EUDR Products.
Which goods fall under the EU Deforestation Regulation?
The EUDR covers specified commodities and relevant products listed in Annex I. Understanding its scope requires more than identifying the raw material: product descriptions, Combined Nomenclature codes and the applicable legal provisions must be considered together.
Explore the seven covered commodities, their derived products and the classification questions that determine whether a particular item falls within the regulation.
Illustrative scope-assessment model. Classification must be checked against the applicable Annex I descriptions and legal provisions.
Seven commodities. A defined list of relevant products.
The EU Deforestation Regulation identifies seven commodities linked to deforestation risks. Its product scope, however, is not unlimited: the relevant products are those specified in Annex I of the regulation.
Understanding this distinction is essential for importers, exporters, manufacturers and other supply-chain participants assessing whether particular goods fall within the EUDR.
A covered commodity does not mean every product containing it is covered.
Annex I specifies relevant products through commodity categories, product descriptions and customs classification references. A product must be assessed against the applicable legal wording rather than classified as EUDR-relevant solely because it contains cocoa, rubber, wood or another covered commodity.
From agricultural production to internationally traded goods.
The examples below illustrate product categories appearing in Annex I. They are not exhaustive lists, and precise coverage depends on the applicable CN classification and legal product description.
Cattle
The cattle category includes specified live animals and selected products derived from cattle, as identified in Annex I.
Not all animal products or leather goods are automatically included. Check the precise Annex I entries.
Cocoa
Cocoa is covered together with a defined range of cocoa-based products and preparations appearing in Annex I.
Cocoa content alone is not sufficient to determine the EUDR status of every finished food product.
Coffee
The coffee category covers specified coffee products identified through the relevant Annex I entry.
Coffee extracts, preparations and beverages require separate classification analysis rather than automatic inclusion.
Oil palm
The oil palm category includes selected palm-derived oils, fractions and other products expressly identified in Annex I.
Products containing palm oil are not all automatically covered. Relevant chemical descriptions and CN codes require careful review.
Rubber
Natural rubber and specified rubber articles are included in the product categories listed in Annex I.
Natural and synthetic rubber must be distinguished. The presence of rubber in a product does not alone determine its scope.
Soya
The soya category covers soybeans and certain processing products specifically listed in Annex I.
Soy-based ingredients and finished foods should not be assumed to fall within Annex I without checking their classification.
Wood
The wood category covers a wide range of specified wood, paper and manufactured products, subject to the descriptions and exclusions established in Annex I.
Wood-related product scope is particularly broad, but not unlimited. Recycled-material rules, exclusions and precise CN entries must be assessed.
Material composition is not the entire legal test.
Two products may contain the same covered commodity while falling under different customs headings and different EUDR outcomes.
Chocolate
Chocolate falling within the relevant Annex I product entry is covered, subject to the applicable provisions.
A different food preparation
A product containing cocoa but classified outside the relevant Annex I entries is not brought into scope merely because cocoa is present.
The examples illustrate the importance of customs classification. Product composition, processing characteristics, the applicable CN rules and the exact wording of Annex I must be considered before reaching a scope conclusion.
The seven commodities are only the starting point.
The next section examines how Annex I uses CN codes, product descriptions and selected scope limitations to define the goods covered by the regulation.
The product code matters. The legal description matters more.
Annex I of Regulation (EU) 2023/1115 defines the relevant products covered by the EUDR using customs nomenclature references and product descriptions.
For businesses handling international trade, identifying the correct Combined Nomenclature classification is a critical starting point. But a reliable scope assessment must also consider the exact wording of the relevant Annex I entry, including any limitations, qualifications or exclusions.
Do not classify the regulation from the material alone.
EUDR product scope is based on the specific relevant products identified in Annex I. A covered commodity may appear in many different finished goods, but only products falling within the applicable Annex I entries are relevant products for the regulation.
Conversely, an Annex I entry may cover a product even when its connection to the underlying commodity is not immediately obvious from its commercial description.
Three elements. One defensible classification.
The product list should be read as a legal classification instrument, not merely as a catalogue of materials or commercial products.
Customs code
Identify the correct classification of the product under the Combined Nomenclature, applying the relevant classification rules.
Product description
Compare the goods with the actual wording of the Annex I entry, rather than relying solely on a commercial name or supplier description.
Qualifications & exclusions
Check whether the entry uses the prefix ex, contains a narrower description or is subject to specific exclusions or interpretative provisions.
What does “ex” mean?
The prefix ex is particularly important when reading customs-based regulatory lists. It indicates that the reference concerns only part of the goods classified under the indicated code or heading.
The diagram is conceptual. The relative widths do not represent actual product volumes or a specific CN heading.
The code is not enough
An ex entry does not automatically include every product classified under the referenced code.
Read the narrower description
The legal text identifies the relevant subset of goods. The product must correspond to that description.
Document the conclusion
Retain the classification rationale and the specific Annex I wording used to support the assessment.
When Annex I uses ex, never conclude that all products falling under that customs heading are EUDR-relevant without checking the accompanying description.
From the customs heading to the regulatory outcome.
These selected examples demonstrate how Annex I references can be approached in practice. They are not a complete reproduction of Annex I.
| Commodity | CN / HS reference | Product category | Assessment focus |
|---|---|---|---|
| Coffee | 0901 |
Coffee, whether or not roasted or decaffeinated, and other goods described by the relevant heading. | Confirm classification and correspondence with the Annex I entry. |
| Cocoa | 1806 |
Chocolate and other food preparations containing cocoa. | Distinguish heading 1806 from other food-preparation headings. |
| Soya | 1201 |
Soya beans, whether or not broken. | Confirm the goods are classified under the relevant heading. |
| Oil palm | 1511 |
Palm oil and its fractions, whether or not refined, but not chemically modified. | Distinguish the listed oil category from differently classified preparations. |
| Wood | 4403 |
Wood in the rough, whether or not stripped of bark or sapwood, or roughly squared. | Confirm the wood product classification and review applicable Annex I provisions. |
The four-digit references shown are heading-level examples. A customs declaration may require a more detailed CN or TARIC code. Product scope must always be assessed against the applicable legal text and correct customs classification.
A repeatable method for assessing product scope.
The following workflow is an operational recommendation, not an official mandatory EUDR assessment procedure.
Establish the actual product, composition, processing characteristics and intended use where relevant to classification.
Apply the customs classification rules using reliable product information and the applicable nomenclature.
Compare the code and product description with the relevant Annex I entry, including any ex qualification.
Consider exclusions, product characteristics, operator roles and other relevant legal rules.
Preserve the classification, Annex I reference, evidence and rationale supporting the scope assessment.
A documented product-scope assessment — not an assumption.
Where the evidence is incomplete or the classification remains uncertain, resolve the issue before treating the product as definitively included or excluded.
Product scope and operator obligations are related — but not identical.
Identifying a relevant product under Annex I is only one part of an EUDR assessment. Whether a particular business must perform due diligence, submit a declaration or comply with another requirement depends on the applicable provisions, its role in the supply chain and the relevant legal regime.
Similar materials. Different classifications. Different outcomes.
Continue with practical examples of products that may be included or excluded, and the reasons why their customs classification matters.
Similar materials. Different regulatory outcomes.
Two goods can contain the same commodity and still have different EUDR classifications. The decisive questions are what the product actually is, how it is classified and whether it matches an Annex I entry.
Explore representative examples of products included in the regulation, products outside the listed categories and situations where additional technical or legal checks are necessary.
Within Annex I
The product matches a listed classification and description, subject to the applicable provisions.
IN SCOPEOutside Annex I
The correctly classified product does not fall within the relevant entries or meets an applicable exclusion.
OUT OF SCOPEFurther review needed
Classification, material origin, product function or the precise legal description remains uncertain.
VERIFY FIRSTSix practical scenarios. Six different checks.
The examples assume the product characteristics described in each scenario. They illustrate product scope, not a final determination of an individual company’s obligations.
Chocolate products
Chocolate and other food preparations containing cocoa classified under heading 1806 are expressly listed in the cocoa section of Annex I.
A cocoa-containing preparation
Consider a finished food preparation containing cocoa that is correctly classified outside every relevant Annex I entry. Cocoa content alone does not bring that product into scope.
Natural or synthetic rubber tyres?
Annex I includes an ex entry for new pneumatic tyres under heading 4011. The product’s material composition and the restricted scope of the entry require careful examination.
Plywood panels
Plywood, veneered panels and similar laminated wood products falling under heading 4412 are listed in the wood section of Annex I.
A wooden pallet carrying goods
A wooden pallet used exclusively to support, protect or carry another product is treated differently from a pallet marketed as a product in its own right.
Recycled paper products
Annex I provides an exclusion for qualifying goods produced entirely from material that has completed its lifecycle and would otherwise have been discarded as waste.
The same wooden pallet. Two different situations.
Packaging is one of the most practically important EUDR scope questions for customs and logistics operations. The function of the packaging, its presentation and the applicable classification rules must be considered.
Used to carry other goods
A pallet presented and used exclusively as packaging to support, protect or carry another product.
Sold as a product in its own right
Newly manufactured wooden pallets supplied independently as merchandise rather than used to carry another product.
This comparison concerns the product-scope distinction. Reusable packaging, packaging subsequently traded after use, independently classified containers and other specific situations require the applicable EU guidance and customs classification rules to be read together. An empty pallet is not automatically in scope merely because it is empty.
A complex product requires a structured review.
When products contain several materials or undergo substantial processing, commercial descriptions can obscure their correct customs classification.
Identify the finished article
Record its actual characteristics, function, constituent materials and degree of processing.
Classify the product correctly
Apply the General Rules for the Interpretation of the Combined Nomenclature.
Compare with Annex I
Check the resulting classification, the relevant product description and any ex limitation.
Record the scope decision
Retain the evidence supporting inclusion, exclusion or escalation for further review.
Never decide EUDR scope from the product name alone.
The correct approach combines product identification, customs classification, Annex I wording and applicable exclusions. Where the facts remain uncertain, the conclusion should remain open until the missing information is resolved.
From product classification to operational control.
An EUDR product-scope assessment becomes operationally useful when it is connected to the company’s product master data, purchasing records, supply-chain roles and customs procedures.
The objective is not to classify the same product repeatedly. It is to establish a documented, maintainable process that identifies relevant products, distinguishes applicable obligations and detects missing information before a transaction proceeds.
One product. Three separate decisions.
A reliable workflow separates the legal scope of the goods from the company’s position in the supply chain and from the customs data required for a particular movement.
An Annex I product does not automatically mean that every company handling it must submit a due diligence statement.
Start with the product master record.
The following fields form a recommended internal control structure. They are not presented as a mandatory EUDR database format. Some information may instead be held in linked compliance, purchasing or shipment records.
Product scope register
| Item ID | Product | CN heading | Scope review | Next action |
|---|---|---|---|---|
PRD-001 |
Roasted coffee Commercial merchandise | 0901 |
Annex I match | Determine role and applicable controls |
PRD-002 |
Plywood panel Wood-based article | 4412 |
Annex I match | Verify product and supply-chain facts |
PRD-003 |
Composite article Mixed-material product | Pending |
Classification open | Request technical specification |
PRD-004 |
Wooden transport pallet Supporting another product | Review |
Use-dependent | Document packaging function |
Store the classification rationale, applicable Annex I version, review date and responsible person alongside the scope result. Keep transaction-specific evidence and reference numbers linked to the relevant goods or movements.
What should a useful product record contain?
Product identity
SKU, technical description, composition and product characteristics.
Customs classification
Applicable CN code, supporting reasoning and any relevant BTI.
Annex I assessment
Relevant entry, ex qualification, exclusions and scope conclusion.
Legal role
The company’s role for the specific supply-chain transaction.
Compliance linkage
References to relevant statements, declarations or supplier information where legally applicable.
Review history
Last assessment, supporting evidence, reviewer and change triggers.
Not every company performs the same checks.
The EUDR framework amended in 2025 differentiates upstream operators, micro or small primary operators, downstream operators and traders. The precise legal definition and facts of each transaction determine the applicable duties.
Upstream operator
A business first placing a relevant product on the EU market, or exporting a relevant product not already covered by upstream due diligence.
Applicable due diligence and submission of a due diligence statement before the relevant act.
Micro or small primary operator
A qualifying primary producer benefiting from the specific simplified regime under Article 4a.
Assess eligibility and the applicable one-time simplified declaration arrangements.
Downstream operator or trader
A business handling relevant products within the definitions established by the amended regulation.
Collect and retain the information required by Article 5, with registration and additional requirements where applicable.
Downstream operators and traders are not generally required to conduct their own due diligence or submit new due diligence statements. However, Article 5 contains traceability, information-retention, registration and substantiated-concern provisions that must not be overlooked. Do not infer the role from company size or the word “exporter” alone.
Five checks before customs processing.
A practical internal workflow can prevent incomplete product information from reaching the declaration stage. The steps below are recommendations for operational control, not a separate procedure imposed by the EUDR.
Confirm the goods and CN classification
Match the commercial invoice and product description against the approved master record. Escalate any change in material, function or product specification.
Check the applicable Annex I entry
Confirm whether the goods match the current legal product description. Review relevant ex entries, exclusions, transitional provisions and changes to the Annex.
Determine the responsible legal actor
Identify whether the transaction involves an upstream operator, a qualifying micro or small primary operator, a downstream operator or a trader. Apply the corresponding provisions.
Confirm applicable evidence and identifiers
Where required, confirm the relevant due diligence statement reference, simplified declaration identifier or other legally applicable information. Do not require the same documentation from every type of business.
Prepare the declaration using current rules
Verify the customs procedure, applicable TARIC measures, document codes, references and any legally supported exclusion or transitional code.
When the information does not match.
Operational controls are useful only if the company has a defined response to missing or contradictory information.
Uncertain CN code
Technical characteristics are incomplete or the product may fall under more than one heading.
Unclear product scope
An ex entry, an exclusion or a product-specific qualification requires further interpretation.
Missing required information
A legally necessary statement, declaration identifier or supporting record is unavailable.
Product specification changed
A supplier changes the composition, production process or characteristics of a previously reviewed item.
Compliance requires clear ownership.
Even when a company uses a customs representative, external consultant or software provider, the allocation of regulatory responsibilities must follow the applicable legal provisions.
The following is an example of internal process ownership, not a statutory organisational model.
Make the scope decision once. Keep it accurate over time.
A controlled product register, a documented legal-role assessment and a transaction-level verification process reduce avoidable errors and make future audits easier.
EUDR product scope. Questions, answers & legal sources.
Understanding which goods fall under the EU Deforestation Regulation requires more than identifying a commodity. The final assessment combines the applicable Annex I, correct product classification and the legal rules governing the transaction.
These frequently asked questions address common issues faced by customs teams, importers, exporters, manufacturers and supply-chain compliance professionals.
Ten questions. Clearer product decisions.
Select a question to expand the answer. Each response focuses on product scope and identifies when further assessment is necessary.
01 Which products are covered by the EUDR?
The EUDR covers relevant commodities and relevant products listed in Annex I to Regulation (EU) 2023/1115, as amended. The seven commodity groups are cattle, cocoa, coffee, oil palm, rubber, soya and wood.
Not every product containing one of these commodities is automatically covered. The relevant Annex I entry, product description and applicable classification must be checked.
02 Does the presence of wood, cocoa or rubber automatically trigger EUDR?
No. The presence of a relevant commodity is not sufficient by itself to establish that the finished product is covered.
The product must be assessed against the relevant Annex I entries. The classification and description of the finished product are essential, particularly for composite goods and products containing several materials.
03 Why is the CN code important?
Annex I identifies relevant products through customs nomenclature references and product descriptions. Correct classification is therefore a central part of the scope assessment.
A CN code alone should not be used without examining the full Annex I wording, especially where an entry uses the prefix “ex” or contains a specific limitation.
04 What does “ex” mean before a customs code in Annex I?
The prefix “ex” indicates that the Annex I entry covers only the specified part of the relevant customs heading or subheading.
The full product description must therefore be read before deciding whether an individual article falls within the EUDR.
05 Are wooden pallets and packaging covered?
The assessment depends on the applicable Annex I wording and the function in which the packaging is presented.
Wooden packaging material used exclusively to support, protect or carry another product is treated differently from wooden packaging marketed independently as merchandise.
The fact that a pallet is empty does not, by itself, determine whether it falls within scope. Reusable packaging and other special situations require separate examination.
06 Are products made from recycled materials excluded?
Annex I contains an exclusion for qualifying goods produced entirely from material that has completed its lifecycle and would otherwise have been discarded as waste.
The exclusion must be assessed against the precise legal wording. A product containing a mixture of recovered and virgin material should not automatically be treated as wholly excluded.
07 How should mixed-material products be assessed?
Start with the characteristics and function of the finished article. Determine its correct customs classification using the applicable classification rules.
Then compare the result with Annex I, including any restricted descriptions and exclusions. The mere presence of an EUDR commodity in one component does not automatically establish that the entire finished product is covered.
08 Does every business handling an Annex I product need a DDS?
No. The obligations depend on the company’s legal role and the applicable provisions of the amended EUDR.
Upstream operators generally have due diligence and statement obligations. Qualifying micro or small primary operators benefit from the simplified regime in Article 4a. Downstream operators and traders are subject to the differentiated information and traceability requirements in Article 5.
09 Does a product listed in Annex I always require a customs DDS reference?
No automatic conclusion should be drawn from Annex I inclusion alone. Customs requirements depend on the applicable legal provisions, the relevant movement, the business’s role and the measures in force.
A due diligence statement reference and a simplified declaration identifier are different instruments. Their use must follow the relevant legal rules and current customs implementation requirements.
10 Can the EUDR product list change?
Yes. Annex I can be amended through the relevant EU legal procedures. Product-scope decisions should therefore be checked against the version applicable to the transaction date.
Regulation (EU) 2026/2102 introduced changes to Annex I. Companies should review its provisions, entry into force and application arrangements before relying on older classification matrices.
The legal sources behind the product assessment.
Product-scope decisions should be traceable to official legal texts. The following references distinguish the original regulation, subsequent amendments and explanatory guidance.
EU Deforestation Regulation
Establishes the EUDR framework, relevant commodities and products, market conditions and principal compliance provisions.
Updated EUDR responsibilities
Introduces differentiated downstream obligations, the micro or small primary operator regime and revised application arrangements.
Annex I product-scope update
Amends the list of relevant products, including targeted technical adjustments and changes to product coverage.
European Commission guidance
Provides interpretative explanations on implementation, product coverage, practical scenarios and regulatory concepts.
Binding EU regulations and their applicable amendments determine legal obligations. Commission guidance supports interpretation but does not replace the legal text. Always verify the version applicable to the relevant transaction.
A quick legal reading map.
Relevant commodities, relevant products, operators and traders.
Conditions for placing, making available or exporting relevant products.
Due diligence, simplified arrangements and downstream information duties.
Relevant product descriptions, customs nomenclature entries and specific exclusions.
Identify the product. Apply the right rule.
Reliable EUDR compliance begins with a defensible product-scope decision. Classification, legal interpretation and supply-chain responsibilities must work together.
Return to EUDR Explained