Customs Explorer
⌕

Customs Explorer

EU SPECIAL PROCEDURE · STORAGE

Customs warehousing — store now, decide the next customs route later.

Non-Union goods can be stored in an authorised customs warehouse under customs supervision before their next customs treatment is determined.

QUICK ANSWER

Customs warehousing is an EU special procedure that allows non-Union goods to remain in an authorised customs warehouse under customs supervision without becoming subject to the normal import treatment simply because they are being stored. Their next customs route can be decided later.

WAREHOUSE CONTROL ENGINE GOODS UNDER CUSTOMS SUPERVISION
PROCEDURE ACTIVE
01
INBOUND NON-UNION GOODS
02 · STORAGE STATE CUSTOMS WAREHOUSE
CONTROLLED
A
B
C
D
STATUS NON-UNION
SUPERVISION CUSTOMS
STORAGE ACTIVE
WHILE UNDER THE STORAGE PROCEDURE
IMPORT DUTY NOT YET DUE
OTHER CHARGES SUSPENDED*
TRADE POLICY UCC CONDITIONS
* Subject to the applicable customs and other relevant provisions.
03 · NEXT CUSTOMS ROUTE WHAT HAPPENS NEXT?
EU MARKET FREE CIRCULATION
PROCESS INWARD PROCESSING
MOVE TRANSIT
LEAVE RE-EXPORT

Storage postpones the next customs treatment — it does not eliminate the need to determine what happens next.

AT A GLANCE
PROCEDURE FAMILY Storage
GOODS Primarily non-Union
LOCATION Authorised warehouse
DURATION Generally unlimited
INSIDE THE WAREHOUSE

Public or private — understand who operates the warehouse.

A customs warehouse is not defined only by the building in which goods are stored. The authorisation, the person using the procedure and the allocation of customs responsibilities are part of the operating model.

WAREHOUSE ARCHITECTURE TWO OPERATING MODELS
AUTHORISED + SUPERVISED
CONTROL LAYER CUSTOMS AUTHORITY Authorisation · supervision · controls
01
WAREHOUSE MODEL

Public customs warehouse

ACCESS MODEL

Available for customs warehousing of goods by any person, subject to the warehouse authorisation and the applicable customs requirements.

A USER
B USER
C USER
PUBLIC CUSTOMS WAREHOUSE
MULTIPLE USERS

The warehouse operator and the person placing goods under the procedure may therefore be different persons.

VS
02
WAREHOUSE MODEL

Private customs warehouse

ACCESS MODEL

Used for the storage of goods by the holder of the customs warehousing authorisation. The holder does not necessarily have to own the goods.

AUTHORISATION HOLDER WAREHOUSE OPERATOR
PRIVATE CUSTOMS WAREHOUSE
AUTHORISED USER

“Private” describes who may use the warehouse procedure — it does not mean that the stored goods must be owned by the authorisation holder.

RESPONSIBILITY MAP

Two roles can sit inside the same customs operation.

The holder of the authorisation and the holder of the procedure are distinct customs roles. Depending on the warehouse model and the terms of the authorisation, responsibilities must be understood before goods are placed under the procedure.

A
ROLE Holder of the authorisation

The person authorised to operate the customs warehousing facility.

FACILITY / AUTHORISATION
B
ROLE Holder of the procedure

The person responsible for the obligations arising from placing the goods under the customs warehousing procedure.

GOODS / PROCEDURE
ARTICLE 242 · CONTROL RESPONSIBILITIES
01 Keep goods under customs supervision

Goods under customs warehousing must not be removed from customs supervision.

02 Fulfil storage obligations

The obligations arising from storage under the customs warehousing procedure must be respected.

03 Respect placement obligations

The holder of the procedure remains responsible for obligations arising from placing the goods under customs warehousing.

PUBLIC WAREHOUSE RESPONSIBILITY CAN BE ALLOCATED DIFFERENTLY

For a public customs warehouse, the authorisation may provide that certain responsibilities for customs supervision and storage obligations fall exclusively on the holder of the procedure.

OPERATIONAL PRINCIPLE

Do not confuse the warehouse, the operator and the goods owner. Identify who holds the authorisation, who holds the procedure and which responsibilities the authorisation assigns before the goods enter the warehouse.

GOODS UNDER CONTROL

The warehouse must always know what is inside.

Customs warehousing depends on traceability. Goods, movements, customs status and relevant operations must remain identifiable while the procedure is active.

WAREHOUSE INVENTORY MONITOR LIVE PROCEDURE CONTROL
STOCK SYNCHRONISED
STORAGE MAP CURRENT STOCK
A-01
8471
NON-UNION 24 UNITS
A-02
8504
NON-UNION 12 UNITS
B-01
3926
NON-UNION 40 UNITS
B-02
7318
MOVEMENT 18 UNITS
GOODS MOVEMENT
RECORD UPDATE
CONTROL DATA PROCEDURE RECORD
GOODS ID CW-2026-00482
CUSTOMS STATUS NON-UNION
LOCATION ZONE B · SLOT 02
QUANTITY 18 UNITS
PROCEDURE WAREHOUSING
MOVEMENT RECORDED
CURRENT STOCK 94 UNITS
ACTIVE LOCATIONS 04
OPEN MOVEMENTS 01
CUSTOMS CONTROL ACTIVE
TRACEABILITY

The records should follow the goods.

Customs records must provide the information needed to supervise the procedure. In practice, the current stock and relevant movements must remain visible and reconcilable throughout the warehousing operation.

01 ENTRY Goods placed under procedure
02 IDENTIFY Goods and status recorded
03 LOCATE Stock remains traceable
04 UPDATE Movements reflected in records
05 EXIT Procedure correctly discharged
WHILE GOODS ARE STORED

Storage does not mean the goods can never move.

Some operations are possible while goods remain connected to the warehouse environment, but the customs treatment of each operation must be clear.

STORE
Remain in the warehouse

Goods can remain under customs warehousing while the next customs destination is being determined.

WAREHOUSING
MOVE
Temporary removal

Goods may be removed temporarily from the customs warehouse. Except in force majeure, prior customs authorisation is required.

AUTHORISE
HANDLE
Usual forms of handling

Where the applicable conditions are met, goods under a special procedure may undergo usual forms of handling intended to preserve them, improve their appearance or marketable quality, or prepare them for distribution or resale.

CONDITIONS APPLY
PROCESS
Processing inside the warehouse

Customs may authorise inward-processing or end-use operations to take place in a customs warehouse. The goods concerned are then treated under that procedure, not as goods under customs warehousing.

OTHER PROCEDURE
PROCEDURE DISTINCTION SAME LOCATION ≠ SAME CUSTOMS PROCEDURE
GOODS Stored in customs warehouse
WAREHOUSING Customs warehousing procedure
PROCESSING AUTHORISED?
PROCESSING Inward processing / end-use

The physical location alone does not determine the customs procedure. Customs treatment follows the procedure under which the goods are actually placed.

CONTROL PRINCIPLE

Know the stock, know the location, know the procedure. Customs warehousing depends on records that allow the goods and their movements to remain under effective customs supervision from placement to discharge.

WHY USE CUSTOMS WAREHOUSING?

Separate physical arrival from the final customs decision.

Customs warehousing can give a business time and flexibility between the arrival of non-Union goods and their next customs destination. The commercial value is often in controlling when and how goods move to the next procedure.

THE DECISION WINDOW Goods have arrived.
The final route does not have to be immediate.

Instead of automatically moving all goods into free circulation, eligible goods can remain under customs warehousing while the business determines what should happen next.

ARRIVAL
NON-UNION GOODS 100 UNITS
CUSTOMS WAREHOUSING
DECISION WINDOW OPEN
STATUS STORED UNDER PROCEDURE
PHYSICAL IN EU
CUSTOMS STATUS NON-UNION
NEXT ROUTE OPEN
SELL / USE IN EU FREE CIRCULATION
PROCESS OTHER PROCEDURE
MOVE TRANSIT
LEAVE EU RE-EXPORT
ECONOMIC LOGIC

The advantage is timing — not automatic duty elimination.

Warehousing can postpone the customs treatment associated with release for free circulation while goods remain correctly under the storage procedure. What ultimately becomes payable depends on the route later chosen and the rules applicable to that route.

CUSTOMS TIMING MODEL ARRIVAL ≠ IMMEDIATE FREE CIRCULATION
TREATMENT DEFERRED
01
GOODS ARRIVE EU customs territory
02
STORE Customs warehousing
03
DECIDE Next customs route
04
APPLY Relevant customs treatment
WAREHOUSE PERIOD TIME BETWEEN ARRIVAL AND NEXT PROCEDURE

The financial effect depends on the goods, the eventual customs route and the applicable duties, taxes and other measures.

PRACTICAL SCENARIOS

Where the flexibility becomes useful.

The same warehouse can support different commercial outcomes. The relevant question is not simply where the goods are stored, but what will eventually happen to them.

01
STOCK BEFORE SALE Import stock before the final EU customer is known.

Goods can remain under customs warehousing while commercial allocation is still being determined, before the relevant quantities move to their next customs treatment.

WAREHOUSE → EU DESTINATION
02
PARTIAL RELEASE Move only the required quantities onward.

Commercial stock can be managed in stages, with quantities leaving the warehouse as required and receiving the customs treatment appropriate to their destination.

100 UNITS → 20 + 30 + 50
03
RE-EXPORT Goods may leave the EU without entering free circulation.

If the commercial destination changes, goods stored under the procedure can be routed out of the Union instead of first being released for free circulation.

WAREHOUSE → RE-EXPORT
04
NEXT PROCEDURE Goods can move into another customs procedure.

Warehousing can form one stage of a wider customs chain, followed for example by transit, inward processing or release for free circulation when the applicable conditions are met.

STORAGE → NEXT PROCEDURE
STOCK RELEASE MODEL One arrival.
Several possible exits.

Warehousing can support staged stock movements rather than forcing the entire commercial quantity into the same next customs route at the same moment.

WAREHOUSE STOCK 100 UNITS
20
BATCH A FREE CIRCULATION
30
BATCH B RE-EXPORT
50
REMAINING WAREHOUSE STOCK
DO NOT READ “SUSPENSION” AS “EXEMPTION”

Customs warehousing can defer the application of import treatment while the goods remain under the procedure. It does not by itself create a permanent exemption from customs obligations. The final treatment follows the customs destination ultimately chosen.

COMMERCIAL PRINCIPLE

Use the warehouse as a controlled decision point. Its value is the ability to hold non-Union goods under customs supervision while stock, destination and the next customs route are managed in a controlled way.

BEFORE THE GOODS ENTER

Make the warehouse ready before the procedure starts.

Customs warehousing is an authorised control environment. The facility, guarantee, records, responsibilities and movement of the goods need to work together before stock is placed under the procedure.

WAREHOUSE READINESS CONTROL BOARD PRE-OPERATION CHECK
CONTROL SEQUENCE ACTIVE
01
AUTHORISATION Warehouse operation authorised

The customs authorities must authorise the operation of the storage facility and define the conditions under which it may operate.

REQUIRED
02
GUARANTEE Potential customs debt covered

The guarantee arrangements connected with the warehouse authorisation must be established where customs debt or other charges may arise.

CHECK
03
FACILITY Approved storage environment

The authorised premises and operating conditions must allow customs supervision to be exercised effectively.

CONTROLLED
04
RECORDS Stock and movements traceable

Approved records must allow customs to identify the goods, their customs status and their movements while the procedure is active.

TRACEABLE
05
GOODS Goods compatible with the authorisation

Confirm that the goods and any special storage requirements are compatible with the warehouse authorisation and the facility in which they will be stored.

VERIFY
06
ROLES Responsibilities allocated

Identify the holder of the authorisation, the holder of the procedure and the responsibilities attached to each role.

DEFINE
07
DISCHARGE The exit route is controlled

The procedure must remain traceable through to its correct discharge when the goods move to their next customs treatment or otherwise leave the procedure.

PLAN
CONTROL LOGIC WAREHOUSE STATUS
7 CHECKS
READINESS MODEL CONTROL BEFORE STORAGE

Each control point supports the ability to keep the goods identifiable and under customs supervision.

AUTH Authorisation
GUA Guarantee
LOC Facility
REC Records
GDS Goods
ROL Roles
END Discharge

A warehouse is ready when the physical stock and the customs control model describe the same operation.

THREE CONTROL LAYERS

The warehouse exists in three places at once.

Effective customs warehousing links the legal authorisation, the physical goods and the customs records. If those three layers stop matching, the operation becomes difficult to supervise and control.

01
LEGAL LAYER AUTHORISATION

Who may operate, where and under which conditions.

RULES
02
PHYSICAL LAYER GOODS + LOCATION

What is actually stored and where it is located.

STOCK
03
DATA LAYER RECORDS

What customs can use to identify and supervise the goods.

DATA
GOODS CHECK NOT EVERY STOCK PROFILE IS IDENTICAL

The warehouse authorisation and the characteristics of the goods determine how the storage environment must be organised.

01 Identify the goods

The records must allow the goods under the procedure to be identified.

02 Know their customs status

Customs supervision depends on maintaining the correct status information.

03 Check special storage needs

Certain goods may require specially equipped facilities because of their nature or the risks associated with storage.

04 Control mixed stock

Where Union and non-Union goods are stored together, the applicable identification or accounting-segregation rules must be respected.

CONTROL BREAKS

Where a warehouse operation can lose coherence.

AUTH Operation outside authorised conditions

The physical or procedural operation no longer matches the conditions under which the warehouse was authorised.

STOCK Goods cannot be reconciled

Physical quantities, locations or movements do not correspond with the customs records.

MOVE Movement is not correctly reflected

Goods change location or treatment without the required customs control being maintained.

END Procedure is not properly discharged

The goods leave warehousing without the next customs treatment being correctly completed and reflected in the records.

PRE-STORAGE GATE
AUTHORISATION VALID
GUARANTEE ARRANGED
RECORDS READY
GOODS VERIFIED
ROLES DEFINED
CONTROL STATE READY TO PLACE GOODS
READINESS PRINCIPLE

Control starts before storage. The warehouse should already know who is responsible, where the goods will be held, how they will be recorded and how the procedure will be supervised before the first goods are placed under customs warehousing.

CUSTOMS WAREHOUSING FAQ

Common questions about customs warehousing.

Customs warehousing is a storage procedure for non-Union goods under customs supervision. These answers clarify the main operational distinctions before using the procedure.

01 What is customs warehousing?

Customs warehousing is a special procedure under which non-Union goods can be stored in premises or other locations authorised by the customs authorities and under customs supervision.

02 Are customs warehouse goods already in free circulation?

No. Physical presence in the EU does not mean that non-Union goods have been released for free circulation. While correctly placed under customs warehousing, they remain under the storage procedure until they receive their next customs treatment.

03 How long can goods remain in a customs warehouse?

As a general rule, there is no fixed maximum period for goods to remain under customs warehousing. Customs authorities may impose a time limit in specific circumstances, particularly where the nature of the goods could create a risk during long-term storage.

04 Are import duties paid when goods enter the warehouse?

Goods correctly held under the customs warehousing procedure are not subject to the import treatment that would arise from release for free circulation merely because they have entered the warehouse. The eventual customs treatment depends on what happens to the goods next.

05 Can goods leave the warehouse without entering free circulation?

Yes. Depending on the operation and applicable conditions, goods may be placed under another customs procedure or leave the customs territory without first being released for free circulation.

06 Can goods be temporarily removed from the warehouse?

Yes. Goods under customs warehousing may be temporarily removed from the customs warehouse. Except in cases of force majeure, prior authorisation from the customs authorities is required.

07 Can processing take place inside a customs warehouse?

Customs authorities may allow inward-processing or end-use operations to take place in a customs warehouse where the relevant conditions are met. The goods concerned are then treated under that procedure rather than as goods under customs warehousing.

08 What is the difference between a public and private customs warehouse?

A public customs warehouse is available for the customs warehousing of goods by any person. A private customs warehouse is used for the storage of goods by the holder of the authorisation for customs warehousing.

CUSTOMS WAREHOUSING Store under control.
Keep the goods traceable.
Choose the next customs route.

Customs warehousing creates a controlled space between arrival and the next customs treatment — but that flexibility depends on authorisation, supervision, records and correct discharge.