Customs Explorer
⌕

Customs Explorer

EU CUSTOMS PROCEDURES

Customs procedures — choose the route that matches the goods.

A customs procedure defines what is being requested for the goods. The right route depends on whether they will enter the Union market, move under customs control, be stored, used temporarily, processed or exported.

QUICK ANSWER

Under the Union Customs Code, the main procedural routes are release for free circulation, special procedures and export. Special procedures are organised into transit, storage, specific use and processing.

PROCEDURE ROUTER WHAT HAPPENS TO THE GOODS?
UCC ROUTING
START
COMMERCIAL INTENTION WHAT DO YOU NEED TO DO?
01
ENTER THE UNION MARKET FREE CIRCULATION
→
02
MOVE UNDER CUSTOMS CONTROL TRANSIT
→
03
STORE BEFORE THE NEXT STEP STORAGE
→
04
USE FOR A SPECIFIC PURPOSE SPECIFIC USE
→
05
PROCESS THE GOODS PROCESSING
→
06
TAKE UNION GOODS OUT EXPORT
→

The procedure follows the intended operation — not simply the fact that goods crossed a border.

AT A GLANCE
MARKET Free circulation
MOVE / STORE Transit & storage
USE / PROCESS Special procedures
LEAVE THE EU Export
UCC PROCEDURE MAP

One customs framework. Different routes for the goods.

The Union Customs Code separates the main customs routes according to what is intended for the goods. Special procedures form their own family, covering transit, storage, specific use and processing.

LEVEL 01 MAIN ROUTES
SPECIAL PROCEDURES
LEVEL 02 SPECIAL PROCEDURES — ARTICLE 210 UCC

Four categories organise the special-procedure framework.

01 MOVE

Transit

Goods move between customs points under the transit procedure while the relevant customs treatment is suspended or deferred.

EXTERNAL T1
INTERNAL T2
EXPLORE TRANSIT →
02 STORE

Storage

Goods can remain under a customs storage arrangement before their subsequent customs destination is determined.

PROCEDURE Customs warehousing
PROCEDURE Free zones
GUIDE PLANNED
03 USE

Specific use

Goods are placed under a procedure because of the way they will be used within the customs territory.

PROCEDURE Temporary admission
PROCEDURE End-use
GUIDES PLANNED
04 PROCESS

Processing

Customs procedures allow goods to be processed under defined conditions inside or outside the Union customs territory.

PROCEDURE Inward processing
PROCEDURE Outward processing
GUIDES PLANNED
READ THE STRUCTURE
MAIN ROUTE Special procedures
CATEGORY Transit / Storage / Use / Processing
PROCEDURE T1, warehousing, temporary admission…
OPERATION Apply the route to the goods
IMPORTANT DISTINCTION Temporary storage and customs warehousing are not the same thing.

Temporary storage describes the position of non-Union goods after presentation to customs and before they are placed under a customs procedure or re-exported. Customs warehousing, by contrast, is a special customs procedure within the storage category.

SPECIAL PROCEDURE LIFECYCLE

A special procedure is a controlled customs state.

Placing goods under a special procedure is not the end of the customs operation. Conditions must continue to be respected while the goods remain under the procedure, until it is properly discharged or otherwise brought to an end.

PROCEDURE CONTROL MODEL FROM ENTRY TO DISCHARGE
CUSTOMS SUPERVISION
01 SET UP
CONDITIONS Prepare the procedure

Identify the procedure, the parties, the goods and the conditions that must be satisfied before the operation starts.

02 AUTHORISE
WHERE REQUIRED Obtain authorisation

Some special procedures require a customs authorisation and defined conditions for their use.

03 PLACE
DECLARATION Place the goods

The goods are placed under the relevant procedure through the applicable customs formalities.

04 CONTROL
PROCEDURE ACTIVE Respect the conditions

Movement, storage, use or processing must remain consistent with the procedure and with the obligations attached to it.

05 DISCHARGE
PROCEDURE END Complete the route

The procedure must be discharged in the manner required for that operation, or otherwise brought to an end under the applicable customs rules.

CONTROL LAYER
AUTHORISATION Where required
GUARANTEE Where required
RECORDS Where applicable
TIME / CONDITIONS Procedure-specific
SUPERVISION Customs control
WHAT CHANGES UNDER THE PROCEDURE

Customs treatment follows the goods until the procedure is closed.

The exact obligations differ between transit, storage, specific use and processing. But the common principle is that the goods remain connected to a defined customs route and its conditions.

01
The goods remain identifiable

Customs must be able to connect the goods and the operation to the procedure being used.

02
Conditions continue after placement

Compliance is not limited to lodging the declaration. Procedure-specific obligations may continue throughout the operation.

03
Customs control remains relevant

The procedure determines what may happen to the goods while they remain under customs supervision.

04
The end of the procedure matters

A special procedure must reach the appropriate customs outcome. Leaving the operation unresolved can create customs consequences.

THE KEY CONCEPT DISCHARGE

Think of discharge as the point at which the obligations attached to the procedure are properly resolved for the goods concerned. The exact route depends on the procedure.

GOODS Under special procedure
OPERATION Conditions fulfilled
OUTCOME Procedure discharged
OPERATIONAL PRINCIPLE

Do not look only at how a special procedure starts. Before using it, understand how the goods will move through the procedure, which obligations apply while it is active and how the procedure will be properly completed.

CHOOSING THE ROUTE

Start with the operation — then find the procedure.

Customs procedures should reflect what is actually intended for the goods. Start with the commercial operation, then identify the customs route and the conditions that apply to it.

?
START HERE What needs to happen to the goods?
ROUTE BY INTENTION
01
SELL OR USE IN THE EU The non-Union goods are intended to enter the Union market.
ROUTE Release for free circulation
EXPLORE →
02
MOVE The goods need to move under customs control before their next customs treatment.
ROUTE Transit
EXPLORE →
03
STORE The goods need to remain in storage under a customs procedure before the next step is decided.
ROUTE Customs warehousing
GUIDE PLANNED
04
USE TEMPORARILY Non-Union goods will be used temporarily in the EU and are intended to leave again under the applicable conditions.
ROUTE Temporary admission
GUIDE PLANNED
05
USE FOR A DEFINED PURPOSE Goods are to be released for free circulation with duty treatment linked to a prescribed end-use.
ROUTE End-use
GUIDE PLANNED
06
PROCESS IN THE EU Non-Union goods are brought into the EU to undergo processing operations under customs control.
ROUTE Inward processing
GUIDE PLANNED
07
PROCESS OUTSIDE THE EU Union goods are temporarily exported for processing and the resulting products are intended to return to the EU.
ROUTE Outward processing
GUIDE PLANNED
08
LEAVE THE EU Union goods are intended to leave the customs territory of the Union as an export operation.
ROUTE Export
EXPLORE →
ROUTING LOGIC
1 Define the commercial operation
2 Identify the customs route
3 Check eligibility and conditions
4 Plan how the route ends
SAME GOODS — DIFFERENT ROUTE

The intended operation can change the customs treatment.

EXAMPLE Non-Union industrial equipment
SELL PERMANENTLY IN EU Free circulation
USE TEMPORARILY Temporary admission
PROCESS / MODIFY Inward processing
STORE BEFORE DECISION Customs warehousing
OPERATIONAL PRINCIPLE

The procedure should follow the intended customs operation. Do not choose a route simply because it is familiar or because the goods have entered or are leaving the EU. Identify what will happen to the goods, then verify the legal conditions of the corresponding procedure.

BEFORE YOU USE THE PROCEDURE

Check the conditions before the goods enter the route.

Choosing a special procedure is only the first step. Before the operation starts, establish whether the procedure fits the goods, the operator and the intended operation — and understand how it will be controlled and completed.

SPECIAL PROCEDURE READINESS PRE-OPERATION CHECK
CHECK BEFORE PLACEMENT
01
FIT Does the procedure match the operation?

Define what will happen to the goods and confirm that the selected procedure corresponds to that intended customs operation.

ELIGIBILITY
02
AUTHORISATION Is customs authorisation required?

Inward and outward processing, temporary admission and end-use require authorisation. Authorisation is also required to operate customs warehousing facilities, except where Customs operates the facility itself.

AUTHORITY
03
FINANCIAL COVER What guarantee arrangements apply?

Determine whether a guarantee is required to cover a customs debt or other charges that may arise, taking account of the procedure and any applicable exceptions or waivers.

GUARANTEE
04
CONTROL Can the operation be supervised?

The goods, their customs status and their movements must remain capable of customs supervision. Where the UCC requires records, they must contain the information needed for that supervision.

RECORDS
05
CONDITIONS What must remain true during the procedure?

Identify procedure-specific conditions, permitted operations, relevant time limits and any obligations attached to the authorisation or customs operation.

COMPLIANCE
06
EXIT PLAN How will the procedure be discharged?

Plan the customs outcome before the operation begins. For special procedures other than transit, discharge may involve placing the goods or processed products under a subsequent customs procedure, taking them out of the Union customs territory or another outcome provided for by the UCC.

DISCHARGE
DECISION GATE

Do not start with the declaration.

Start with the complete customs operation. The declaration places the goods under the procedure, but the procedure must also work operationally before, during and at the end of the route.

01 INTENTION What happens to the goods?
02 PROCEDURE Which customs route fits?
03 CONDITIONS Can the route be used?
04 DISCHARGE How will it end?
IF THE OPERATION CHANGES

A customs route should not drift away from the real operation.

CHANGE The commercial plan changes

Re-check whether the existing procedure still corresponds to what will actually happen to the goods.

CHECK Conditions or authorisation

Determine whether the changed operation remains within the conditions of the procedure and any authorisation that applies.

ROUTE Plan the next customs treatment

Where necessary, move the goods into the appropriate subsequent customs procedure or other permitted customs outcome.

CLOSE Discharge the original procedure correctly

The original procedure must not simply be left unresolved when the commercial operation changes.

UCC CONTROL POINTS
ARTICLE 211 Authorisation
ARTICLE 214 Records
ARTICLE 215 Discharge
PLANNING PRINCIPLE

Plan the exit before you enter the procedure. A special procedure works best when the operator understands not only why the goods are being placed under it, but also the controls, evidence and customs outcome required to complete the operation.

FREQUENTLY ASKED QUESTIONS

EU customs procedures — key questions.

The essential distinctions behind free circulation, transit, storage, specific use, processing and export under the Union customs framework.

01 What are the main customs procedure routes under the UCC? +

At a high level, goods may move through release for free circulation, special procedures or export. The special procedures are grouped into transit, storage, specific use and processing.

02 What are the four categories of special procedures? +

Article 210 UCC identifies transit, storage, specific use and processing. Transit comprises external and internal transit; storage comprises customs warehousing and free zones; specific use comprises temporary admission and end-use; and processing comprises inward and outward processing.

03 Does every special procedure require an authorisation? +

No. The authorisation rules depend on the procedure. Article 211 UCC expressly requires authorisation for inward and outward processing, temporary admission and end-use, and for operating customs warehousing facilities unless the customs authority itself operates the facility.

04 Are temporary storage and customs warehousing the same? +

No. Customs warehousing is a special procedure within the storage category. Temporary storage describes a different customs situation before non-Union goods are placed under a customs procedure or re-exported.

05 What does discharge of a special procedure mean? +

Discharge is the customs completion of the procedure. For special procedures other than transit, Article 215 UCC provides for discharge through specified outcomes, including placement under a subsequent customs procedure or taking the goods out of the Union customs territory. Transit has its own discharge rule.

06 Is outward processing an export procedure? +

Outward processing involves Union goods being temporarily exported for processing outside the EU, but under the UCC it belongs to the special-procedure category of processing. It is therefore distinct from an ordinary definitive export.

07 How should a business choose a customs procedure? +

Start with the intended operation for the goods: enter the Union market, move, store, use temporarily, use for a defined purpose, process, or leave the EU. Then verify the legal and operational conditions of the corresponding customs route.

EXPLORE THE SPECIAL PROCEDURES From the framework to the individual procedure.
STORAGE Customs Warehousing NEXT GUIDE
PROCESSING Inward Processing PLANNED
SPECIFIC USE Temporary Admission PLANNED
PROCESSING Outward Processing PLANNED
INTERACTIVE LEARNING TOOL Not sure which customs procedure to explore?

Use Customs Journey to explore possible EU customs routes, then return to these guides to check the applicable requirements.

Explore Customs Journey →
EU CUSTOMS PROCEDURES Start with the goods. Understand the operation. Choose the route.

Then check the conditions, control the procedure and plan how the customs operation will end.