Customs Explorer
⌕

Customs Explorer

Prohibitions and Restrictions overview

EU CUSTOMS COMPLIANCE REGULATORY CONTROLS

Prohibitions & Restrictions

Not every product can cross every border.

Understand the EU rules that prohibit, restrict or condition the movement of certain goods. Explore the permits, certificates, regulatory authorities and customs checks that may apply to imports, exports and other cross-border movements.

Explore controlled goods
8 regulatory guides / EU-focused reference
01 Identify Product and legal scope
02 Verify Restrictions and documents
03 Comply Applicable customs requirements
REGULATORY CONTROL FRAMEWORK EU / 891
EU CUSTOMS CONTROL
01 PERMITS
02 CERTIFICATES
03 RESTRICTIONS
04 VERIFICATION

Regulatory requirements vary by product, origin, destination, customs procedure and applicable law.

UNDERSTANDING THE FRAMEWORK 01 / FUNDAMENTALS

Not all restrictions work the same way.

EU customs compliance is not simply a question of whether goods can be imported or exported. Different legal regimes establish different conditions: some movements are prohibited, others require authorisation, and others are subject to documentary or physical controls.

01 LEGAL PROHIBITION

Prohibited goods or movements

The applicable law prevents a particular movement of goods. A prohibition may concern a product, a destination, an origin, a person or a specific transaction.

Key distinction A customs declaration cannot override an applicable legal prohibition.
02 CONDITIONAL MOVEMENT

Restricted goods

Movement is possible only when the conditions established by the relevant legislation are satisfied. These may concern product characteristics, permitted uses or authorised destinations.

Key distinction A restriction does not necessarily amount to a complete ban.
03 PRIOR AUTHORISATION

Permits and certificates

Certain movements require a permit, licence, certificate or other regulatory document issued or recognised under the applicable legal framework.

Key distinction The required document and issuing authority depend on the specific regime.
04 REGULATORY VERIFICATION

Official controls

Competent authorities may carry out documentary, identity or physical checks where required by the relevant legislation. Customs and other authorities may perform different but complementary functions.

Key distinction A customs check does not automatically replace a sector-specific official control.
THE COMPLIANCE LOGIC

From product identification to regulatory decision.

Before assessing the customs treatment, operators must establish which non-customs rules apply to the goods and the intended movement.

!

A commodity code is an important starting point, but it is not always sufficient. Species, composition, intended use, origin, destination and other characteristics may determine the applicable restrictions.

START Identify the goods and movement Product · Classification · Origin · Destination
CHECK 01 Is a prohibition applicable? Assess the relevant EU and national rules
YES Movement not permitted Unless an applicable legal exception or derogation permits it
NO Continue assessment Check conditional restrictions and regulatory requirements
CHECK 02 Are permits or controls required? Verify competent authorities, documents and control procedures
OUTCOME Establish the lawful customs route Subject to all applicable customs and non-customs requirements
PRACTICAL INTERPRETATION

Similar customs movements. Different regulatory obligations.

Example Regulatory issue Practical consequence
Protected wildlife specimen EU wildlife trade controls Determine the species and applicable EU Annex; assess permits, certificates and any prohibition.
Food of animal origin Animal health and food safety Verify the applicable import conditions, certification and official border controls.
Potential dual-use item Export control legislation Assess classification, destination, end use and applicable authorisation requirements.
Cross-border waste shipment Waste shipment rules Determine waste classification, shipment type, destination and applicable notification or information requirements.

Illustrative examples only. The actual requirements depend on the legislation applicable to each specific transaction.

i

Core principle: Customs release and compliance with non-customs legislation are connected but distinct legal questions. The absence of a customs duty or the acceptance of a customs declaration does not remove an applicable prohibition or regulatory requirement.

EU REGULATORY LANDSCAPE 02 / LEGAL FRAMEWORK

One customs border. Multiple legal frameworks.

EU prohibitions and restrictions do not arise from a single regulatory instrument. Different legal regimes protect public health, biodiversity, cultural heritage, the environment, product safety and international security.

THE REGULATORY ARCHITECTURE CONCEPTUAL MODEL / EU
EU CUSTOMS BORDER INTERFACE

Customs authorities apply customs legislation and perform their functions in relation to prohibitions and restrictions, in cooperation with other competent authorities.

01
Health & Biosecurity Animals · Plants · Food · Feed
+
02
Environment & Biodiversity Protected species · Waste
+
03
Product & Cultural Protection Product safety · Cultural goods
+
04
Security & Strategic Trade Controlled items · End use · Licensing
+
CUSTOMS LEGISLATION
SECTOR-SPECIFIC EU LAW
NATIONAL IMPLEMENTATION
REGULATORY DIRECTORY

Eight regulatory areas. Eight different control regimes.

08 LEGAL DOMAINS

Expand each area to identify its principal EU legislation, the authorities generally involved and the customs relevance. The references below are starting points, not exhaustive legal inventories.

01 AH Animal Health Controls Veterinary requirements and border controls
PRINCIPAL EU LEGISLATION

Animal Health Law

Regulation (EU) 2016/429 establishes the framework for the prevention and control of transmissible animal diseases. Regulation (EU) 2017/625 governs official controls, including relevant border control arrangements.

Regulation 2016/429 ↗ Regulation 2017/625 ↗
AUTHORITIES & CUSTOMS INTERFACE

Veterinary and customs authorities

Competent veterinary authorities perform the relevant animal health controls. Customs authorities interact with these requirements when goods enter or leave the customs territory and when release is legally conditioned on the applicable controls.

Animal Health Controls guide →
02 CT CITES Goods Protected species and wildlife trade
PRINCIPAL EU LEGISLATION

EU Wildlife Trade Regulations

Council Regulation (EC) No 338/97 establishes EU controls on trade in protected species. Commission Regulation (EC) No 865/2006 lays down detailed implementing rules. Species listings and applicable amendments must be checked.

Regulation 338/97 ↗ Regulation 865/2006 ↗
AUTHORITIES & CUSTOMS INTERFACE

CITES authorities and customs

Designated management authorities administer the relevant CITES permits and certificates. Customs authorities verify compliance with applicable import and export requirements at designated points of entry or exit where required.

CITES Goods guide →
03 CG Cultural Goods Cultural heritage and protected objects
PRINCIPAL EU LEGISLATION

Import and export of cultural goods

Regulation (EU) 2019/880 governs the introduction and import of cultural goods into the Union. Council Regulation (EC) No 116/2009 establishes EU export controls for specified categories of cultural goods.

Regulation 2019/880 ↗ Regulation 116/2009 ↗
AUTHORITIES & CUSTOMS INTERFACE

Cultural authorities and customs

Designated competent authorities administer relevant licences and regulatory requirements. Customs authorities perform their assigned controls and verify the applicable documentation for covered movements.

Cultural Goods guide →
04 FF Food & Feed Controls Food safety and official border controls
PRINCIPAL EU LEGISLATION

General Food Law and Official Controls

Regulation (EC) No 178/2002 establishes general principles of food law. Regulation (EU) 2017/625 governs official controls, including relevant import controls on food and feed.

Regulation 178/2002 ↗ Regulation 2017/625 ↗
AUTHORITIES & CUSTOMS INTERFACE

Food safety authorities and customs

Competent food and feed authorities perform sector-specific official controls. Customs authorities cooperate where required and take account of applicable regulatory conditions before releasing goods for the relevant customs procedure.

Food & Feed Controls guide →
05 PH Plant Health Controls Phytosanitary requirements and plant protection
PRINCIPAL EU LEGISLATION

EU Plant Health Regulation

Regulation (EU) 2016/2031 establishes protective measures against pests of plants. Regulation (EU) 2017/625 provides the official controls framework for relevant plant health requirements.

Regulation 2016/2031 ↗ Regulation 2017/625 ↗
AUTHORITIES & CUSTOMS INTERFACE

Plant health authorities and customs

Plant protection authorities carry out phytosanitary controls. Customs authorities cooperate with those authorities and apply relevant restrictions and release conditions under the applicable law.

Plant Health Controls guide →
06 PS Product Safety Controls Conformity and market surveillance
PRINCIPAL EU LEGISLATION

Market Surveillance Regulation

Regulation (EU) 2019/1020 establishes the market surveillance and product compliance framework, including controls on products entering the Union market. Additional product-specific harmonisation legislation may apply.

Regulation 2019/1020 ↗
AUTHORITIES & CUSTOMS INTERFACE

Market surveillance and customs

Market surveillance authorities assess compliance within their competences. Authorities designated for controls at the external border cooperate with market surveillance authorities under the applicable product compliance framework.

Product Safety Controls guide →
07 SG Strategic Goods Controls Dual-use items and export authorisations
PRINCIPAL EU LEGISLATION

EU Dual-Use Regulation

Regulation (EU) 2021/821 establishes the Union regime for controlling exports, brokering, technical assistance, transit and transfer of dual-use items. Other strategic trade, military and sanctions rules may also apply.

Regulation 2021/821 ↗
AUTHORITIES & CUSTOMS INTERFACE

Licensing authorities and customs

Competent licensing authorities administer the applicable authorisations. Customs authorities perform their assigned control functions and verify compliance with relevant export restrictions.

Strategic Goods Controls guide →
08 WS Waste Shipments Environmental rules and transboundary movements
PRINCIPAL EU LEGISLATION

EU Waste Shipment Framework

Regulation (EU) 2024/1157 establishes the revised framework for shipments of waste. Transitional provisions mean that Regulation (EC) No 1013/2006 remains relevant for certain movements and procedures. Applicable dates must be verified.

Regulation 2024/1157 ↗ Regulation 1013/2006 ↗
AUTHORITIES & CUSTOMS INTERFACE

Environmental authorities and customs

Competent waste shipment authorities administer notification, consent and other applicable requirements. Customs authorities participate in controls and cooperation according to the governing legislation.

Waste Shipments guide →
INSTITUTIONAL RESPONSIBILITIES

Different authorities. Complementary responsibilities.

01 EU FRAMEWORK

European Union legislation

Establishes harmonised legal requirements, prohibitions, restrictions and control mechanisms within the scope of each regime.

02 SECTOR AUTHORITY

Competent regulatory authorities

Carry out assigned regulatory functions, including issuing authorisations, conducting official controls and determining compliance where legally required.

03 BORDER INTERFACE

Customs authorities

Apply customs legislation, perform assigned border controls and cooperate with other authorities to enforce applicable prohibitions and restrictions.

04 ECONOMIC OPERATOR

Businesses and declarants

Identify the applicable requirements, obtain necessary documents and ensure the relevant information and evidence are available under the governing rules.

COMMON CUSTOMS FOUNDATION

Union Customs Code Regulation (EU) No 952/2013

Article 134 of the Union Customs Code provides that goods brought into the customs territory of the Union are subject to customs supervision and may be subject to controls, including prohibitions and restrictions justified by specified public-interest objectives.

OFFICIAL SOURCE Read the Union Customs Code ↗

Legal interpretation note. The regulations listed above are principal reference instruments, not complete lists of applicable rules. Delegated acts, implementing acts, annex amendments, transitional provisions, national measures and transaction-specific restrictions must be checked against current official sources.

THE CUSTOMS CONTROL JOURNEY 03 / OPERATIONAL PROCESS

From product identification to the customs decision.

Regulatory compliance starts before a customs declaration is lodged. The applicable controls depend on the goods, the direction of movement, the customs procedure and the relevant sector-specific legislation.

COMPLIANCE WORKFLOW 06 STAGES
01
BEFORE SHIPMENT IDENTIFY

Establish the product identity

Identify the goods accurately, including their composition, technical characteristics, intended use and other attributes relevant to regulatory controls.

Product description Commodity classification Relevant characteristics
02
REGULATORY ASSESSMENT SCREEN

Determine applicable restrictions

Assess the applicable EU and national requirements. Consider origin, destination, movement type, end use, persons involved and relevant prohibitions or derogations.

EU measures National rules Transaction scope
03
AUTHORISATION STAGE DOCUMENT

Obtain regulatory documentation

Where required, obtain the appropriate licences, permits, certificates, notifications or other evidence from the competent authority before the legally prescribed deadline.

Permits Certificates Supporting evidence
04
CUSTOMS FORMALITIES DECLARE

Present the required customs data

Complete the relevant customs formalities and provide or reference regulatory documents as required. The correct procedure and data requirements depend on the movement and applicable legislation.

Declaration data Document references Procedure requirements
05
CONTROL AND VERIFICATION VERIFY

Complete the applicable controls

Customs and other competent authorities perform their respective controls. These may include documentary checks, identity verification, physical inspection or validation of regulatory information.

Document checks Authority decisions Physical controls
06
REGULATORY OUTCOME DECIDE

Determine whether movement can proceed

The outcome depends on the applicable legal conditions, completed controls and competent authority decisions. Goods may be released, held pending further action or refused the requested treatment.

Release conditions Pending action Non-compliance measures
POSSIBLE CONTROL OUTCOMES

Three operational paths. Not one automatic result.

The actual legal consequences depend on the applicable regulatory regime and the decisions of the authorities with the relevant powers.

01

Requirements satisfied

The relevant regulatory conditions are fulfilled and the competent controls are completed. Customs release may proceed when all other applicable requirements are also met.

POTENTIAL RELEASE
02

Further action required

Additional documents, clarification, inspection or a competent authority decision may be necessary before the relevant movement can proceed.

PENDING ASSESSMENT
03

Movement not permitted

An applicable prohibition or unresolved non-compliance may prevent the requested customs treatment. The competent authorities determine the legally available measures.

RESTRICTION / ENFORCEMENT
! IMPORTANT DISTINCTION

A customs declaration, a regulatory permit and an official control are not interchangeable. Each has a distinct legal function. A valid authorisation does not automatically establish that every customs requirement has been fulfilled, and completion of customs formalities does not eliminate an outstanding sector-specific restriction.

PRACTICAL COMPLIANCE 04 / RISK PREVENTION

Prevent the problem before goods reach the border.

Effective management of prohibitions and restrictions requires more than collecting documents before customs clearance. Businesses need reliable product information, regulatory screening, defined responsibilities and evidence that the applicable conditions have been satisfied.

COMPLIANCE CONTROL DASHBOARD
PRE-SHIPMENT REVIEW / MODEL
CONTROL READINESS

Five checks. One documented decision.

A structured review helps identify restrictions early and ensures that unresolved regulatory questions are not treated as routine customs documentation issues.

05 CORE PRE-SHIPMENT
CONTROL AREAS
!

This is an illustrative internal compliance framework, not an official EU certification or customs risk-scoring system.

01
Product identification

Description, classification, composition and relevant characteristics

01/05
02
Regulatory screening

Applicable EU and national measures, prohibitions and conditional restrictions

02/05
03
Authority requirements

Competent authorities, permits, certificates and official controls

03/05
04
Document consistency

Validity, quantities, identifiers, declared goods and supporting evidence

04/05
05
Decision and escalation

Responsible person, unresolved issues, corrective actions and approval to proceed

05/05
COMMON COMPLIANCE FAILURES

Where regulatory problems begin.

The following examples illustrate recurring failure points. They are not statistical rankings of customs violations or official risk categories.

RISK 01 !

Incorrect product assessment

Regulatory obligations are assessed only from the tariff code, without verifying species, composition, technical properties or intended use.

PREVENTIVE CONTROL Validate the technical product description against the relevant legal definitions and annexes.
RISK 02 !

Missing prior authorisation

Goods are dispatched before a required licence, permit or certificate has been obtained, or before a mandatory procedure has been completed.

PREVENTIVE CONTROL Confirm the legal timing and conditions of authorisation before arranging shipment.
RISK 03 !

Inconsistent documentation

Regulatory documents do not correspond to the actual goods, quantities, parties, countries or movement covered by the customs formalities.

PREVENTIVE CONTROL Reconcile regulatory documents, commercial records and customs data before submission.
RISK 04 !

Unclear authority responsibilities

The operator assumes that customs clearance automatically replaces the approval or inspection required by another competent authority.

PREVENTIVE CONTROL Identify the competent authority and establish which decisions must precede the relevant release.
DOCUMENT CONTROL MATRIX

Check the evidence. Not just its existence.

A document may be genuine but still unsuitable for the particular goods, movement or procedure. Review the conditions established by the applicable legal regime.

Control point What to verify Typical evidence
01 Legal applicability Whether the specific goods and movement fall within the scope of the regulatory measure. Product specifications, applicable legal provisions and regulatory classification.
02 Authorisation status Whether an authorisation is required, valid and applicable to the transaction. Permit, licence, certificate or competent authority decision.
03 Document coverage Whether quantities, goods, parties and geographical scope match the intended movement. Regulatory document, invoice, packing list and shipment information.
04 Official controls Whether required regulatory inspections or checks have been completed and their outcomes recorded. Official control records, notifications or relevant authority decisions.
05 Customs consistency Whether declaration data, document references and procedure requirements are consistent. Customs declaration, supporting documents and applicable reference codes.

Document types and control requirements vary by regulatory regime. This matrix is an internal review aid, not a universal legal checklist.

REAL-WORLD COMPLIANCE SCENARIOS

Four shipments. Four different questions.

These illustrative situations show why a single customs document checklist cannot replace product-specific regulatory analysis.

SCENARIO / 01 CITES

Leather goods from a protected species

A shipment contains leather articles made from an animal species potentially covered by EU wildlife trade controls.

Critical question Which species is involved, which EU Annex applies and what trade documents or restrictions follow?
Explore CITES Goods ↗
SCENARIO / 02 PLANT HEALTH

Plants arriving from a third country

An importer plans to introduce plants or plant products potentially subject to phytosanitary import conditions and official controls.

Critical question Are the goods permitted, and which phytosanitary documents, notifications and inspections apply?
Explore Plant Health ↗
SCENARIO / 03 STRATEGIC TRADE

Industrial equipment for export

An exporter supplies equipment that may meet the technical parameters of a controlled dual-use item.

Critical question Is the item controlled, and do destination, end use or end-user factors trigger an authorisation?
Explore Strategic Goods ↗
SCENARIO / 04 WASTE SHIPMENTS

Materials shipped for recovery

A business arranges an international shipment of materials described commercially as recyclable.

Critical question Are the materials legally waste, and which shipment controls, restrictions or notification procedures apply?
Explore Waste Shipments ↗
GOVERNANCE & RESPONSIBILITY

Compliance needs an accountable process.

01 Product owner

Supplies accurate technical information and identifies relevant product changes.

02 Compliance function

Assesses applicable restrictions, documents legal conclusions and escalates unresolved questions.

03 Logistics & customs

Coordinates shipment timing, declaration requirements and regulatory documentation.

04 Management oversight

Establishes responsibilities, review procedures and controls appropriate to the business.

These are suggested internal business roles. They do not replace the legal responsibilities assigned to economic operators, declarants, representatives or competent authorities under the applicable legislation.

i

Operational principle: When a regulatory requirement is uncertain, obtain clarification from the competent authority or appropriately qualified specialists before proceeding. Internal checklists support compliance, but do not authorise a prohibited movement or replace a legally required permit.

KNOWLEDGE & REFERENCE CENTER 05 / EXPLORE FURTHER

Go beyond the overview. Explore every regulatory regime.

Each area of EU prohibitions and restrictions has its own legal scope, control mechanisms and documentation requirements. Explore the dedicated guides, review the official legal framework and find answers to common customs compliance questions.

EXPLORE THE CLUSTER

Eight dedicated guides. One connected knowledge base.

08 REGULATORY
TOPICS
FREQUENTLY ASKED QUESTIONS

Questions that matter at the EU customs border.

01 What are prohibitions and restrictions in EU customs?

Prohibitions and restrictions are legal measures that prevent or condition particular movements of goods. They may protect health, safety, the environment, cultural heritage, public security or other legally recognised interests. Their application depends on the relevant EU and, where applicable, national legislation.

02 Are all restricted goods prohibited from entering the EU?

No. Some goods are prohibited, while others may enter or leave only if specified legal conditions are met. Those conditions may include licences, certificates, notifications, inspections or restrictions on particular uses and destinations.

03 Is the TARIC commodity code sufficient to identify all restrictions?

No. TARIC is an important tool for identifying EU measures associated with tariff classification, but regulatory scope may also depend on species, technical specifications, composition, end use, origin, destination and the parties involved. Additional legislation and national requirements may need to be examined.

04 Who issues permits and certificates for restricted goods?

The issuing authority depends on the relevant regulatory framework. CITES management authorities, export licensing authorities, veterinary authorities and other designated bodies have different responsibilities. Customs authorities do not automatically issue or replace sector-specific authorisations.

05 Can customs release goods without the required regulatory approval?

Where applicable legislation makes release conditional on regulatory approval or completion of an official control, those conditions must be respected. The precise customs consequences depend on the governing rules and competent authority decisions.

06 Do prohibitions and restrictions apply to exports as well as imports?

Yes. Depending on the legal regime, measures may apply to imports, exports, transit, re-exports or other cross-border movements. For example, strategic goods, protected species and certain waste shipments may be subject to export-related restrictions.

07 What happens when regulatory documents are missing?

Depending on the legislation, missing or invalid documents may lead to additional checks, suspension of release, refusal of the requested treatment or other legally prescribed measures. Not every documentary deficiency can be corrected after the goods have arrived.

08 Does EU CSW-CERTEX replace regulatory permits?

No. EU CSW-CERTEX supports the electronic exchange and verification of information relating to covered Union non-customs formalities. It does not remove the underlying regulatory requirements or replace the legal powers of competent authorities.

Explore EU CSW-CERTEX ↗
OFFICIAL LEGAL REFERENCES

Built on legislation. Not assumptions.

These official sources provide the common customs framework and major sector-specific legal foundations. Consult the current consolidated texts, amendments and implementing measures before applying a rule to a transaction.

LEGAL SCOPE

The references above are selected foundational instruments, not a complete catalogue of EU prohibitions and restrictions. Additional regulations, delegated and implementing acts, annex amendments, transitional rules, sanctions measures and national provisions may apply. In particular, the revised waste shipment regime includes transitional arrangements.

CUSTOMS EXPLORER EU COMPLIANCE KNOWLEDGE BASE

Understand the rule. Verify the requirement.

Reliable customs compliance begins with understanding the goods, identifying the applicable legal framework and coordinating the necessary regulatory and customs procedures.

KNOWLEDGE SERIES PROHIBITIONS
& RESTRICTIONS
EU CUSTOMS COMPLIANCE