Customs Explorer
⌕

Customs Explorer

Product safety controls

EU MARKET SURVEILLANCE / IMPORT COMPLIANCE

Product Safety Controls

A product can cross a border without being legally compliant for the European Union market.

Understand how EU product safety requirements, market surveillance authorities and customs controls interact — from product classification and conformity documentation to suspension or refusal of release for free circulation.

EU 2019/1020 EU 2023/988 MARKET SURVEILLANCE CUSTOMS CONTROLS
EU PRODUCT COMPLIANCE REGULATORY FRAMEWORK
01 / DOCUMENTS Conformity evidence
02 / PRODUCT Marking & traceability
IMPORT CONTROL Risk-based assessment
DOCUMENTATION PRODUCT IDENTITY LEGAL REQUIREMENTS
01 / LEGAL FRAMEWORK Market surveillance

Regulation (EU) 2019/1020 provides the framework for controls on products entering the Union market.

02 / CONSUMER SAFETY General product safety

Regulation (EU) 2023/988 establishes rules for consumer products within its defined scope.

03 / CUSTOMS INTERFACE Suspension or refusal

Authorities can suspend or refuse release for free circulation under the applicable conditions.

04 / KEY PRINCIPLE Release ≠ conformity

Customs release for free circulation does not itself prove compliance with EU product law.

!

Not every product requires CE marking. CE marking is required only where the applicable EU harmonisation legislation provides for it. Product safety, conformity assessment and documentation obligations depend on the actual product and its legal framework.

PRODUCT SCOPE / LEGAL CLASSIFICATION

One product. Several possible legal obligations.

EU product compliance begins with identifying the product and the legislation applicable to it. Customs classification is important, but a CN code alone cannot establish all product safety obligations.

01 / HARMONISED PRODUCTSEU

Sector-specific legislation

Specific EU acts may regulate product design, safety, conformity assessment, documentation, marking and economic operators.

APPLY THE RELEVANT PRODUCT LEGISLATION
02 / CONSUMER PRODUCTSGPSR

General product safety

Regulation 2023/988 establishes general safety requirements for consumer products within its scope, including rules for risks not covered by applicable specific EU safety provisions.

CHECK ARTICLE 2 AND ANY EXCLUSIONS
03 / MARKET SURVEILLANCEMSR

Compliance enforcement

Regulation 2019/1020 establishes a market-surveillance framework and rules for controls on products entering the Union market.

CHECK THE APPLICABLE SCOPE AND ARTICLES
PRODUCT CLASSIFICATION

Identify the product before deciding which rules apply.

These categories illustrate different regulatory pathways. They are not an exhaustive list of EU product legislation.

01

Electrical and electronic equipment

Depending on the product, electrical safety, electromagnetic compatibility, radio equipment and hazardous-substance rules may apply.

EXAMPLES: LVD / EMC / RED / RoHS
02

Toys and children’s products

Products qualifying as toys are subject to specific toy safety legislation. Other children’s products require a separate assessment.

PRODUCT DEFINITION IS CRITICAL
03

Machinery and industrial equipment

Machinery and related products may be subject to dedicated EU requirements for safety, conformity assessment and documentation.

CHECK THE LEGISLATION APPLICABLE ON THE PLACING-ON-MARKET DATE
04

Personal protective equipment

PPE is governed by sector-specific rules, with conformity assessment requirements depending on the relevant risk category.

REGULATION (EU) 2016/425
05

General consumer goods

Consumer products not fully governed by specific EU safety rules may fall within the GPSR, subject to its exclusions and interaction provisions.

REGULATION (EU) 2023/988
06

Products under other specialised regimes

Food, medicines, cosmetics, medical devices and other categories require their own legislative assessment. The GPSR expressly excludes certain product groups.

DO NOT ASSUME ONE UNIVERSAL SAFETY REGIME
CE MARKING / CONFORMITY ASSESSMENT

CE marking is a legal consequence, not a universal import label.

CE
ILLUSTRATIVE MARKING

Not a certificate of approval issued by the European Union.

01

Determine whether the applicable EU legislation requires CE marking.

02

Identify the applicable essential requirements and conformity assessment procedure.

03

Establish whether a notified body must participate or manufacturer assessment is permitted.

04

Verify the required technical documentation, declaration of conformity and product marking.

Important distinction

CE marking does not automatically mean that an independent laboratory or notified body has certified the product. The required assessment procedure depends on the relevant legislation.

ECONOMIC OPERATORS / LEGAL RESPONSIBILITIES

Who is responsible for product compliance?

Responsibilities follow the legal role performed, not simply the commercial title used on an invoice.

MANUFACTURER

Design and compliance

Ensures that the product meets the applicable requirements, performs the required assessments and prepares the necessary documentation.

IMPORTER

Third-country entry into the EU market

Checks the applicable manufacturer obligations and fulfils the importer’s own duties before placing products from a third country on the Union market.

AUTHORISED REPRESENTATIVE

Written mandate

Performs tasks expressly covered by a manufacturer’s written mandate, subject to the limits and requirements of the applicable legislation.

DISTRIBUTOR

Supply-chain diligence

Exercises the checks and cooperation duties applicable to the distributor’s role and does not knowingly make non-compliant products available.

EU RESPONSIBLE OPERATOR

Some products must have a responsible economic operator established in the Union.

Article 4 of Regulation 2019/1020 applies to products covered by the legislation specified in Article 4(5). Article 16 of Regulation 2023/988 establishes a corresponding responsible-operator requirement for products covered by the GPSR, using the relevant tasks under Article 4 of Regulation 2019/1020.

The qualifying operator may be an EU-established manufacturer, importer, duly mandated authorised representative or, under the specified conditions, a fulfilment service provider. This role does not eliminate other economic operators’ legal responsibilities.

DOCUMENTATION / PRE-MARKET REVIEW

What should the importer verify?

01Product identification

Model, type, intended use, manufacturer and applicable legislation.

02Conformity documentation

EU declaration of conformity or other documentation required by the applicable regime.

03Technical evidence

Relevant test reports, technical documentation and assessment records where legally required.

04Marking and traceability

CE marking where mandatory, product identifiers and required economic-operator details.

05Instructions and warnings

Safety information and language requirements applicable in the destination market.

06Responsible operator

Confirm the required EU-established economic operator and its applicable contact information.

A commercial invoice, a supplier’s generic “CE certificate” or a customs declaration cannot by itself establish that every product compliance obligation has been met.
GENERAL PRODUCT SAFETY REGULATION

GPSR coverage is broad, but not unlimited.

ARTICLE 2 / SCOPE

Consumer products and uncovered risks

The GPSR covers consumer products within its defined scope, including certain used, repaired or reconditioned products. Where specific EU product safety requirements apply, the GPSR’s interaction rules determine which provisions remain applicable.

ARTICLE 2(2) / EXCLUSIONS

Some products are expressly excluded

Examples include food, feed, medicinal products, living plants and animals, plant protection products and antiques. Other exclusions and specific conditions must also be checked in the legal text.

OFFICIAL EU REFERENCES

Start with the applicable law, not the marking.

Check the latest consolidated text and the product-specific EU legislation before concluding which obligations apply.

CUSTOMS INTERFACE / ARTICLES 25–28

When a product reaches the border, compliance becomes a customs issue.

Regulation (EU) 2019/1020 establishes a framework for controls on products entering the Union market. Where concerns arise, the authorities responsible for border controls and market surveillance authorities coordinate the next steps.

!
Two authorities. Different responsibilities.

Authorities designated under Article 25 perform controls on products entering the Union market. Market surveillance authorities assess product compliance and determine the regulatory response within their competence. These roles may be performed by different bodies depending on national arrangements.

01 / BORDER CONTROL WORKFLOW

From risk identification to an official decision.

The following sequence explains the coordination mechanism. It is not a mandatory physical inspection sequence for every import declaration.

01
ARTICLE 25 / CONTROL SELECTION

Risk-based product controls

Authorities carry out appropriate controls based on risk analysis. Checks may concern documents, physical characteristics, identification, marking or other elements relevant to compliance.

ASSESS
02
ARTICLE 26 / SUSPENSION

Release for free circulation is suspended

If one of the grounds specified in Article 26 is established during the controls, the designated authority suspends release and immediately notifies the market surveillance authorities.

SUSPEND
03
ARTICLE 26 / AUTHORITY COORDINATION

Market surveillance evaluates the concern

The market surveillance authority may request that the suspension be maintained while it assesses whether the product complies with applicable law or presents a serious risk.

REVIEW
04
ARTICLES 27–28 / OUTCOME

Release or refusal of release

Depending on the authority’s response and the applicable legal conditions, the product may be released for free circulation or its release may be refused.

DECIDE
02 / ARTICLE 26

What can trigger a suspension?

Article 26(1) identifies specific grounds for suspending release for free circulation during the relevant controls.

A

Missing or questionable documentation

Required documentation is absent, or there are reasonable doubts about its authenticity, accuracy or completeness.

B

Incorrect marking or labelling

The product is not marked or labelled as required by the applicable Union legislation.

C

False or misleading conformity marking

A required CE marking or another mandatory marking appears to have been affixed falsely or misleadingly.

D

Required operator details are missing

Information identifying the economic operator covered by Article 4(4) is absent or cannot be identified as required.

E

Other evidence of non-compliance or serious risk

Other circumstances give cause to believe that the product does not comply with applicable Union law or presents a serious risk to protected public interests.

A missing CE mark is not automatically a violation.

It is relevant only if the product is subject to legislation requiring that marking. The legal assessment must identify the applicable product rules first.

03 / ARTICLE 27

The four-working-day rule: what it actually means.

4 WORKING DAYS ARTICLE 27(a)

A response window, not an automatic compliance approval.

Where release has been suspended under Article 26, Article 27 provides for release if all other requirements and formalities are fulfilled and either:

  • the market surveillance authority has not requested maintenance of the suspension within four working days; or
  • the authority has informed the designated border-control authority that it approves release.
Critical distinction

A timely request to maintain suspension prevents the four-day non-response rule from ending the hold. The authority may continue the necessary assessment. Release for free circulation is not evidence that the product complies with EU law.

04 / ARTICLES 27–28

Three possible procedural outcomes.

The result depends on the legal findings and the communication between the competent authorities.

OUTCOME 01

Release for free circulation

Release proceeds when the conditions of Article 27 are satisfied, together with all other applicable customs requirements and formalities.

ARTICLE 27
OUTCOME 02

Suspension maintained

Market surveillance authorities request further time for the necessary assessment. The suspension remains in place pending the relevant decision.

ARTICLE 26(3) / ARTICLE 27
OUTCOME 03

Refusal of release

Where the conditions of Article 28 are met, market surveillance authorities require the designated authorities not to release the product.

ARTICLE 28
05 / ARTICLE 28

Serious risk and non-compliance are not identical findings.

ARTICLE 28(1)

Product presenting a serious risk

The market surveillance authority takes measures prohibiting placing the product on the market and requires refusal of release for free circulation.

OFFICIAL SYSTEM NOTICE Dangerous product — release for free circulation not authorised — Regulation (EU) 2019/1020
ARTICLE 28(2)

Product that may not be placed on the market

Where the authority concludes that the product may not be placed on the market because it does not comply with applicable Union law, it takes the prescribed measures and requires refusal of release.

OFFICIAL SYSTEM NOTICE Product not in conformity — release for free circulation not authorised — Regulation (EU) 2019/1020
Refusal does not automatically mean destruction.

The subsequent customs treatment and any enforcement measures depend on the applicable legal provisions and the competent authorities’ decisions. Article 28(4) also provides for destruction or rendering products inoperable under specified conditions.

06 / PRACTICAL CUSTOMS FILE

What should the customs team prepare?

These are practical supporting records, not a claim that every listed document is legally mandatory for every product.

01Precise product identity

Model, technical description, manufacturer, intended use and CN code.

02Applicable legislation

Identify the relevant sector-specific requirements and any GPSR obligations.

03Conformity evidence

Declaration of conformity, test records or other required documents, as applicable.

04Marking and traceability

Product and packaging photographs, labels, identifiers and operator details.

05Authority communications

Suspension notice, information requests, responses and official decisions.

06Customs consistency

Ensure the intended customs treatment is compatible with the official decision.

THE CENTRAL PRINCIPLE

Customs release is not a product compliance certificate.

The absence of a border objection does not eliminate the economic operator’s duties or prevent subsequent market surveillance measures.

REGULATION (EU) 2019/1020 ARTICLE 27
EVIDENCE / ENFORCEMENT / EU INFORMATION SYSTEMS

Beyond the border check. Evidence, corrective action and traceability.

When an imported product raises a compliance concern, the response depends on the applicable legislation, the evidence available and the competent authority’s assessment. EU information systems support cooperation, but they do not replace the legal decision.

01 / CONTROL METHODS

What can the authorities examine?

Controls may combine documentary examination, identification, physical inspection and testing. The depth of the examination is risk-based and depends on the product and circumstances.

01

Documentary verification

Examination of declarations of conformity, technical evidence, product descriptions and other documents required under the relevant legislation.

DOCUMENTS & LEGAL SCOPE
02

Identity and marking checks

Comparison of the actual product with its documentation, including model references, required marking, warnings and economic-operator details.

IDENTIFICATION & TRACEABILITY
03

Physical examination

Inspection of the product, packaging or accessible characteristics where needed to assess potential non-compliance or risk.

PHYSICAL CONTROL
04

Testing and technical assessment

Laboratory testing or specialist examination where justified. Test methods and acceptance criteria depend on the applicable product requirements.

TECHNICAL EVIDENCE
A document’s existence is not proof of compliance.

A declaration, test report or certificate must relate to the actual product and the correct legal requirements. Conversely, a particular certificate must not be demanded merely because it is common in another product sector.

02 / CORRECTIVE ACTION

What happens when non-compliance is identified?

Regulation (EU) 2019/1020, particularly Article 16, provides for appropriate and proportionate market surveillance measures for products covered by Union harmonisation legislation. The GPSR applies relevant enforcement provisions through its Article 23.

01

Identify the legal requirement

Establish which product-specific or general safety obligation is not satisfied, and whether the issue concerns a safety risk, documentary deficiency or another form of non-compliance.

02

Determine the appropriate response

The competent authority assesses the risk and legal circumstances and may require proportionate corrective action from the relevant economic operator.

03

Implement and document measures

Depending on the case, measures may involve correcting documentation or marking, bringing products into conformity, restricting supply, withdrawal or recall.

04

Verify the official outcome

The operator should preserve the authority’s instructions, supporting evidence and final decision before proceeding with any affected customs or market activity.

03 / SUPPLY-CHAIN TRACEABILITY

One model number can connect an entire investigation.

Reliable product identification allows the operator and competent authorities to determine which goods are affected and where they have been supplied.

ILLUSTRATIVE TRACEABILITY RECORD PRODUCT FILE / MODEL EX-240
PRODUCTModel / type

Exact technical and commercial identification

PRODUCTIONBatch / serial

Lot or serial information where applicable

ORIGINManufacturer

Identity and relevant contact details

EU OPERATORImporter / responsible person

Applicable EU economic-operator information

IMPORTCustoms records

Declaration and shipment references

DISTRIBUTIONCustomers / destinations

Supply-chain records needed to identify affected goods

04 / EUROPEAN INFORMATION SYSTEMS

ICSMS, Safety Gate and the Safety Business Gateway.

These systems are connected to product compliance, but they serve different users and purposes.

AUTHORITY INFORMATION EXCHANGE ICSMS

Information and Communication System for Market Surveillance

ICSMS supports the collection and exchange of market surveillance information, including relevant product investigations, test findings and enforcement measures, under Article 34 of Regulation 2019/1020.

Market surveillance cooperation Product investigation records Information exchange with border authorities
ICSMS system
RAPID ALERT / PUBLIC INFORMATION Safety Gate

EU rapid alert system for dangerous non-food products

The Safety Gate Rapid Alert System supports notification and exchange of information on corrective measures concerning dangerous products. Its public portal makes selected notifications accessible to consumers and businesses.

Dangerous-product alerts Corrective measures and recalls Publicly accessible alert information
Safety Gate alerts
ECONOMIC OPERATOR NOTIFICATIONS Business Gateway

Safety Business Gateway

The Safety Business Gateway enables economic operators and online marketplaces to submit specified product safety information to authorities, including notifications required under the GPSR. It is not a customs clearance system.

Operator safety notifications Specified incident reporting Communication of corrective measures
European Commission business gateway
ICSMSAuthority information exchange
SAFETY GATEDangerous-product alerts and public information
BUSINESS GATEWAYSpecified operator notifications
05 / COORDINATION

How a product safety concern can move across authorities.

STEP 01

Concern identified

Border control, market surveillance activity or other relevant information.

STEP 02

Authority assessment

Evidence, product identification, risk and applicable legislation.

STEP 03

Measures and information exchange

Relevant decisions and notifications through the appropriate channels.

This is a simplified illustration, not an automatic sequence of system notifications. The legal conditions for each communication must be satisfied.

06 / IMPORTER RESPONSE FILE

Build a defensible compliance record.

01Identify the exact product

Model, batch, serial number and technical description.

02Establish applicable legislation

Identify the specific EU requirements and the responsible economic operator.

03Collect conformity evidence

Obtain required declarations, technical records, instructions and marking evidence.

04Record authority communications

Preserve requests, suspension notices, findings and decisions.

05Assess affected consignments

Match model and batch information against customs and distribution records.

06Document corrective action

Record measures taken, their implementation and any official confirmation.

PRACTICAL CASES / SPECIAL IMPORT SITUATIONS

The same product. Different routes to compliance.

Product safety obligations cannot be determined by the customs declaration alone. The product’s characteristics, intended use, commercial circumstances and applicable EU legislation must be assessed together.

SCENARIO 01 / E-COMMERCE 01

Direct-to-consumer imports

A consumer purchases a product from a seller established outside the European Union. The goods are shipped directly to the consumer or through a fulfilment network.

Key question

Who is legally responsible for the product, and which EU safety rules apply?

  • Assess whether the product is offered to consumers in the Union.
  • Identify applicable product-specific rules and GPSR obligations.
  • Verify the EU-established responsible operator where required.
  • Check product identification, warnings and online offer information.
COMMON MISTAKE

Assuming that a low-value parcel or direct shipment is exempt from product safety requirements.

SCENARIO 02 / CE MARKING 02

Products without mandatory CE marking

A household consumer product arrives without CE marking. The importer assumes that the absence of the marking automatically prevents its sale.

Key question

Does the legislation applicable to this particular product actually require CE marking?

  • Identify the product’s intended purpose and characteristics.
  • Determine whether CE-marking legislation applies.
  • Check the GPSR and any other relevant safety provisions.
  • Verify required labelling, traceability and instructions.
COMMON MISTAKE

Treating CE marking as a universal requirement for every product imported into the EU.

SCENARIO 03 / SAMPLES 03

Samples and demonstration units

A company imports prototypes or commercial samples for evaluation, testing or demonstration rather than immediate retail distribution.

Key question

Will the product be placed on the market, made available, put into service or used under another legally relevant circumstance?

  • Document the actual purpose and conditions of importation.
  • Distinguish laboratory evaluation from commercial supply.
  • Check any sector-specific exhibition or demonstration provisions.
  • Assess safety obligations during testing and use.
COMMON MISTAKE

Assuming that “sample”, “prototype” or “no commercial value” automatically removes regulatory obligations.

SCENARIO 04 / SECOND-HAND GOODS 04

Used and refurbished products

An importer purchases second-hand equipment or refurbished consumer products from a third country for resale or further use in the Union.

Key question

Which obligations apply to this product in its current condition and market circumstances?

  • Identify the original product, modifications and refurbishment.
  • Determine whether the GPSR or sector-specific legislation applies.
  • Assess whether substantial modification affects legal responsibilities.
  • Check the product’s actual safety, documentation and traceability.
COMMON MISTAKE

Assuming that a product is exempt merely because it was manufactured or used before importation.

SCENARIO 05 / PROFESSIONAL EQUIPMENT 05

Industrial and professional-use products

A business imports machinery, electrical equipment or specialised devices intended exclusively for professional operations.

Key question

Does the product fall under sector-specific harmonisation legislation, and is it also within the GPSR’s consumer-product scope?

  • Establish the intended use and relevant product definitions.
  • Identify machinery, electrical or other applicable legislation.
  • Check conformity assessment and technical documentation.
  • Distinguish placing on the market from putting into service.
COMMON MISTAKE

Assuming that professional use eliminates EU product conformity obligations.

SCENARIO 06 / REBRANDING 06

Private-label and modified products

An EU business imports products manufactured abroad and markets them under its own name or trademark, or modifies them before distribution.

Key question

Has the EU business assumed manufacturer obligations under the applicable legislation?

  • Check whether the product is marketed under the business’s own brand.
  • Assess modifications and their potential impact on safety.
  • Determine the resulting manufacturer and importer responsibilities.
  • Ensure technical evidence corresponds to the actual marketed product.
COMMON MISTAKE

Believing that the original overseas manufacturer’s documents always discharge the EU brand owner’s duties.

07 / DECISION MATRIX

Which question should come first?

Use the situation to identify the correct legal enquiry. None of these descriptions creates an automatic exemption.

Import situation First regulatory question Main risk of error
Online consumer purchase Which product rules and distance-selling obligations apply? Confusing low customs value with a safety exemption
Product without CE marking Is CE marking legally mandatory for this product? Applying CE rules to an unrelated product category
Prototype or sample How will the product be supplied, demonstrated or used? Assuming the customs description determines regulatory scope
Used or refurbished product What rules apply to its condition and supply circumstances? Assuming previous use eliminates compliance duties
Professional equipment Which sector-specific product legislation applies? Assuming non-consumer use means no conformity assessment
Private-label import Who is legally considered the manufacturer? Misidentifying the responsible economic operator
08 / PRACTICAL EXAMPLE

A shipment of electronic accessories arrives from outside the EU.

ILLUSTRATIVE CASE / NOT AN OFFICIAL DECISION SHIPMENT: 2,400 UNITS
THE SITUATION

One shipment. Several product models.

The importer declares a mixed consignment of electronic accessories. The supplier provides one generic conformity certificate, but the goods have different model numbers, technical functions and markings.

THE PROBLEM

Evidence does not identify every product.

It is unclear whether the document covers all models. Different items may fall under different EU legislation, and some may require additional declarations, testing or specific product information.

APPROPRIATE COMPLIANCE APPROACH
  1. Separate the products by model and technical function.
  2. Determine the legislation applicable to each product category.
  3. Match each required declaration and technical record to the corresponding model.
  4. Verify markings, instructions and economic-operator identification.
  5. Where an official control is underway, follow the competent authority’s instructions before taking further action.
LESSON

Compliance must be established for the actual products, not inferred from a single generic document covering an entire shipment.

09 / THREE DIFFERENT LEGAL QUESTIONS

Customs status does not determine product safety status.

01

Customs treatment

Which customs procedure applies, and what duties, taxes or formalities are required?

02

Product compliance

Which EU product requirements must be fulfilled for the intended placing on the market or other regulated activity?

03

Market surveillance

What action may the competent authority take if the product is non-compliant or presents a risk?

Important:

Customs duty relief, a special customs procedure, a commercial description or a low declared value does not automatically create an exemption from applicable product safety law. Equally, the precise product-law obligations depend on whether the relevant legal conditions are met.

FINAL GUIDANCE / FAQ / IMPORT READINESS

Before the goods arrive. Know what must be compliant.

Product safety is not a single certificate or a universal customs requirement. A reliable import process starts with product identification, legal classification and verification of the economic operators’ obligations.

01 / PRE-IMPORT CHECKLIST

Eight checks before arranging shipment.

A practical screening sequence for importers and customs teams. The documents and obligations required depend on the legislation applicable to each product.

01

Identify the actual product

Record the manufacturer, model, technical characteristics, intended use and relevant product identifiers. Do not rely solely on a generic invoice description or CN code.

PRODUCT IDENTITY
02

Determine the applicable EU legislation

Check sector-specific harmonisation requirements, the General Product Safety Regulation where applicable, and any other relevant product restrictions.

LEGAL SCOPE
03

Identify the responsible economic operators

Establish the manufacturer, importer and any EU-established economic operator required under Article 4 of Regulation 2019/1020 or Article 16 of the GPSR, as applicable.

RESPONSIBILITY
04

Verify conformity assessment requirements

Determine whether the product requires a conformity assessment procedure, EU declaration of conformity, technical documentation or notified-body involvement.

CONFORMITY EVIDENCE
05

Check markings and product information

Verify CE marking only where required, together with mandatory product identification, operator contact details, warnings, instructions and relevant language requirements.

MARKING & LABELLING
06

Match documentation to the goods

Confirm that declarations, test records and technical information relate to the specific product model, version or configuration being imported.

DOCUMENT CONSISTENCY
07

Prepare for possible border controls

Keep supporting evidence accessible and establish a process for responding to requests from customs and market surveillance authorities.

BORDER READINESS
08

Preserve traceability and authority decisions

Link products and batches to import records and distribution information. Follow any official suspension, refusal or corrective-action decision.

ONGOING COMPLIANCE
Operational recommendation

Perform this review before dispatch from the third country. Discovering missing technical documentation after the goods reach the border can create delays, storage costs and regulatory complications.

02 / FREQUENTLY ASKED QUESTIONS

Product safety controls: essential answers.

Concise explanations of common questions raised by importers, freight forwarders and customs professionals.

01 Does every product imported into the EU require CE marking?

No. CE marking is required only for products covered by EU legislation that specifically provides for it. Products outside those categories must not be treated as requiring CE marking merely because they are imported. Other product safety, identification and labelling obligations may nevertheless apply.

02 Is an EU declaration of conformity always mandatory?

No. An EU declaration of conformity is required under particular harmonisation legislation. The GPSR does not impose a universal EU declaration of conformity on every consumer product. The applicable legal framework determines which evidence must be prepared and retained.

03 Can customs suspend a shipment because of product safety concerns?

Yes. Under Articles 25 and 26 of Regulation (EU) 2019/1020, designated authorities carry out risk-based controls on products entering the Union market and suspend release for free circulation where the statutory grounds are established.

04 Does the four-working-day rule guarantee customs release?

No. Article 27 establishes a response mechanism after suspension under Article 26. Release is subject to all other requirements and formalities being fulfilled. A timely request from market surveillance authorities to maintain the suspension prevents the non-response mechanism from ending the hold.

05 Does customs release prove that the product complies with EU law?

No. Article 27 of Regulation (EU) 2019/1020 expressly states that release for free circulation is not proof of conformity with Union law. Economic operators remain subject to applicable product obligations and subsequent market surveillance.

06 Are goods purchased online from outside the EU exempt?

No general product safety exemption arises merely because a purchase is made online or shipped directly to a consumer. Under Article 4 of the GPSR, online offers targeted at consumers in the Union can constitute making products available on the Union market. The applicable obligations depend on the product and the circumstances.

07 Do product safety rules apply to used or refurbished goods?

They can. Article 2(3) of the GPSR covers new, used, repaired and reconditioned products within its scope. It provides a specific exclusion for products offered for repair or reconditioning before use and clearly marked accordingly. Other sector-specific legislation may also need to be considered.

08 Can a supplier’s generic conformity certificate be sufficient?

Not necessarily. The importer must identify the applicable legal requirements and verify that the relevant conformity evidence corresponds to the actual product. A generic commercial certificate does not automatically replace a legally required declaration, technical file or conformity assessment.

09 Who is responsible when a product is imported under a private label?

An operator placing a product on the market under its own name or trademark may assume manufacturer obligations under the applicable legislation. The precise responsibilities depend on the legal regime, including any rules concerning substantial modification of products.

10 What is the difference between ICSMS and Safety Gate?

ICSMS supports market surveillance information exchange between competent authorities. Safety Gate supports rapid alerts concerning dangerous non-food products and includes a public information portal. Neither is a substitute for the applicable customs or product compliance procedures.

03 / REGULATORY FRAMEWORK

The principal legal instruments.

Start with the consolidated versions of the applicable regulations and then identify any sector-specific product legislation.

GENERAL PRODUCT SAFETY

Regulation (EU) 2023/988

General Product Safety Regulation (GPSR). Covers general consumer product safety, economic operators, distance sales and relevant enforcement and notification obligations within its scope.

Key provisions: Articles 2, 4, 5, 9–16 and 23.
Consolidated text
MARKET SURVEILLANCE & BORDER CONTROLS

Regulation (EU) 2019/1020

Establishes market surveillance provisions and controls on products entering the Union market, including suspension and refusal of release for free circulation.

Key provisions: Articles 4, 11, 14–16, 25–28 and 34.
Official regulation
COMMON PRODUCT LEGISLATIVE FRAMEWORK

Decision No 768/2008/EC

Provides a common framework for marketing products, including reference provisions on economic operators and conformity assessment used in sector-specific EU harmonisation legislation.

Its reference provisions are not a universal standalone product approval procedure.
Official decision
CUSTOMS LEGISLATION

Regulation (EU) No 952/2013

Union Customs Code. Establishes the customs framework, including risk-based customs controls and the conditions governing customs procedures.

Product safety obligations remain distinct from customs classification and duty assessment.
Official regulation
FINAL COMPLIANCE PRINCIPLE

Identify the product. Identify the law. Verify the evidence.

A compliant import is not established by a customs declaration, a CE logo or a supplier’s assurance alone. The relevant economic operators must satisfy the requirements applicable to the actual goods and their intended placement on the Union market.

Customs Explorer provides general educational information. Requirements depend on the product, applicable legislation, factual circumstances and competent authorities’ decisions. Always consult current consolidated EU legislation and relevant national implementing measures.