Waste Shipments
Moving waste across borders requires more than transport documents and customs declarations.
Understand the EU rules governing transboundary waste movements, from waste classification and recovery operations to notification procedures, export restrictions and customs controls.
Read the EU Waste Shipments RegulationEstablish its composition, classification and intended treatment.
Assess notification, information requirements and applicable restrictions.
Verify consent, movement information and relevant customs formalities.
Classify the waste. Determine the procedure.
The legal requirements for a cross-border waste shipment depend on the waste’s identity, composition, intended treatment, destination and applicable regulatory classification. A commercial description or customs code alone is not sufficient.
Three classifications to keep distinct
Different classification systems serve different legal purposes. They must not be treated as interchangeable.
List of Waste code
The European List of Waste identifies waste using six-digit entries. Some entries distinguish hazardous from non-hazardous waste, including mirror entries requiring assessment of hazardous properties.
Waste shipment entries
The shipment regime uses relevant entries and lists derived from the Basel Convention, OECD framework and EU legislation. Composition, contamination and mixtures can affect the applicable procedure.
CN and TARIC codes
Commodity classification is relevant where customs formalities apply. It supports customs controls but does not, by itself, establish the waste shipment category or the required environmental procedure.
Recovery and disposal are not equivalent
The intended operation is a central element of the legal assessment. An operation must be identified by its actual nature, not merely by a commercial description.
Recovering value from waste
Recovery operations are defined in EU waste legislation and include relevant recycling and other recovery activities.
Operations other than recovery
Disposal operations are separately defined under EU waste legislation. Cross-border movements intended for disposal are subject to particularly restrictive rules.
Important distinction: a shipment intended for recovery is not automatically eligible for the general information procedure. The waste entry, composition, destination and other applicable conditions must also be checked.
Two principal procedural pathways
The correct pathway is determined by the applicable waste shipment rules. Some movements are prohibited regardless of the documentation available.
General information requirements
Certain eligible waste shipments intended for recovery may move under the general information procedure, subject to the applicable conditions and documentation.
Main compliance considerations- Confirm eligibility under the relevant waste lists.
- Verify destination and applicable restrictions.
- Provide the required movement information.
- Ensure the required contractual arrangements.
- Meet applicable electronic information requirements.
Prior written notification and consent
Shipments covered by the notification procedure require the relevant notification process and the necessary written consents before the movement can proceed.
Main compliance considerations- Identify the competent authorities concerned.
- Submit the required notification documentation.
- Meet applicable contract and financial guarantee requirements.
- Obtain the necessary consents before shipment.
- Comply with movement and completion obligations.
Five questions before selecting a procedure
Establish whether it is waste, its composition and hazardous properties.
Identify the relevant waste and shipment-list entries.
Assess dispatch, destination, transit and applicable restrictions.
Determine the actual recovery or disposal operation.
Identify the applicable procedure or any prohibition before shipment.
One waste shipment. Different destination rules.
The regulatory route depends on where waste is dispatched, where it is destined, whether it crosses other jurisdictions and whether it is intended for recovery or disposal. The same material can face different requirements depending on the movement.
Four regulatory directions
EU rules govern the movement, including the applicable information or notification procedure and relevant transit conditions.
Export rules depend on waste classification, destination, treatment and applicable restrictions, including rules specific to certain waste streams.
Stricter export restrictions apply, with important changes under the new regulation taking effect according to its transitional timetable.
Imports are subject to the applicable EU import conditions, international commitments and relevant waste shipment procedures.
How the legal assessment changes
Waste movements between Member States
The applicable procedure depends on the waste classification and intended treatment. Certain eligible recovery shipments may follow general information requirements, while other movements require prior written notification and consent.
Waste destined for disposal is subject to particularly restrictive conditions and the relevant notification requirements. The competent authorities of dispatch, destination and, where applicable, transit have defined roles.
Recovery exports outside the EU
Exports to countries covered by the OECD Decision are subject to the relevant EU waste shipment rules and applicable international procedures. OECD status does not automatically make every waste export permissible.
The exporter must assess the waste category, the receiving facility, applicable controls and any waste-specific restrictions. Exports for disposal are governed by separate, restrictive provisions.
Enhanced restrictions and transition rules
EU law imposes significant restrictions on exports of waste to countries not covered by the OECD Decision. Hazardous waste exports for recovery are generally prohibited in the circumstances specified by the applicable legislation.
Regulation (EU) 2024/1157 introduces a new framework for certain non-hazardous waste exports, including a country eligibility mechanism. Its relevant export provisions must be assessed according to their specific application dates.
Waste arriving from third countries
Imports into the Union must comply with the relevant EU waste shipment provisions and applicable international obligations. Whether an import is permitted depends on its origin, waste category and intended recovery or disposal operation.
Where required, the notification and consent process must be completed before the shipment takes place. Customs formalities do not replace environmental authorisations or movement documentation.
Application dates matter
Regulation (EU) 2024/1157 does not bring every provision into effect on the same date. The relevant legal regime must be established for the specific movement and shipment date.
Entry into force
Regulation (EU) 2024/1157 entered into force, subject to its later application dates.
Main application date
Most provisions of the new regulation became applicable, subject to specified exceptions and transitional arrangements.
Further export provisions
Certain provisions governing exports to non-OECD destinations become applicable, subject to the detailed legal timetable.
Plastic waste restrictions
A specific new restriction on certain plastic waste exports to non-OECD countries begins to apply under the new framework.
Transitional caution: some shipments notified under the previous regulatory framework remain subject to transitional provisions. Do not select the applicable procedure using the calendar date alone.
OECD membership, an existing commercial relationship or the availability of a customs declaration does not establish that a waste shipment is legally permitted. The applicable waste-specific requirements must be satisfied.
Before waste moves, the paperwork must be right.
Waste shipment compliance requires a documented procedure involving the relevant operators and, where applicable, competent authorities. The necessary approvals, movement information and financial safeguards must be established before the shipment begins.
From notification to shipment completion
This workflow illustrates the principal stages for shipments requiring prior written notification and consent.
Prepare the notification
Identify the waste, its origin, composition, intended treatment, shipment route, consignee and receiving facility. Compile the required notification information and supporting documents.
Submit to the competent authority
The notifier follows the applicable submission procedure. The authorities concerned assess the notification in accordance with their respective roles and the relevant legal rules.
Establish the required guarantee
Where the prior notification procedure applies, the shipment must be covered by the required financial guarantee or equivalent insurance, subject to the applicable regulatory conditions.
Obtain the necessary written consents
The shipment must not proceed until the necessary consents have been obtained and the applicable conditions for movement are satisfied. Objections or additional conditions must be addressed.
Execute and document the shipment
Provide the required advance information and movement documentation. Ensure the actual transport follows the authorised route, shipment details and conditions.
Confirm receipt and treatment
The receiving facility and relevant operators fulfil the applicable receipt, recovery or disposal confirmation obligations. Required records must be retained.
Which documents belong to which procedure?
The two principal procedures have different documentation requirements. The correct route must be established before preparing the shipment file.
Article 18 shipments
Certain eligible waste shipments for recovery are subject to general information requirements rather than the prior written notification procedure.
Notification and consent shipments
Shipments subject to prior written notification and consent require a more extensive regulatory dossier and competent-authority involvement.
Who is involved in the process?
The legal allocation of responsibilities depends on the applicable procedure and the role of each participant.
Notifier or person arranging the shipment
Organises the relevant procedure, provides required information and fulfils the obligations attached to its legal role.
Competent authorities
Exercise the functions assigned to authorities of dispatch, destination and transit, where applicable.
Consignee and receiving facility
Receive the waste and perform the relevant treatment, reporting and confirmation obligations.
Carrier and customs operators
Carry out their respective transport and customs functions, including applicable documentary and regulatory checks.
Digital documentation is part of the new framework
Regulation (EU) 2024/1157 establishes electronic information exchange arrangements for waste shipment procedures, including the Digital Waste Shipment System (DIWASS). Operators must follow the applicable electronic submission and exchange requirements, subject to the relevant implementation rules and exceptions.
When a waste shipment fails compliance checks.
Waste shipments can be delayed, stopped or investigated when the declared material, documentation or movement does not match the applicable legal requirements. Customs and environmental authorities perform complementary control functions.
What authorities may examine
Controls can involve documentation, physical inspection and verification of the declared waste and the parties responsible for its movement.
Waste identity
Whether the material is correctly identified as waste, including its composition, classification and relevant hazardous properties.
IDENTIFICATIONShipment documents
Whether the applicable notification, consent, movement or general information requirements have been satisfied.
DOCUMENTATIONDestination and facility
Whether the receiving country, consignee and treatment facility are consistent with the applicable shipment rules.
DESTINATIONPhysical load
Whether the actual material, quantities and shipment characteristics correspond to the information provided.
PHYSICAL INSPECTIONWhat makes a shipment illegal?
Regulation (EU) 2024/1157 defines illegal shipments through specified forms of non-compliance. The examples below are illustrative and do not replace the complete legal definition.
A shipment subject to prior written notification proceeds without completing the required procedure.
Waste moves without the necessary consent of the competent authorities concerned.
The relevant notification or consent has been obtained through falsification, misrepresentation or fraud.
The shipment violates relevant legal requirements, including applicable export or import prohibitions.
The regulatory classification of a movement as an illegal shipment is separate from determining administrative penalties, criminal liability or other consequences under applicable national law.
Four situations that require attention
These fictional examples illustrate common compliance risks. The legal outcome of an actual shipment requires a case-specific assessment.
Used equipment declared as a second-hand product
A company exports used electronic equipment described as reusable goods. Some units are damaged and their functionality has not been established.
Compliance questionDoes the material qualify as reusable equipment, or must some or all of it be classified as waste?
A recycling shipment with mixed materials
An exporter describes a load as recyclable plastic waste. Inspection reveals contamination and material fractions that may affect its waste shipment classification.
Compliance questionDoes the shipment meet the conditions of the declared waste entry and applicable movement procedure?
A notified shipment with a changed destination
A shipment has been authorised for a specified receiving facility. Before dispatch, the operator proposes delivery to another treatment installation.
Compliance questionIs the proposed change covered by the existing consent, or is a further procedure required?
A non-OECD export under changing rules
A company plans to export waste for recovery to a non-OECD country. The transaction is scheduled during the transition to the new EU export framework.
Compliance questionWhich restrictions apply on the intended shipment date, and is the destination eligible for that waste category?
When waste must be taken back
EU waste shipment legislation establishes procedures for shipments that cannot be completed as intended and for illegal shipments. Depending on the circumstances, responsible parties may be required to arrange take-back or other legally permitted management of the waste.
The applicable obligations, responsible persons, deadlines and financial consequences depend on the specific legal provisions and facts of the case.
Six controls worth building into the process
Distinguish waste from products and reusable equipment.
Assess composition, mixtures and contamination.
Include transit countries and application dates.
Do not assume that recovery always means Article 18.
Verify actual quantities, operators and facilities.
Document decisions, consents and completion records.
Customs declarations and environmental shipment requirements serve different purposes. Compliance with one does not remove obligations under the other.
Waste shipments frequently asked questions.
Practical answers to common questions about EU waste shipment rules, classification, notification procedures, export restrictions and customs controls.
01 What is the EU Waste Shipments Regulation?
Regulation (EU) 2024/1157 establishes rules governing shipments of waste between EU Member States, imports into the Union, exports from the Union and certain transit movements.
It regulates the conditions under which waste may move across borders, including information requirements, prior notification and consent, restrictions, inspections and obligations when shipments cannot be completed or are illegal.
02 When did Regulation (EU) 2024/1157 become applicable?
The regulation entered into force on 20 May 2024. Most of its provisions apply from 21 May 2026, while certain provisions have different application dates.
Specific transitional rules also govern some shipments initiated under Regulation (EC) No 1013/2006. Operators must therefore establish which provisions apply to the particular shipment and date.
03 Do all waste shipments require prior written consent?
No. Certain eligible shipments of waste intended for recovery are subject to general information requirements under Article 18 rather than the prior written notification and consent procedure.
Other shipments require notification and consent. The applicable route depends on the waste classification, treatment operation, destination and relevant legal conditions.
04 What is the difference between green-listed waste and hazardous waste?
Green-listed waste refers to waste entries that may qualify for simplified shipment procedures under specified conditions. Hazardous waste is identified through the applicable hazardous waste criteria.
These classifications serve different purposes and are not interchangeable. Contamination, mixtures, intended treatment and destination restrictions can affect the procedure even where a green-listed entry appears relevant.
05 Can waste be exported from the EU to a non-OECD country?
Only where the applicable EU rules permit the export. The legislation imposes significant restrictions, particularly for hazardous waste and certain waste streams.
Regulation (EU) 2024/1157 introduces additional export restrictions and a new destination-country eligibility framework, subject to specific application dates. The legal position must be checked for the actual waste category, destination and shipment date.
06 Is a customs declaration sufficient to export waste?
No. A customs declaration does not replace the environmental requirements governing waste shipments.
Depending on the movement, operators may need to comply with waste shipment information requirements, obtain prior written consent, observe export prohibitions and provide supporting documentation for the relevant controls.
07 What happens when a waste shipment is illegal?
An illegal shipment can trigger regulatory intervention and the procedures established by EU law for the management or take-back of the waste.
The responsible parties, required actions, deadlines and potential sanctions depend on the specific circumstances and applicable legislation. An illegal shipment does not automatically establish criminal liability without the relevant legal assessment.
08 What is DIWASS in EU waste shipment procedures?
DIWASS is the EU Digital Waste Shipment System associated with electronic information exchange under the new waste shipment framework.
The system supports digital handling of relevant shipment information and procedural documentation. Operators must comply with the applicable electronic exchange requirements and implementing rules.
EU legislation and international framework
Consult the current legal texts and their amendments before assessing a specific waste shipment.
The new EU framework governing waste shipments, including movement procedures, restrictions, inspections and electronic information exchange.
Read on EUR-Lex ↗ PREVIOUS EU REGULATION Regulation (EC) No 1013/2006The previous EU waste shipment framework, relevant where specific transitional provisions continue to apply.
Read on EUR-Lex ↗ EU DIRECTIVE Directive 2008/98/ECThe Waste Framework Directive, establishing fundamental concepts including waste, recovery, disposal and hazardous waste.
Read on EUR-Lex ↗ EU DECISION Decision 2000/532/ECThe European List of Waste, providing waste identification entries and supporting hazardous waste classification.
Read on EUR-Lex ↗ INTERNATIONAL CONVENTION Basel ConventionInternational framework addressing transboundary movements and environmentally sound management of hazardous and other wastes.
Official convention website ↗ EU DIRECTIVE Directive 2012/19/EUThe WEEE Directive, relevant to waste electrical and electronic equipment, including distinctions between used equipment and waste.
Read on EUR-Lex ↗