Classification is not a keyword search.
EU tariff classification follows a legal structure. Heading wording, Section and Chapter Notes and the General Rules for the Interpretation of the Combined Nomenclature determine how goods move through that structure.
The GIR are a legal framework, not a six-step checklist.
Classification begins with the terms of the headings and the relevant Section or Chapter Notes. Further rules become relevant when the legal analysis requires them. At subheading level, the classification is determined by the applicable subheading wording and Rule 6, together with the preceding rules where relevant.
Heading terms and relevant Section or Chapter Notes form the primary basis for classification.
Rule 2 can extend the scope of heading references in specified circumstances, including certain incomplete or unfinished articles and references to materials or substances.
Rule 3 provides the sequence used in the circumstances it covers when goods are prima facie classifiable under two or more headings.
Rule 4 addresses goods that cannot be classified under the preceding rules and uses the heading appropriate to the goods to which they are most akin.
Rule 5 contains specific provisions for particular containers presented with goods and for packing materials and packing containers.
Rule 6 governs classification at subheading level, comparing only subheadings at the same level and applying the relevant notes and preceding rules as appropriate.
The legal analysis is based on the wording of the headings, the relevant legal notes and the General Rules. This distinction is fundamental when moving from a product description to a defensible commodity code.
Start with the legal text. Not with what the product seems to be.
GIR 1 establishes the starting point for tariff classification: the titles of Sections, Chapters and sub-Chapters are provided for ease of reference, while classification is determined according to the terms of the headings and any relevant Section or Chapter Notes — and, where necessary, the following Rules.
These titles help you understand the broad organisation of the nomenclature, but GIR 1 expressly treats them as being provided for ease of reference.
Read the wording precisely. Do not replace legal nomenclature language with a commercial label that merely sounds similar.
Relevant Notes form part of the classification framework and may determine whether a candidate heading remains legally available.
A heading can look right and still be legally wrong.
Reading only the heading text is not enough when a relevant Section or Chapter Note changes its scope. A Note may define terminology, direct particular goods elsewhere or exclude products that would otherwise appear to fit.
The product description seems to fall within the heading.
The applicable Note changes the scope of the apparent classification path.
The legal text prevails over the initial commercial impression.
Not every piece of text has the same legal role.
Help locate the relevant area of the nomenclature, but are provided for ease of reference under GIR 1.
Form the primary legal basis for heading-level classification under GIR 1.
Can provide important assistance when interpreting the nomenclature, but must be distinguished from the legal text itself.
Extend the heading. Then resolve genuine competition.
GIR 2 addresses particular situations in which goods are incomplete, unfinished, unassembled, disassembled or involve mixtures or combinations of materials. If this results in goods being prima facie classifiable under two or more headings, GIR 3 provides the legal sequence for resolving that competition.
The goods do not always arrive in their complete, simple form.
GIR 2(a) also extends a reference to a complete or finished article to that article when presented unassembled or disassembled.
But if the goods consequently appear classifiable under two or more headings, the issue is resolved according to GIR 3.
Now the task is no longer to extend a heading. It is to decide which competing heading prevails.
GIR 3 has an order. You do not choose the test you prefer.
Is one heading more specific than the others?
The heading providing the most specific description is preferred to headings providing a more general description, subject to the rule’s treatment of certain references to only part of mixed or composite goods or sets.
What gives the goods their essential character?
Where GIR 3(b) applies, mixtures, composite goods consisting of different materials or components, and qualifying sets put up for retail sale are classified as if they consisted of the material or component that gives them their essential character, insofar as that criterion is applicable.
If 3(a) and 3(b) do not resolve it.
The goods are classified under the heading which occurs last in numerical order among those that equally merit consideration.
“Essential character” is not simply the biggest component.
The relevant assessment depends on the goods. The nature of a material or component, its quantity, value, weight or the role it performs in relation to the use of the goods may all be relevant depending on the case.
The objective is to identify, where possible, the material or component that gives the product its defining character for classification purposes.
“Sold together” does not automatically mean “classify together”.
GIR 3(a) comes before GIR 3(b). First determine whether the competition can be resolved by the more specific description.
Value can be relevant, but essential character is a case-specific assessment and is not automatically determined by price.
Numerical order is the final GIR 3 method, used only when the preceding GIR 3 tests do not resolve the classification.
Resolve the exceptions. Then descend to subheading level.
GIR 4 provides a residual solution when goods cannot be classified under the preceding Rules. GIR 5 addresses specified cases, containers and packing materials. GIR 6 then governs classification within a heading at subheading level.
What if Rules 1–3 still do not classify the goods?
GIR 4 directs goods that cannot be classified under the preceding Rules to the heading appropriate to the goods to which they are most akin.
Should the container follow the goods?
GIR 5 contains specific rules for certain cases and similar containers presented with the articles for which they are intended, and for packing materials and packing containers presented with the goods.
Compare like with like. Only subheadings at the same level are comparable.
GIR 6 governs classification within a heading. The terms of the subheadings and relevant Subheading Notes must be read, with the preceding Rules applied mutatis mutandis, on the understanding that only subheadings at the same level are comparable.
Heading-level classification is already established. GIR 6 now determines the route below it.
Re-run the legal analysis at the correct level.
Reaching the right heading does not automatically produce the right commodity code. The wording and legal structure below that heading still have to be analysed.
Work only with subheadings that are legally comparable at the same level.
A Subheading Note can affect the meaning or scope of the subdivisions being considered.
GIR 6 expressly brings the preceding Rules into the subheading analysis, with the necessary adjustments.
Once one branch is selected, continue within that branch until the required nomenclature level is reached.
GIR 6 is where hierarchy becomes operational.
The classification process moves through the nomenclature hierarchy rather than jumping directly from a product name to a final EU code.
Classification determines where the goods belong in the nomenclature. TARIC then allows the applicable EU tariff and commercial-policy measures associated with that classification to be consulted.
Understand TARIC →This diagram is a learning map, not an instruction to apply every Rule mechanically in every classification case. The applicable legal analysis depends on the goods and the classification issue.
One product. One legal path through the nomenclature.
The following example is deliberately generic. It illustrates the classification method rather than recommending a commodity code for a real product.
Product facts are compared with the heading wording and relevant Section or Chapter Notes. A plausible classification area is identified, but the goods are presented incomplete.
The technical evidence is examined to determine whether the article as presented satisfies the GIR 2(a) test.
GIR 3 is not inserted automatically. It becomes relevant only if the classification problem actually requires resolution between competing headings.
The analysis can now move below the heading. This does not yet mean that the final EU commodity code has been reached.
Subheading wording and relevant Notes are analysed and the appropriate branch is followed level by level.
GIR 3, GIR 4 and GIR 5 were not needed in this illustrative path. The Rules are applied according to the classification problem — not because every case must pass through all six.
A classification needs more than a plausible number.
Before the code is used operationally, make sure the factual evidence and the legal reasoning still support the conclusion.
Classification Rules — practical questions
Do I have to apply GIR 1 to GIR 6 in order every time? +
Are Section and Chapter titles legally enough to classify goods? +
Does GIR 2(a) apply to every incomplete product? +
Does the most expensive component determine essential character? +
Can I use GIR 3(c) whenever two headings seem equally possible? +
Why is GIR 6 important for EU commodity codes? +
Are Explanatory Notes legally binding? +
Work from the legal nomenclature, then use official classification resources.
Legal framework for the tariff and statistical nomenclature and the Common Customs Tariff.
Official Commission information on the EU Combined Nomenclature and its annual updates.
EU research environment bringing together relevant classification information and resources.
Official overview of the international Harmonized System nomenclature on which the EU CN is based.
Follow the legal structure. Don’t reverse-engineer the code.
Reliable tariff classification connects the objective characteristics of the goods with the wording, Notes and interpretative rules of the nomenclature.