Transit Forms.
The documents, references and electronic controls behind the movement of goods under customs transit.
Explore Union and common transit documentation, including T1, T2, T2F, Transit Accompanying Documents, NCTS references, customs guarantees and the evidence required to establish correct completion of a transit movement.
EXPLORE THE FRAMEWORKT1, T2 and applicable transit data.
MRN, TAD and movement references.
Guarantees, GRN and authorisations.
Arrival, ending and customs discharge.
Three transit codes. Different customs implications.
T1, T2 and T2F identify different transit treatments. Selecting the correct code requires an understanding of customs status, the route, the territories involved and the legal conditions for the movement.
What is the customs status of the goods?
Customs status is central to the selection of a transit procedure. Union goods and non-Union goods are treated differently under the Union Customs Code.
However, status alone does not determine every transit requirement. The route, special fiscal territories, relevant agreements and the conditions of the movement must also be considered.
External transit is commonly relevant.
T1Internal transit may be relevant in specified circumstances.
T2 / T2FT1, T2 and T2F. What each code means.
These identifiers must be interpreted in the context of Union transit or common transit, as applicable. They are not interchangeable labels for the same documentary operation.
External transit
Generally used for non-Union goods moving under customs supervision without immediate payment of import duties, subject to the applicable transit rules.
Internal transit
Used for Union goods in circumstances covered by internal transit rules, including relevant movements through territories outside the EU customs territory under the applicable arrangements.
Internal transit — fiscal territories
Used in specified movements of Union goods involving parts of the EU customs territory where the relevant EU VAT or excise rules do not apply, under the conditions prescribed for the procedure.
| Criterion | T1 | T2 | T2F |
|---|---|---|---|
| Transit type | External | Internal | Internal — special fiscal context |
| Typical goods | Non-Union | Union | Union |
| Principal distinction | Movement of goods under external transit | Internal transit treatment | Movement involving specified fiscal territories |
| Electronic declaration | Normally NCTS | Normally NCTS | Normally NCTS |
| MRN | Assigned in the electronic process | Assigned in the electronic process | Assigned in the electronic process |
| Guarantee | Generally required, subject to exceptions | Depends on applicable rules and circumstances | Depends on applicable rules and circumstances |
Beyond the transit code. The data that defines the movement.
Transit declarations contain structured information. Data requirements are determined by the applicable customs data model, legislation and NCTS implementation.
Declaration type, transit framework and relevant movement references.
Holder of the procedure, relevant operators, office of departure and office of destination.
Goods descriptions, commodity data where required, packages, masses and goods-item information.
Transport identification, relevant route information and customs offices of transit where applicable.
Guarantee information, relevant document references and other required particulars.
Where legally required, the relevant particulars or links to separate filings.
Three movements. Three questions to resolve.
These examples illustrate the logic of procedure selection. They are not automatic legal conclusions for every possible route or transport arrangement.
Non-Union goods arriving at an EU port
Goods are unloaded at a port and need to move to an inland customs office before the next customs procedure is completed.
Union goods moving through a common transit country
Union goods travel between relevant locations along a route involving a country participating in the common transit system.
Union goods involving a special fiscal territory
A movement involves a territory within the EU customs territory but outside the relevant harmonised fiscal territory.
Validate the movement before submitting the declaration.
An incorrect transit type can create procedural problems even where the goods, route and commercial documentation are otherwise clear.
Union Customs Code, Articles 226–236, together with the applicable delegated and implementing rules and, for common transit, the Convention on a Common Transit Procedure.
One movement. Multiple documentary records.
The New Computerised Transit System (NCTS) connects declaration data, customs decisions, movement identification and arrival controls. The accompanying documentation supports the physical movement, while the electronic record determines its procedural status.
The declaration lives in the customs system.
A transit movement is not created merely by printing a document. The declaration must be processed and released according to the applicable customs procedure.
The TAD. A movement reference on the road.
The Transit Accompanying Document presents information relevant to a transit movement. Its use, format and availability are governed by the applicable transit rules and electronic-system arrangements.
Transit Accompanying Document
Simplified visual representationIt identifies the movement. It does not create the procedure.
The accompanying document provides customs and transport operators with relevant information for identifying the transit movement and supporting controls.
The MRN links the accompanying information to the relevant electronic transit record.
Departure and destination references help identify the intended customs route.
Relevant particulars support the identification of goods and the means of transport.
The prescribed document or permitted electronic information must be available as required during the movement.
The availability of a TAD, printout or MRN does not, by itself, establish that customs have released the goods for transit.
The MRN. One identifier, many events.
The MRN identifies the movement within the electronic customs environment. It is used to retrieve, communicate and associate information relating to the transit operation.
Assigned by the customs system and used throughout the movement lifecycle.
It is not the same as an invoice number, CMR reference or commercial shipment identifier.
The movement’s actual procedural status must be established from the relevant customs system information.
Access to detailed movement information depends on the available customs services, authorisations and system permissions.
NCTS. From departure to discharge.
NCTS exchanges electronic messages between economic operators and customs authorities and, where applicable, between customs offices. The sequence below illustrates the principal operational stages.
The holder or representative submits the required transit declaration data.
The office of departure processes the declaration and performs applicable checks.
Following the required checks and conditions, customs may release the goods for movement.
The goods travel under the applicable route, presentation and identification requirements.
The goods and required movement information are presented in accordance with the applicable rules.
Customs reconcile the relevant information and determine whether the procedure can be discharged.
Verify the movement. Not just the paperwork.
Transport documentation should be consistent with the transit declaration and the actual movement authorised by customs.
The Union Customs Code and its delegated and implementing acts establish the legal framework for Union transit. Common transit operations must also comply with the Convention on a Common Transit Procedure.
Securing the movement. Controlling the documentary risk.
A transit declaration is only one part of a compliant movement. Where required, a valid guarantee must cover the potential customs debt and other applicable charges. Supporting records must substantiate the declaration, while authorised simplifications determine how certain operations can be performed.
A transit guarantee. Security for a potential liability.
Under the applicable transit framework, a guarantee generally secures the potential customs debt and other charges that may become payable if the procedure is not correctly fulfilled.
The holder of the transit procedure remains responsible for fulfilling the obligations attached to that procedure. Providing a guarantee does not replace those obligations.
Reference used for an applicable guarantee arrangement, together with the required authentication or access information.
Different guarantees. Different operating models.
The appropriate form of guarantee depends on the legal framework, the operator’s authorisations, the movements involved and the applicable financial-security requirements.
Individual Guarantee
Security for a particular operation
An individual guarantee covers the relevant liability associated with a specific transit operation. The permitted forms and conditions are determined by the applicable transit rules.
Comprehensive Guarantee
Security for multiple operations
A comprehensive guarantee can cover multiple transit operations within the scope of the authorisation. Its use is subject to customs approval, a reference amount and applicable conditions.
Reduction, Waiver & Exceptions
Conditional relief from standard security
The legal framework provides for certain guarantee reductions, waivers and situations where a guarantee is not required. Eligibility is conditional and must not be assumed from the operator’s commercial profile.
The GRN. A reference, not a financial instrument.
The Guarantee Reference Number identifies an applicable guarantee within the relevant customs system. It enables the system to associate a declaration with the corresponding guarantee arrangement.
The GRN does not itself prove that sufficient guarantee capacity is available or that a particular declaration has been accepted and released.
Beyond the TAD. Evidence supporting the declaration.
Supporting documentation must be distinguished from the transit declaration and its accompanying document. The relevant documents depend on the goods, route, transport mode and legal requirements of the operation.
Commercial invoice
Commercial information may support the identification, description and valuation of goods. An invoice is not itself a transit declaration.
Packing list
Package counts, marks, weights and descriptions may support the reconciliation of the goods with the transit declaration.
Transport document
CMR consignment notes, bills of lading, air waybills or other transport records may identify the movement.
Licences & certificates
Certain goods may require licences, certificates or other regulatory documentation independently of the transit procedure.
Previous customs documents
Previous declarations, temporary-storage references or other customs records may be relevant to the movement and its traceability.
Guarantee & authorisation records
Guarantee details and applicable authorisations support verification of the operator’s eligibility and procedural arrangements.
Authorised operators. Different procedural responsibilities.
Certain customs authorisations allow economic operators to carry out transit formalities through simplified arrangements. The conditions and responsibilities differ according to the authorisation.
Authorised Consignor
An authorised consignor may be permitted to place goods under transit without presenting them at the office of departure, subject to the conditions of the authorisation and applicable controls.
Authorised Consignee
An authorised consignee may receive goods moving under transit at an authorised location without the standard presentation at the office of destination, subject to prescribed notifications and controls.
Simplified procedures still require compliance with the transit rules.
An authorised consignor must not dispatch goods before the applicable release conditions are fulfilled. An authorised consignee must comply with the prescribed arrival, notification and unloading arrangements. Neither status automatically removes the need for an applicable transit guarantee.
Not every movement. Not every document.
Transit legislation provides for additional simplifications and special arrangements. Their availability depends on the legal framework, transport mode and authorisation conditions.
Authorised use of seals of a special type, subject to the prescribed technical and procedural requirements.
Certain transport modes may benefit from specific transit simplifications where the relevant legal conditions are met.
Where authorised contingency arrangements apply, transit may be managed through prescribed fallback procedures rather than normal electronic processing.
Five controls. Before the movement begins.
Financial security, declaration data and operator authorisations must be consistent with the actual movement.
Union Customs Code: guarantees are governed principally by Articles 89–100, while transit procedures and simplifications are addressed in Articles 226–236, supplemented by the delegated and implementing acts. Common transit operations are also governed by the Common Transit Convention.
Arrival is not discharge. Evidence closes the movement.
The physical arrival of goods at destination does not automatically establish that a transit procedure has been correctly ended and discharged. Customs must be able to reconcile the departure and destination records and determine whether the obligations of the procedure have been fulfilled.
Arrival
Goods reach the destination or authorised location. Their physical arrival alone does not prove that all customs presentation requirements have been met.
Ending the procedure
The goods and required information are presented to the competent customs office or authorised consignee in accordance with the applicable rules.
Discharge
Customs establish that the procedure has ended correctly, using the comparison of departure and destination information and any necessary controls.
Two customs offices. One reconciled movement.
NCTS enables the exchange of transit information between the relevant customs authorities. The documentary record at departure must be consistent with the information received and verified at destination.
Departure record
Destination record
Customs may discharge the procedure when the applicable requirements have been satisfied.
Further verification, inquiry or recovery action may be required, depending on the circumstances.
When the record breaks. Where the risk begins.
An irregularity may concern the goods, their presentation, the accompanying information or compliance with the conditions of the transit procedure. Not every discrepancy has the same legal or financial consequence.
Missing arrival information
The movement is not recorded as having arrived at destination within the expected period.
Unexplained goods discrepancies
Quantity, weight, packages or goods identification do not correspond to the declaration and control findings.
Seal irregularities
Customs seals are missing, damaged or inconsistent with the authorised identification arrangements.
Unauthorised unloading
Goods are unloaded or handled without complying with the applicable customs instructions or authorisation.
Failure to respect time limits
The prescribed period for presentation is exceeded without an accepted explanation or applicable relief.
Insufficient supporting evidence
Transport and customs records cannot adequately establish what happened to the goods or where they were presented.
No discharge? Customs may initiate an inquiry.
Where the authorities lack sufficient information to discharge a movement, the applicable inquiry procedure may be initiated to establish whether the transit procedure ended correctly or whether a customs debt arose.
The holder of the procedure may be required to provide evidence concerning the goods, their presentation or the circumstances of the movement.
The actual facts and available evidence determine the appropriate customs response.
The expected electronic outcome is not available or is insufficient.
Customs seek relevant information from the competent offices or the holder of the procedure.
Available customs, transport and other admissible records are evaluated.
The authorities determine whether discharge is justified or whether further measures are necessary.
Missing electronic confirmation. What evidence can establish.
The applicable transit rules provide mechanisms for demonstrating that a procedure ended correctly when normal electronic confirmation is unavailable. The admissibility and probative value of evidence are governed by those rules.
Evidence must establish the relevant customs facts.
In the Union transit framework, Article 312 of Implementing Regulation (EU) 2015/2447 addresses alternative proof of the ending of a Union transit procedure.
Depending on the circumstances and legal requirements, evidence may include customs-certified documents or other admissible records establishing that the goods were presented or placed under a subsequent customs procedure.
Official records may provide stronger evidence of presentation or subsequent customs treatment.
Delivery notes, CMR records and carrier information may support an investigation but do not automatically constitute sufficient alternative proof.
The authorities assess whether the documents satisfy the applicable legal requirements for establishing correct ending.
When compliance fails. Potential financial consequences.
A breach of transit obligations may lead to a customs debt, depending on the applicable legal conditions. Liability and recovery must be assessed separately from the mere absence of an electronic discharge message.
Customs debt
Non-compliance with customs obligations may give rise to a debt under Article 79 UCC, subject to the relevant legal conditions and exceptions.
Potential debtors
The holder of the procedure and other persons may be liable where the applicable conditions for debtor status are met.
Guarantee exposure
An applicable transit guarantee may secure the recovery of customs debt and other covered charges, within its legal scope.
Additional consequences
Administrative penalties or other measures may arise under the relevant national and EU legal provisions.
The goods arrived. The transit remains open.
A truck delivers goods to a warehouse. The transport operator holds a signed delivery note, but the transit movement does not show the expected discharge in the customs system.
The delivery note may help establish where and when the goods arrived.
Delivery to a warehouse is not equivalent to presentation under the transit rules.
Verify the MRN, authorised location, arrival records, unloading arrangements and any customs-confirmed evidence.
Customs determine the outcome on the basis of admissible evidence and applicable law.
Verify the outcome. Close the compliance loop.
A robust transit process should include documentary reconciliation and monitoring after the physical movement has ended.
The Union Customs Code governs the ending and discharge of special procedures, the obligations of the holder and customs debt arising through non-compliance. Implementing rules address inquiry procedures and alternative proof.
Transit forms. Questions that matter in practice.
Transit documentation must be understood within the legal and operational framework of the movement. The correct declaration, guarantee, accompanying document and completion evidence depend on the transit procedure and the circumstances of the goods.
Clear distinctions. Better transit decisions.
These answers explain the principal documentary and procedural distinctions under Union and common transit rules. Individual movements must always be assessed against the applicable provisions.
01 What is the difference between a T1 and a T2 transit declaration?
T1 generally identifies external transit, principally used for non-Union goods. T2 generally identifies internal transit, used in the circumstances prescribed for Union goods.
The correct procedure depends on the customs status of the goods, the route and the applicable Union or common transit provisions. The fact that goods are physically located in the EU does not, by itself, establish Union status.
02 Is a Transit Accompanying Document the same as a transit declaration?
No. The transit declaration is the customs declaration lodged and processed through the applicable electronic system. The Transit Accompanying Document (TAD) presents information associated with the transit movement.
The TAD must not be treated as an independent authorisation to move goods. Release for transit and the applicable movement requirements must be satisfied.
03 What is the difference between the MRN and the GRN?
The Movement Reference Number (MRN) identifies the relevant customs movement or declaration.
The Guarantee Reference Number (GRN) identifies an applicable guarantee arrangement. The MRN concerns the customs operation; the GRN concerns financial security.
They serve different functions and must not be used interchangeably.
04 Is a customs guarantee always required for a transit movement?
A guarantee is generally required where the applicable transit rules provide for financial security. However, the legislation also establishes specific exemptions, reductions, waivers and special arrangements.
Whether a guarantee is required, and which type may be used, depends on the legal framework, the goods, the movement and the operator’s applicable authorisations.
05 Does delivery of the goods automatically discharge the transit procedure?
No. Commercial delivery and customs discharge are different events.
The transit procedure must be ended in accordance with the applicable customs requirements. Customs then establish whether it has ended correctly and can be discharged.
A signed delivery note does not automatically establish correct customs ending or discharge.
06 What happens if a transit movement is not discharged?
Customs may initiate an inquiry to establish whether the procedure ended correctly. The holder of the procedure may need to provide relevant supporting evidence.
Depending on the facts, the outcome may involve discharge, further investigation or measures concerning a customs debt and related liability.
Missing electronic confirmation does not automatically establish that a customs debt has arisen.
07 Can an authorised consignee receive transit goods without presenting them at the customs office?
An authorised consignee may receive goods at an authorised location under the conditions of the relevant customs authorisation.
This does not remove the obligation to follow prescribed arrival notifications, customs instructions, unloading controls and other applicable requirements.
08 Are Union transit and common transit the same legal procedure?
No. Union transit is governed by the Union customs legislation. Common transit is governed by the Convention on a Common Transit Procedure.
The systems are closely coordinated and share many operational concepts, but their legal bases and territorial application must be distinguished.
The route and participating customs territories determine which framework applies.
09 Can a transport document replace the normal electronic transit procedure?
An ordinary commercial transport document does not generally replace the required customs transit declaration.
Certain transport modes and legally authorised arrangements may use specific simplifications or alternative procedures.
Their use depends on the applicable legislation and authorisation conditions, not merely on the availability of a CMR, bill of lading or air waybill.
The legal foundation. Primary European sources.
Transit requirements derive from binding legislation and the relevant international agreements. The sources below provide the legal framework for declarations, guarantees, simplifications and discharge.
Union Customs Code
Regulation (EU) No 952/2013
Establishes the general customs framework, including guarantees, customs debt, special procedures and Union transit.
UCC Delegated Act
Commission Delegated Regulation (EU) 2015/2446
Supplements the Union Customs Code with detailed conditions concerning customs procedures, authorisations, guarantees and related requirements.
UCC Implementing Act
Commission Implementing Regulation (EU) 2015/2447
Provides detailed implementation rules for customs procedures, electronic processing, transit controls and inquiry arrangements.
Common Transit Convention
Convention of 20 May 1987 on a Common Transit Procedure
Establishes the common transit framework used between the contracting parties, including the relevant procedural, guarantee and control provisions.
The movement ends. The responsibility must be resolved.
Reliable transit compliance requires more than a correctly completed form. It requires consistent declaration data, appropriate financial security, controlled presentation of goods and documentary evidence of the customs outcome.
EXPLORE CUSTOMS AUTHORISATIONS