA

The supporting-document reference

A customs declaration may contain a reference to a regulatory document required for the goods concerned. The applicable data requirements determine how that reference must be supplied.

02
UNION NON-CUSTOMS DATA

The relevant regulatory record

The participating Union non-customs system holds information associated with the document or formality. The information available for exchange is governed by the applicable legal and technical rules.

03
EU CSW-CERTEX

Interoperability and transformation

EU CSW-CERTEX facilitates the exchange of relevant information and, where necessary, transforms data to enable communication between the participating systems.

04
CUSTOMS USE

Information supporting regulatory checks

Customs authorities can use the information received when applying the relevant customs and non-customs requirements. The exchange itself does not constitute a decision to release the goods.

Information Categories

The data is formality-specific.

The categories below illustrate information that may be relevant to an exchange. They are not a universal data schema applicable to every CERTEX integration.

01 / IDENTIFIERS Document references

Identifiers linking customs information with regulatory records.

02 / STATUS Regulatory status

Information relevant to the status of the document or formality.

03 / GOODS Goods information

Relevant product or consignment particulars where required.

04 / QUANTITIES Quantity information

Authorised or used quantities where quantity management applies.

05 / OPERATORS Economic operator data

Relevant identifying information where provided for by the applicable rules.

06 / RESULTS Exchange responses

Information returned to support the relevant customs assessment.

Important: information exchange is not regulatory approval.

EU CSW-CERTEX supports the exchange and transformation of relevant data. It does not replace the regulatory decisions of competent authorities or the customs authority’s assessment of whether the conditions for release have been met.

Regulation (EU) 2022/2399 ↗
02 / Operational Sequence

One declaration. One regulatory reference.

Follow a simplified example of how a customs declaration can be associated with regulatory information held in TRACES through EU CSW-CERTEX. The actual workflow depends on the applicable formality and national implementation arrangements.

ILLUSTRATIVE IMPORT SCENARIO

A consignment subject to official controls

A Common Health Entry Document (CHED) is used for a consignment subject to the relevant official control requirements. The declaration refers to the supporting document where required.

REGULATORY SYSTEM TRACES DOCUMENT FAMILY CHED
01
REGULATORY RECORD TRACES

Supporting document recorded

The relevant CHED information is recorded and processed in TRACES under the applicable official-control legislation. Its regulatory status depends on the competent authority’s procedures and decisions.

02
CUSTOMS DECLARATION NATIONAL SYSTEM

Document reference declared

The declarant provides the required supporting-document reference in the customs declaration, using the applicable declaration data requirements.

03
INFORMATION REQUEST EU CSW-CERTEX

Relevant information exchanged

The participating national customs environment exchanges the relevant information through EU CSW-CERTEX with the Union non-customs system. The exchange supports access to the regulatory information needed for the applicable checks.

04
REGULATORY INFORMATION TRACES / CERTEX

Document information made available

Relevant information associated with the CHED is exchanged according to the applicable legal and technical arrangements. The data may support verification of the document reference, status and relevant consignment particulars.

05
CUSTOMS ASSESSMENT CUSTOMS AUTHORITY

Information assessed alongside other requirements

Customs authorities use the information received when assessing the declaration and the applicable customs and non-customs requirements. The exchange does not itself authorise release of the goods.

What the Exchange Can Reveal

Four possible verification outcomes.

These are illustrative categories, not official CERTEX response codes or a universal list of technical message statuses.

01

Information consistent

The available regulatory information is compatible with the relevant declaration particulars and applicable verification conditions.

02

Reference not matched

The supplied document identifier does not correspond to the expected regulatory record, or the relevant information cannot be matched.

03

Regulatory discrepancy

A relevant document status, goods description or other required element is inconsistent with the intended operation.

04

Exchange unavailable

The expected information exchange cannot be completed because of a technical or operational issue. Any alternative handling depends on applicable procedures.

Regulatory verification and customs release are different decisions.

EU CSW-CERTEX facilitates information exchange between participating systems. It does not replace official controls, the powers of competent regulatory authorities or customs decisions under the applicable legislation.

Legal framework ↗
03 / Quantity Management

One authorisation. Multiple customs declarations.

Where quantity management applies, EU CSW-CERTEX supports coordinated checks on quantities covered by regulatory documents. This helps prevent the same authorised quantity from being used beyond the limits permitted by the relevant formality.

ILLUSTRATIVE QUANTITY SCENARIO

How an authorised quantity is consumed

Hypothetical example only. The quantities below are not taken from a real licence, certificate or customs declaration.

EXAMPLE AUTHORISATION 1,000 units
Illustrative quantity allocation 1,000 / 1,000 units
Declaration A — 400 released Declaration B — 350 released Remaining — 250
AUTHORISED 1,000 Illustrative units
RELEASED 750 Across two declarations
REMAINING 250 Before further operations

Simplified arithmetic illustration. Actual availability depends on the document’s validity, regulatory status, quantity units, reservations, prior usage and the rules applicable to the particular Union non-customs formality.

The Two-Stage Mechanism

Reserve first. Write off after release.

Quantity management is not merely a comparison between a declaration and a document. The system must account for what has been requested, what has been reserved and what customs ultimately releases.

STAGE 01 BEFORE RELEASE

Quantity reservation

Following the relevant customs declaration, EU CSW-CERTEX supports a request to reserve the declared quantity in the connected Union non-customs system.

The source system performs the applicable document and quantity checks and returns the result of the reservation process.

Purpose Protect the available authorised quantity
STAGE 02 AFTER CUSTOMS FEEDBACK

Write-off or cancellation

Following feedback from the customs system, the relevant Union non-customs system updates the quantity record according to the outcome of customs processing.

Quantities corresponding to goods released are written off. Where goods are not released, the corresponding reservation is cancelled in accordance with the applicable process.

Purpose Reflect the actual customs outcome
Decision Paths

What happens to a reserved quantity?

The follow-up exchange depends on the result communicated by the customs system.

A / GOODS RELEASED

Write-off

The relevant quantity is recorded as used against the supporting regulatory document, according to the applicable rules.

AUTHORISED BALANCE REDUCED
B / GOODS NOT RELEASED

Reservation cancellation

The reservation is cancelled rather than treating the un-released goods as quantities definitively used.

RESERVED QUANTITY RESTORED
C / VERIFICATION ISSUE

Exception handling

Where automated verification cannot be completed successfully, the applicable control or exceptional handling procedure determines how the case proceeds.

FURTHER ACTION MAY BE REQUIRED
Cross-Border Consistency

Different Member States. One regulatory quantity record.

A supporting authorisation may be used in customs operations involving more than one Member State, where permitted by the applicable legislation. Union-level quantity management helps coordinate the relevant information across national customs environments.

This is particularly important where several declarations refer to the same regulatory authorisation: quantities already used must be taken into account when determining further availability.

NATIONAL ENVIRONMENT A Customs declaration
NATIONAL ENVIRONMENT B Customs declaration
INTEROPERABILITY EU CSW-CERTEX
UNION NON-CUSTOMS SYSTEM Regulatory quantity record Authorised / Reserved / Used

Conceptual representation, not a technical network topology or live integration status.

04 / Exception Management

When data exchange does not go as planned.

An unsuccessful exchange does not always mean that the underlying goods or regulatory document are non-compliant. The cause must be identified before determining the appropriate next step.

EXCEPTION DIAGNOSTICS

Four different problems. Four different responses.

ILLUSTRATIVE CATEGORIES
01
IDENTIFICATION ISSUE

Document reference not matched

The reference supplied in the customs declaration cannot be associated with the expected regulatory record.

Practical response Check the reference, document type, relevant declaration particulars and applicable correction procedure.
02
REGULATORY ISSUE

Document status or data discrepancy

The relevant document status, quantity or consignment information may not satisfy the conditions applicable to the intended customs operation.

Practical response Identify the regulatory requirement involved and consult the competent authority or applicable procedure where necessary.
03
TECHNICAL ISSUE

Electronic exchange unavailable

A technical or operational problem prevents the expected information exchange from being completed. This alone does not establish that the regulatory document is invalid.

Practical response Follow the relevant national incident-handling arrangements and any legally applicable alternative verification process.
04
QUANTITY MANAGEMENT ISSUE

Reservation or write-off not completed

A quantity-related operation may require additional handling when the expected automated reservation, write-off or cancellation cannot be completed.

Practical response Determine the actual customs outcome and apply the relevant exceptional quantity-management procedure without assuming that the quantity record was updated.
Operational Decision Logic

Diagnose first. Apply the correct procedure.

Exception management begins by distinguishing an unavailable exchange from a genuine regulatory discrepancy. The appropriate response depends on the nature of the issue and the applicable legal framework.

STARTING POINT Expected verification not completed
DIAGNOSTIC QUESTION What prevented completion?
PATH A

Data or reference issue

Review the supplied declaration data and determine whether correction is legally possible and required.

PATH B

Regulatory discrepancy

Assess the relevant sector-specific requirement and involve the competent authority where needed.

PATH C

Technical interruption

Follow the applicable technical incident and alternative handling arrangements.

FINAL PRINCIPLE Customs processing remains subject to the applicable legal requirements.
Exceptional Quantity Handling

Automated exchange fails. Quantity records still matter.

Commission Implementing Regulation (EU) 2024/2145 provides rules concerning information exchanges and quantity management, including exceptional handling arrangements.

01 / IDENTIFY

Establish the affected operation

Identify the relevant regulatory document, customs declaration and quantity-management operation.

02 / CONFIRM

Determine the customs outcome

Establish whether the relevant goods were released, not released or remain subject to an unresolved customs procedure.

03 / COORDINATE

Apply the competent procedure

Where the legal conditions for exceptional manual handling are met, the competent authorities follow the applicable arrangements.

04 / RECONCILE

Verify the quantity record

Confirm that the relevant reservation, write-off or cancellation is correctly reflected, avoiding an unsupported assumption that the operation succeeded.

These four steps are an editorial explanation of practical control objectives, not an official EU incident procedure or a prescribed technical sequence. Manual operations must follow the applicable legislation and competent authority arrangements.

Legal & Operational Boundaries

A fallback procedure is not a compliance waiver.

Technical unavailability does not, by itself, remove the obligation to satisfy the applicable customs and non-customs requirements. Equally, a successful electronic exchange does not guarantee that goods may be released.

01

Regulatory requirements remain applicable.

02

Competent authorities retain their legal powers.

03

Customs release requires the applicable conditions to be met.

Legal references

Regulation (EU) 2022/2399 establishes the EU Single Window Environment for Customs. Commission Implementing Regulation (EU) 2024/2145 lays down detailed rules for the relevant information exchanges and quantity management mechanisms.

05 / Technical Reference

CERTEX data flows. Questions answered.

Key technical and regulatory distinctions for customs professionals working with supporting documents, electronic verification and Union non-customs systems.

FREQUENTLY ASKED QUESTIONS Six essential clarifications
01

Does EU CSW-CERTEX store the exchanged certificates?

EU CSW-CERTEX is an information-exchange system, not a general certificate archive. Under Article 6(4) of Regulation (EU) 2022/2399, it does not store the information exchanged between national single window environments and Union non-customs systems, apart from technical logs indicating the supporting documents exchanged and the flow of those exchanges.

02

Does CERTEX change the content of regulatory data?

EU CSW-CERTEX can transform data formats and align terminology where necessary. Article 10(2) of Regulation (EU) 2022/2399 expressly provides for data-format transformation without changing the content of the data.

03

Can one regulatory document support several declarations?

Where the applicable formality permits multiple uses and quantity management applies, information exchanges can support reservation and consumption of quantities across customs operations. This does not mean that every document can be reused or that all formalities follow the same quantity rules.

04

Can customs override automated quantity verification?

Article 8 of Implementing Regulation (EU) 2024/2145 provides for exceptional manual quantity management. Customs authorities may, under their full responsibility and in exceptional circumstances, instruct EU CSW-CERTEX to bypass specified automated verifications and take the actions permitted by that provision.

05

Does a successful exchange authorise customs release?

No. The information exchanged supports the verification of relevant non-customs formalities. Release of goods remains a customs decision governed by the Union Customs Code and the applicable regulatory requirements.

06

Are all Union non-customs systems connected in the same way?

No. The Annex to Regulation (EU) 2022/2399 distinguishes Part A and Part B formalities. Connection obligations, implementation dates and the applicable functions must be assessed for each formality. Additional digital cooperation is also subject to specific legal conditions.

Primary Legislation

The rules behind the information exchange.

These official EUR-Lex texts establish the legal basis for EU CSW-CERTEX and its information-exchange mechanisms.

01 / FRAMEWORK

Regulation (EU) 2022/2399

Establishes the EU Single Window Environment for Customs, EU CSW-CERTEX, national single window environments and the framework for information exchange.

ARTICLES 4–10 ANNEX
Read consolidated text
02 / IMPLEMENTATION

Implementing Regulation (EU) 2024/2145

Sets out technical and operational rules for exchanges through EU CSW-CERTEX, including document verification, quantity management and exceptional manual handling.

ARTICLES 1–9 ANNEXES
Read implementing rules
03 / CUSTOMS LAW

Regulation (EU) No 952/2013

Establishes the Union Customs Code, including rules on customs declarations, supporting documents and release of goods.

ARTICLES 162–163 ARTICLE 194
Read Union Customs Code

Legal references should be read together with the sector-specific legislation governing the relevant non-customs formality. The consolidated text linked above reflects the version dated 17 October 2024; check EUR-Lex for subsequent amendments.

Customs Explorer — Technical Knowledge

Educational explanation of the EU customs single window framework. System behaviour, regulatory coverage and operational availability must be checked against the applicable legislation and official implementation documentation.