CBAM Timeline. Every milestone. One clear picture.
From transitional reporting to the definitive regime, certificate purchases and annual declarations. Explore the key CBAM dates, understand what changes each year and prepare for the obligations ahead.
Navigate the CBAM journey.
The definitive CBAM regime begins.
The definitive regime applies to relevant imports. Importers must assess authorisation requirements, the applicable exemptions and threshold, and the collection of emissions data for annual reporting.
Determine CBAM coverage, establish the responsible declarant and begin collecting annual emissions information.
Dates reflect the applicable EU framework. Future years show the continuing annual cycle, not predictions of unadopted legislative changes.
The CBAM transitional period. Reporting before certificates.
From 1 October 2023 to 31 December 2025, CBAM operated through quarterly reporting rather than certificate purchases and surrender. The transitional phase helped establish emissions-monitoring practices and prepare businesses for the definitive regime.
Three defining characteristics.
Quarterly reports
Reporting declarants submitted information about covered goods imported during each calendar quarter, including quantities, embedded emissions and relevant carbon pricing information.
REPORTING OBLIGATIONEmissions monitoring
Importers and suppliers developed processes to collect production and emissions data. The transitional rules permitted certain methodological flexibilities that narrowed over time.
DATA COLLECTIONNo CBAM certificates
The transitional regime did not require the purchase or surrender of CBAM certificates. Its principal CBAM obligation was reporting, subject to the applicable enforcement rules.
NO CERTIFICATE SURRENDEREvery quarterly reporting deadline.
Nine reporting periods covered the transitional phase. Each report was ordinarily due one month after the end of the relevant quarter.
Although the transitional period ended on 31 December 2025, the report covering October–December 2025 was due by 31 January 2026. This is separate from the definitive regime’s first annual declaration, due in September 2027.
Methodological flexibility gradually narrowed.
The transitional rules were not identical throughout 2023–2025. Businesses had to adapt their emissions data collection as temporary simplifications expired.
Initial reporting flexibility
For the first three quarterly reporting periods, the rules allowed the use of Commission-published transitional default values without a quantitative limit where the applicable conditions were met. Other temporary calculation methods were also available.
Restrictions on estimated emissions
The broad default-value flexibility ended. Under Article 5 of Implementing Regulation (EU) 2023/1773, estimates could still account for up to 20% of total embedded emissions in complex goods, subject to the applicable rules.
EU calculation methodology becomes the standard
The temporary option to use alternative monitoring methods under Article 4(2) expired on 31 December 2024. The EU methodology became the required framework, while the specific estimation allowance for complex goods remained relevant.
Transitional default values and methodological simplifications should not be treated as the rules for calculating emissions under the definitive CBAM regime from 2026. The definitive regime has its own implementing measures and verification requirements.
What information did quarterly reports contain?
Transitional reports connected customs import information with the carbon characteristics of covered goods. The requirements were established by Article 35 of the CBAM Regulation and detailed in Implementing Regulation (EU) 2023/1773.
Read transitional reporting rulesImported goods and quantities
Quantities of each relevant type of CBAM goods, identified using the applicable classification and reporting rules.
Embedded direct emissions
Relevant production emissions calculated under the applicable transitional methodology.
Indirect emissions
Emissions associated with electricity consumption, reported according to the transitional requirements.
Carbon pricing information
Carbon prices due in the country of origin, including relevant rebates or compensation, where applicable.
Transitional reporting
Quarterly emissions reporting under the transitional rules, without CBAM certificate surrender.
Definitive CBAM regime
Authorisation, applicable exemptions, annual declarations and certificate obligations under the definitive framework.
The definitive CBAM regime. From reporting to compliance.
On 1 January 2026, CBAM entered its definitive phase. The system moved beyond transitional emissions reporting to a framework combining importer authorisation, annual declarations, emissions verification and financial obligations through CBAM certificates.
Two phases. Different obligations.
The distinction matters: procedures used for transitional quarterly reports cannot simply be carried over to annual declarations.
Transitional period
REPORTING-FOCUSED PHASEDefinitive regime
ANNUAL COMPLIANCE PHASEWhat must an importer establish?
Follow the key questions in sequence before importing goods that may fall within the CBAM scope.
Are the imported goods covered by CBAM?
Check the CN classification, origin and relevant customs procedure against the Regulation’s product scope and exclusions.
Explore covered goodsDoes the 50-tonne exemption apply?
For goods covered by the mass-based threshold, assess the aggregate net mass imported during the calendar year. Electricity and hydrogen are excluded from this threshold mechanism.
If the threshold is exceeded, the exemption ceases to apply for the relevant imports of that year.
Who is the authorised CBAM declarant?
Identify the importer or indirect customs representative responsible for the CBAM obligations and determine whether the required authorisation is in place.
Article 17 provides a specific temporary derogation for eligible applicants who submitted an authorisation application by 31 March 2026, pending a decision.
Understand authorisationHow will embedded emissions be determined?
Collect the required import and production information. Determine whether to use applicable default values or actual emissions supported by accredited verification under the definitive rules.
Explore emissions reportingHow will the declaration and certificates be managed?
Reconcile annual import quantities and embedded emissions, account for the applicable adjustments and prepare for certificate purchasing and surrender in the following year.
Understand CBAM certificatesWhen each obligation becomes relevant.
The start of the definitive regime, certificate sales and first annual submission are separate legal milestones.
New import and compliance framework begins
The definitive regime applies to relevant goods imported from this date.
Application cut-off for temporary import derogation
Eligible importers or indirect representatives who applied by this date may benefit from the temporary derogation pending an authorisation decision, subject to Article 17.
First definitive reporting year closes
The calendar year 2026 forms the first annual period for the definitive CBAM declaration.
Purchase of CBAM certificates begins
Certificates become available for purchase, including those needed for the 2026 import year.
Submit the declaration and surrender certificates
The first annual CBAM declaration and corresponding certificate surrender cover imports made during 2026.
Imported in 2026. Certificates purchased in 2027.
The postponement of certificate sales does not remove the CBAM financial obligation associated with covered imports made in 2026.
For 2026 imports, certificate prices are determined using the applicable quarterly EU ETS-based pricing mechanism. Purchases begin in February 2027, ahead of the first annual surrender deadline.
Explore certificate pricing and surrenderCovered goods enter the EU. Embedded emissions are determined.
Certificate sales start, including for the 2026 import year.
Submit the 2026 annual declaration and surrender the required certificates.
CBAM deadlines. Know exactly when to act.
CBAM follows a calendar-year reporting cycle. The authorised CBAM declarant accounts for covered imports and embedded emissions during one year, then submits the annual declaration and surrenders the required certificates by 30 September of the following year.
Select your import year.
See the corresponding annual declaration and certificate surrender deadline.
The reporting calendar at a glance.
The statutory deadline is 30 September of the year following the import year.
| Import year | Annual declaration | Certificate surrender | Reporting cycle |
|---|---|---|---|
| 2026 FIRST YEAR | 30 September 2027 | 30 September 2027 | First definitive declaration |
| 2027 | 30 September 2028 | 30 September 2028 | Annual cycle |
| 2028 | 30 September 2029 | 30 September 2029 | Annual cycle |
| 2029 | 30 September 2030 | 30 September 2030 | Annual cycle |
| 2030 | 30 September 2031 | 30 September 2031 | Annual cycle |
Future dates follow Articles 6 and 22 of Regulation (EU) 2023/956, as amended. They are subject to any subsequent legislative changes.
Three different timing rules.
Purchasing certificates, maintaining quarterly holdings and surrendering certificates are distinct obligations.
Certificate purchasing
Authorised declarants can purchase CBAM certificates through the designated system. Certificates corresponding to 2026 imports use the applicable 2026 quarterly price. From 2027, the price is calculated weekly.
Quarter-end holdings
At each quarter-end, the declarant must maintain the prescribed minimum certificate balance, generally corresponding to at least 50% of relevant cumulative embedded emissions, determined under Article 22(2), including the applicable adjustments.
Annual surrender
The declarant surrenders the required certificates through the CBAM Registry for the preceding import year, alongside the annual declaration process. The first surrender occurs in 2027.
Where the annual 50-tonne mass-based threshold is exceeded, Article 22(2a) provides a specific timing rule for compliance with the quarter-end certificate holding obligation. The threshold and its exclusions must be assessed separately from the 50% certificate holding requirement.
How to organise the reporting year.
A suggested internal workflow for importers and customs teams. These are planning stages, not additional statutory deadlines.
Capture import data continuously
Maintain CN codes, customs declaration references, origin, quantities, installation information and relevant emissions data. Monitor the applicable annual threshold.
Reconcile imports and certificate exposure
Compare customs records with supplier emissions information, review applicable certificate prices and, from 2027, assess the statutory quarter-end holdings.
Finalise emissions and verification
Complete the annual dataset, obtain verified actual-emissions information where required and determine the relevant certificate adjustments.
Submit the declaration and surrender
Check the annual declaration against the supporting records and ensure the required certificates are available for surrender by the legal deadline.
CBAM compliance readiness. Turn deadlines into action.
A practical preparation framework for EU importers, customs teams and authorised CBAM declarants. Review the essential controls, identify missing information and track your progress towards annual CBAM compliance.
CBAM Importer Checklist
Mark each control when the corresponding activity has been completed and documented.
Establish whether CBAM applies.
Build reliable emissions information.
Prepare the certificate obligation.
Make annual reporting defensible.
Who should own each part of the process?
A suggested internal allocation of tasks. Legal responsibility remains with the relevant person under the CBAM Regulation.
| Workstream | Typical operational owner | Key evidence |
|---|---|---|
| Import scope & classification | Customs / Trade Compliance | CN codes, customs declarations, origin |
| Threshold monitoring | Customs / ERP Data Team | Annual net mass reconciliation |
| Supplier emissions | Procurement / Sustainability | Installation and emissions records |
| Emissions verification | Compliance / Accredited Verifier | Verification reports, where required |
| Certificate management | Finance / CBAM Declarant | Certificate balances and transactions |
| Annual declaration | Authorised CBAM Declarant | Registry submission and supporting files |
Where compliance processes can fail.
These risks are particularly relevant when import data, supplier information and certificate accounting are managed in separate systems.
Unmonitored annual threshold
Multiple shipments or customs representatives may make it difficult to identify when cumulative imports exceed the threshold.
CONTROL: CENTRALISE ANNUAL NET MASS DATAIncomplete supplier emissions data
Customs information alone may not identify the production installation or provide sufficient emissions evidence.
CONTROL: ESTABLISH SUPPLIER DATA REQUESTSUnplanned certificate exposure
Delaying financial estimates may create unexpected cash requirements when certificate purchasing becomes necessary.
CONTROL: REVIEW ESTIMATED EXPOSURE REGULARLYMismatch between systems
Differences between customs entries, ERP records and emissions datasets may undermine annual reporting accuracy.
CONTROL: PERFORM PERIODIC RECONCILIATIONGood CBAM compliance starts long before the deadline.
The annual declaration is the final output of a year-long process. Reliable classification, supplier coordination, emissions calculations, certificate planning and documentary controls should be maintained throughout the reporting year.
CBAM timeline questions. Clear answers. Official sources.
Understand the most important dates, deadlines and transition rules under the EU Carbon Border Adjustment Mechanism. These answers reflect the definitive regime introduced in 2026 and the legislation applicable at publication.
What importers need to know.
Select a question to expand the answer. For detailed procedures, follow the related guidance links.
01 When did the definitive CBAM regime start?
The definitive CBAM regime started on 1 January 2026, following the transitional reporting period from 1 October 2023 to 31 December 2025.
The definitive system introduces authorisation, annual emissions declarations and CBAM certificate obligations for relevant imports, subject to applicable exemptions.
02 What is the first annual CBAM declaration deadline?
The first annual CBAM declaration is due by 30 September 2027 and covers relevant imports made during calendar year 2026.
Under the current rules, subsequent annual declarations are due by 30 September of the following year. For example, the declaration for 2027 imports is due by 30 September 2028.
CBAM reporting requirements03 Are quarterly CBAM reports still required after 2025?
The transitional quarterly reporting system applied to imports during 2023–2025. The definitive regime uses an annual CBAM declaration instead.
This should not be confused with the separate quarterly certificate holding requirement that applies from 2027 where relevant.
04 When must importers buy CBAM certificates?
Sales of CBAM certificates begin on 1 February 2027. This includes certificates corresponding to covered imports made in 2026.
The certificate price for 2026 imports is determined by the relevant quarterly EU ETS-based reference price. For imports from 2027 onwards, the pricing mechanism uses weekly reference prices.
How CBAM certificates work05 What does the annual 50-tonne threshold mean?
The single mass-based threshold provides an exemption where the aggregate net mass of relevant CBAM goods imported during a calendar year does not exceed 50 tonnes.
Electricity and hydrogen are excluded from this threshold mechanism. If the threshold is exceeded, the exemption no longer applies to the relevant imports of that calendar year, not merely to the quantity above 50 tonnes.
The threshold is subject to the review and adjustment mechanism established by the Regulation.
Check CBAM product scope06 Who needs authorised CBAM declarant status?
An importer, or an indirect customs representative acting in the relevant circumstances, must satisfy the authorisation requirements when importing CBAM goods subject to the definitive obligations.
A specific temporary derogation applies to eligible applicants who submitted their authorisation application by 31 March 2026, pending the competent authority’s decision. The derogation is conditional and is not a general exemption from CBAM.
Authorised CBAM declarant guide07 What is the 50% quarterly certificate requirement?
From 2027, authorised CBAM declarants must maintain the minimum certificate balance prescribed by Article 22(2) at the end of each quarter.
The rule generally requires coverage corresponding to at least 50% of relevant cumulative embedded emissions, calculated using the statutory methodology and applicable adjustments.
The Regulation also provides a specific timing rule where the annual mass-based threshold is exceeded. The 50% certificate rule must not be confused with the separate 50-tonne exemption threshold.
08 Can importers use default emissions values?
The definitive regime provides for applicable default values as well as actual embedded emissions data.
Actual emissions used in the annual declaration require verification in accordance with the applicable rules. Default values must be selected and applied under the relevant EU implementing legislation.
The choice of methodology can materially affect the number of certificates required.
Explore emissions calculations09 What happens if an importer misses a CBAM deadline?
Non-compliance can lead to enforcement measures and penalties under the CBAM Regulation. The consequences depend on the type of breach, the relevant obligations and the applicable legal provisions.
Failure to surrender the required certificates does not remove the underlying surrender obligation. Importers should address identified errors promptly through the appropriate authority and registry procedures.
CBAM customs implicationsFive dates worth remembering.
A concise reference for the transition from reporting to the first definitive annual compliance cycle.
Read the rules at their source.
Primary legislation and European Commission guidance for checking CBAM dates, obligations and implementation.
Legal information should be checked against the latest applicable legislation and implementing acts. Future CBAM deadlines and procedures may change.