Customs Explorer
⌕

Customs Explorer

AES declarations

AES / EXPORT DECLARATIONS

AES Export Declarations.

An export declaration starts the electronic customs process for goods leaving the European Union. Understand how declarations are lodged, accepted, checked and released for export through the Automated Export System — and why release is not the same as confirmation of exit.

Electronic filing Declaration acceptance Customs controls Release for export
DECLARATION JOURNEY AES / EXPORT
01
Lodge the declaration

Submit the required export data through the applicable electronic customs interface.

02
Acceptance & MRN

Following acceptance, the declaration receives its Movement Reference Number.

03
Controls & release

Customs may carry out checks before granting release for export.

04
Exit & confirmation

Departure from the EU and certification of exit follow as separate stages.

NOTE This is a simplified standard export flow. Special procedures, simplifications and national interfaces may introduce additional steps.
DECLARATION STRUCTURE

An export declaration is more than a shipment description.

AES declarations combine information about the parties, goods, customs procedure, transport and supporting records. The required data depends on the declaration type and the applicable EU and national implementation requirements.

01 / PARTIES

Who is involved?

Identify the exporter, declarant and representative, where applicable, using the relevant identification and customs data.

Exporter Declarant EORI
02 / GOODS

What is being exported?

Describe and classify the goods with the appropriate commodity code, quantity, mass and other required item-level information.

Commodity code Goods description Mass
03 / PROCEDURE

Which customs treatment?

Specify the requested customs procedure and other relevant procedure information, including any applicable additional procedure codes.

Procedure code Additional procedure
04 / TRANSPORT

How will the goods move?

Provide the required transport, routing and location information so that the declaration can be processed by the competent customs authorities.

Transport mode Locations Routing
05 / VALUE

What is the declared value?

Include the required invoice, currency, statistical value and other commercial information according to the applicable data requirements.

Invoice data Currency Statistical value
06 / REFERENCES

Which records support it?

Declare relevant document references, authorisations, certificates and other supporting information when required by the procedure or applicable measures.

Documents Authorisations Certificates
IMPORTANT DISTINCTION Declaration data and supporting documents are not the same thing.

Some information must be included directly in the electronic declaration. Supporting documents may need to be referenced, held available or presented to customs, depending on the applicable rules.

EXPLORE THE AES HUB
DECLARATION LIFECYCLE

Submitted does not mean released.

Filing an export declaration is the beginning of a customs process, not its conclusion. Understanding each stage helps traders distinguish technical submission, legal acceptance, customs controls and permission to proceed.

01
SUBMISSION SENT

Declaration lodged

The declarant submits the export declaration using the applicable national electronic customs interface. The message must satisfy the relevant technical and data requirements before it can proceed.

02
ACCEPTANCE ACCEPTED

Customs accepts the declaration

Once the legal conditions for acceptance are met, customs accepts the declaration. An MRN identifies the accepted declaration and enables subsequent processing and tracking.

03
VERIFICATION CONTROL STAGE

Risk assessment and possible controls

Customs may verify the declaration, examine supporting documents or inspect the goods. Not every accepted declaration is subject to a physical examination.

04
RELEASE RELEASED

Goods released for export

Where the applicable conditions are fulfilled, customs releases the goods for the export procedure. The goods can then proceed towards exit in accordance with the relevant customs requirements.

WHEN DECLARATION DATA CHANGES

An error does not always mean starting again.

The correct response depends on the declaration’s legal and operational status. A technical rejection, an amendment to an accepted declaration and an invalidation are different processes with different consequences.

01 / BEFORE ACCEPTANCE

Technical rejection

If a submission fails the applicable validation rules, it may be rejected before customs acceptance. The declarant must identify the error, correct the data and submit a valid declaration.

KEY DISTINCTION A rejected submission is not an accepted declaration being amended.
VALIDATION / RESUBMISSION
02 / AFTER ACCEPTANCE

Declaration amendment

The declarant may request an amendment to particulars of an accepted declaration, subject to the conditions of Article 173 UCC. The amendment cannot extend the declaration to different goods.

IMPORTANT LIMIT Ordinary pre-release amendment is restricted once customs announces an examination, identifies incorrect particulars or releases the goods.
ARTICLE 173 UCC
03 / DECLARATION NO LONGER VALID

Declaration invalidation

Invalidation concerns an accepted declaration that should no longer produce its intended customs effects. It requires a legal basis and the applicable customs procedure; it is not simply another way to edit declaration data.

IMPORTANT LIMIT After release, invalidation is generally restricted to cases specifically provided for by customs legislation.
ARTICLE 174 UCC
QUICK DECISION GUIDE

Which situation are you dealing with?

Identify the declaration status before deciding whether to correct, amend or request invalidation.

A
SUBMISSION REJECTED Correct the error and resubmit

Follow the rejection information returned by the relevant electronic system.

B
ACCEPTED / NOT RELEASED Assess whether amendment is permitted

Check the legal restrictions and the current declaration state before requesting a change.

C
ALREADY RELEASED Consider post-release legal procedures

A post-release amendment may be permitted under Article 173(3) UCC. Invalidation is subject to specific exceptions.

POST-RELEASE AMENDMENT

The three-year rule is not an automatic right to change any declaration.

Under Article 173(3) UCC, an amendment may be permitted on application within three years from acceptance, where necessary to fulfil obligations relating to the customs procedure. It is distinct from the ordinary pre-release amendment workflow.

RELATED GUIDANCE

Understand AES errors and operational problems.

Technical rejections, processing interruptions and customs decisions require different responses. Explore the dedicated troubleshooting guide.

AES TROUBLESHOOTING
PRACTICAL EXPORT CONTROL

Before you submit. Check what matters.

Many declaration problems begin before the electronic message reaches customs. A structured pre-submission review can reduce avoidable errors, inconsistencies and requests for clarification.

PRE-SUBMISSION REVIEW

Six essential verification areas

01 — 06
01

Exporter and declarant

Verify the relevant party identification, EORI numbers, representation arrangements and consistency with the commercial records.

EORI Representation Party details
02

Commodity classification

Confirm the appropriate commodity code, goods description, quantities and mass. Check whether classification affects export measures or restrictions.

Commodity code Description Measures
03

Procedure and authorisations

Verify the requested customs procedure, additional procedure codes and any authorisation or simplification relevant to the intended export operation.

Procedure Authorisations Simplifications
04

Commercial and statistical data

Reconcile invoice information, currency, values, delivery terms and statistical data with the declaration requirements applicable to the operation.

Invoice Value Incoterms
05

Transport and customs offices

Check transport information, relevant locations, the competent customs office and the intended route towards exit from the EU customs territory.

Transport Customs office Exit
06

Documents and export restrictions

Confirm the supporting document references, applicable certificates and licences, and whether prohibitions, restrictions or export-control measures apply.

Documents Licences Export controls
AES DECLARATIONS / REFERENCE DESK

Export declarations. Questions answered.

Practical answers to common questions about electronic export declarations, MRNs, customs acceptance, release and confirmation of exit.

01 Is an export declaration always submitted through AES?

AES is the electronic system used for export and re-export declarations within its scope. Certain exceptions and simplified forms of declaration are permitted by customs legislation. The applicable declaration method depends on the goods, procedure and legal circumstances.

02 Does submitting a declaration automatically create an MRN?

No. A submission must satisfy the relevant validation and acceptance conditions. Once the declaration is accepted, an MRN is allocated to identify it. A rejected submission does not follow the same processing path as an accepted declaration.

03 Can goods leave immediately after declaration acceptance?

Acceptance is not release. Customs may carry out documentary or physical controls before releasing the goods. After release for export, the applicable exit formalities must still be completed.

04 Is release for export proof that the goods left the EU?

No. Release for export and certification of exit are distinct events. The customs office of export certifies exit on the basis of the applicable exit information or other evidence accepted under customs legislation.

05 Can an accepted export declaration be amended?

Yes, subject to Article 173 UCC. Ordinary amendments are restricted in certain circumstances, including after release. Article 173(3) also provides for possible post-release amendments on application within three years from acceptance, where the relevant legal conditions are satisfied.

06 What happens if the export declaration contains an error?

The response depends on its status and the nature of the error. A rejected submission may require correction and resubmission. An accepted declaration may be amended where permitted, while invalidation follows separate legal conditions.

07 Does AES use the same trader interface in every Member State?

No. AES combines common EU-level components with national components. Traders may interact through the applicable national customs portal, software interface or authorised electronic connection. Local implementation and message requirements should be checked with the relevant customs authority.

CUSTOMS EXPLORER / AES KNOWLEDGE HUB

Understand the declaration. Follow the movement.

A reliable export process depends on accurate declaration data, correct customs procedures and a clear distinction between release and exit.

EU CUSTOMS SYSTEMS