Customs Explorer
⌕

Customs Explorer

AEO-S

EU AUTHORISED ECONOMIC OPERATOR SECURITY & SAFETY

AEOS. Secure the supply chain. Build trusted trade.

Authorised Economic Operator for Security and Safety (AEOS) is the EU customs authorisation recognising operators that meet the required compliance, control, financial and international supply-chain security standards.

From warehouse access to cargo integrity and business-partner security, AEOS focuses on protecting international goods movements and provides access to specific safety and security facilitations under EU customs law.

01 / AUTHORISATION Article 38(2)(b)

EU AEO authorisation for security and safety facilitations.

02 / SECURITY CRITERION Article 39(e)

Appropriate measures protecting the international supply chain.

03 / INTERNATIONAL RECOGNITION Mutual Recognition

Potential benefits under applicable agreements with partner countries.

01 / AEOS SECURITY REQUIREMENTS

Security is not a document. It is an operating system.

Article 39(e) of the Union Customs Code requires appropriate safety and security standards. Article 28 of Implementing Regulation (EU) 2015/2447 translates that requirement into practical conditions covering premises, cargo, people, partners and security responsibilities.

01
ARTICLE 28(1)(a)

Building and premises security

Buildings used for activities covered by the AEOS authorisation must provide protection against unlawful intrusion and be constructed using materials resistant to unlawful entry.

Possible evidence Building security assessment Perimeter protection Maintenance and inspection records
02
ARTICLE 28(1)(b)

Access control and restricted areas

Appropriate measures must prevent unauthorised access to offices, shipping areas, loading docks, cargo areas and other relevant operational locations.

Possible evidence Visitor identification Restricted-area permissions Access and incident logs
03
ARTICLE 28(1)(c)

Cargo integrity and goods handling

Goods-handling measures must protect against unauthorised introduction or substitution of goods, improper handling and tampering with cargo units.

Possible evidence Loading and unloading procedures Seal and cargo-unit checks Discrepancy reporting
04
ARTICLE 28(1)(d)

Business partner security

The operator must be able to identify its business partners and use appropriate contractual arrangements or other measures to ensure security within the parts of the international supply chain for which those partners are responsible.

Possible evidence Partner identification procedures Security clauses or declarations Risk-based partner reviews
05
ARTICLE 28(1)(e)

Personnel security screening

To the extent permitted by national law, the operator must screen prospective employees in security-sensitive roles and perform periodic background checks on existing personnel in such roles, where warranted by the circumstances.

Possible evidence Security-sensitive role mapping Lawful screening procedures Confidential verification records
06
ARTICLE 28(1)(f)

External service provider security

Appropriate security procedures must apply to contracted external service providers. The measures should reflect the services performed and the risks they introduce into the operator’s activities.

Possible evidence Contractor access procedures Service-provider security instructions Compliance verification records
07
ARTICLE 28(1)(g)

Security awareness and training

Staff with security-related responsibilities must regularly participate in programmes that raise awareness of relevant safety and security risks.

Possible evidence Security awareness programme Training participation records Incident response exercises
08
ARTICLE 28(1)(h)

Designated security contact person

The applicant must appoint a contact person competent to address safety and security matters, including communication and coordination on relevant issues.

Possible evidence Named responsible contact Defined responsibilities Escalation and reporting channels
SECURITY CONTROL FRAMEWORK ILLUSTRATIVE MODEL
OPERATIONAL SECURITY

Protect every critical handover.

AEOS security measures should operate throughout the relevant international supply chain. A documented procedure has limited value if it is not followed in everyday operations.

01 FACILITY Secure premises
02 ACCESS Authorised people
03 CARGO Protected goods
04 PARTNERS Secured handover

Personnel screening, contractor controls, awareness programmes and a designated security contact support the entire process.

PRACTICAL EXAMPLE

A secure warehouse. But an uncontrolled loading dock.

An exporter has perimeter fencing, controlled employee access and warehouse surveillance. However, visiting drivers can enter the loading area without verification, and cargo-unit inspections are not recorded.

These weaknesses may affect compliance with Article 28(1)(b) and (c), even if the warehouse itself is well protected. The operator should assess the risks, implement appropriate controls and retain evidence that the procedures are actually followed.

01 / IDENTIFY Uncontrolled driver access Restricted loading area exposed
02 / CORRECT Introduce access and cargo checks Measures proportionate to operational risks
03 / VERIFY Record and test the controls Evidence of consistent implementation
ARTICLE 28(2)–(3) / IMPLEMENTING REGULATION

Can existing security certifications help?

Yes. Relevant security and safety certificates may be taken into account during the AEOS assessment. Where the applicable legal conditions are satisfied, equivalent requirements may be recognised to the extent of their established equivalence.

Certain regulated-agent and known-consignor statuses may also be relevant for the sites and operations they cover. Such recognition does not automatically establish compliance with every AEOS requirement.

Important distinction

Holding an ISO or other security certification does not automatically confer AEOS authorisation. The competent customs authority must assess the applicable legal conditions and the scope of any recognised equivalence.

Explore AEO Criteria
02 / AEOS BENEFITS & FACILITATIONS

Security recognition. Operational advantages.

AEOS authorisation provides more favourable treatment in safety and security-related customs controls, specific advance-notification benefits and access to international mutual recognition arrangements where applicable. Each benefit operates within defined legal and procedural limits.

01 / RISK TREATMENT ↓

Fewer security-related controls

AEOS holders benefit from fewer physical and document-based controls concerning safety and security compared with operators without equivalent status. Risk-based controls remain possible.

ARTICLE 24(1) / DELEGATED REGULATION
02 / EARLY INFORMATION ↗

Notification before arrival

Under the conditions of Article 24(2), an AEOS may receive advance notification when goods are selected for physical control by the customs office of first entry, before their arrival in the EU customs territory.

ARTICLE 24(2) / DELEGATED REGULATION
03 / CONTROL PRIORITY 01

Priority when selected for control

When an AEO consignment is selected for physical or document-based customs control, the applicable rules provide for priority treatment. This does not guarantee immediate release or a fixed inspection time.

ARTICLE 24(4) / DELEGATED REGULATION
04 / CONTROL LOCATION ◎

Request another inspection location

An AEO may request that customs controls take place somewhere other than the normal presentation location. The request does not create an unconditional right to choose the inspection site.

ARTICLE 24(4) / DELEGATED REGULATION
ARTICLE 24(2) / SAFETY & SECURITY

Know about selected controls before goods arrive.

For qualifying entry declarations, an AEOS can receive notification from the customs office of first entry when a consignment has been selected for physical control.

This can help the operator prepare for an examination and coordinate the arrival process. The notification may be withheld if providing it would jeopardise the control or its results.

Not every inspection is notified in advance.

Article 24(5) excludes controls decided on the basis of a temporary storage or customs declaration after the goods have been presented. Other statutory conditions also apply.

PRE-ARRIVAL CONTROL WORKFLOW AEOS / EU
01
ENTRY INFORMATION Qualifying declaration lodged
02
CUSTOMS RISK ASSESSMENT Consignment selected for physical control
03
WHERE LEGALLY PERMITTED AEOS receives prior notification
04
ARRIVAL & EXAMINATION Customs control proceeds
ADVANCE NOTICE DOES NOT REMOVE CUSTOMS CONTROL
ARTICLE 23 / DELEGATED REGULATION

Facilitations for pre-departure declarations.

AEOS also benefits from specific rules concerning pre-departure declarations. Where an AEOS lodges a qualifying customs declaration or re-export declaration on its own behalf, Article 23 provides that no additional particulars beyond those contained in that declaration are required for the pre-departure declaration.

The provision also covers an AEOS lodging such a declaration on behalf of another AEOS, subject to its conditions. It does not eliminate the applicable obligation to provide pre-departure information.

AEOS-SPECIFIC FACILITATION One qualifying declaration

No additional pre-departure particulars required beyond those stated in the qualifying customs or re-export declaration.

SUBJECT TO ARTICLE 23 CONDITIONS
INTERNATIONAL AEO COOPERATION

Mutual recognition beyond the European Union.

Under applicable Mutual Recognition Agreements (MRAs), the EU and partner customs administrations recognise qualifying trusted-operator status and provide agreed reciprocal benefits.

INTERNATIONAL TRUST NETWORK MRA
EU AEOS EU AUTHORISATION
↔ MUTUAL RECOGNITION
PARTNER AEO RECOGNISED PROGRAMME
BENEFITS DEPEND ON EACH AGREEMENT

What can mutual recognition provide?

01

Recognition of qualifying trusted-operator status by a partner customs administration.

02

Fewer safety and security controls where the agreement provides for that benefit.

03

Recognition of trusted business partners or other operational benefits specified by the relevant arrangement.

AEOS status alone does not guarantee automatic access to every MRA benefit. Applicable data exchange, consent, identification and partner-country procedures must also be considered.

EU mutual recognition partners

The European Commission identifies implemented arrangements with Canada, China, Japan, Moldova, Norway, Switzerland, the United States and the United Kingdom. The applicable benefits and arrangements must be checked individually.

Check the European Commission’s current MRA list
ARTICLES 24–25 / DELEGATED REGULATION

More favourable treatment does not mean exemption.

Customs authorities may still examine AEOS consignments, including where specific threats or other EU legal control obligations require action. Article 25 limits the application of favourable treatment in these cases.

AEOS also does not automatically provide the customs simplifications associated with AEOC. An operator seeking both sets of benefits should consider the requirements for holding both authorisations.

AEOS DOES PROVIDE Security-focused facilitations

Subject to the relevant legal and operational conditions.

AEOS DOES NOT PROVIDE Automatic AEOC simplifications

Separate authorisations and specific criteria may still be necessary.

03 / AEOS AUTHORISATION PROCESS

From security assessment to AEOS authorisation.

Obtaining AEOS status requires more than submitting an application. Customs authorities assess the applicant’s compliance history, record management, financial solvency and actual security arrangements across the relevant international supply chain.

THE APPLICATION JOURNEY

Six stages from preparation to decision.

The sequence below illustrates the main stages. The competent authority determines the detailed examination and may request additional information.

01
PRE-APPLICATION

Map the business and security risks

Identify relevant premises, supply-chain roles, goods movements, outsourced activities and security-sensitive operations. Compare existing controls with Article 28 requirements.

PREPARE
02
SELF-ASSESSMENT

Complete the AEO questionnaire

Prepare the Self-Assessment Questionnaire (SAQ), including the relevant security and safety sections. Describe actual procedures, responsibilities, locations and controls, rather than relying on generic policy statements.

DOCUMENT
03
ELECTRONIC SUBMISSION

Submit the AEOS application

File the application through the electronic route designated for the competent Member State. Provide the completed SAQ and the information required by the applicable procedure.

SUBMIT
04
CUSTOMS ASSESSMENT

Demonstrate security controls in practice

Customs examines the applicant’s information and verifies relevant procedures. The assessment can include visits to premises, interviews, examination of records and observation of operational controls.

VERIFY
05
FINDINGS AND FOLLOW-UP

Address identified weaknesses

Where deficiencies are identified, customs may request clarification or additional evidence. The applicant may need to implement corrective measures before the applicable criteria can be considered fulfilled.

RESPOND
06
AUTHORISATION DECISION

Receive the decision and maintain compliance

The competent customs authority grants or refuses authorisation under the applicable rules. Following approval, the operator must maintain the relevant criteria and cooperate with ongoing customs monitoring.

DECISION
ARTICLE 30 / IMPLEMENTING REGULATION

One EU framework. Competent national authorities.

AEO applications and authorisations are managed through the EU electronic AEO framework. Applicants must follow the submission route designated for their competent Member State.

The European Commission directs applicants in France, Germany, Spain and Poland to country-specific application links. For other Member States, it provides access through the EU Trader Portal.

Before submitting

Check the competent customs authority, EORI registration, access permissions and any applicable national submission instructions. Representatives require the appropriate authorisation or delegation.

Check the official AEO application routes
AEOS APPLICATION WORKFLOW EU / AEO
01 / OPERATOR EORI + Access Rights Competent Member State identified
02 / APPLICATION AEOS Request + SAQ Submitted through the designated route
03 / CUSTOMS AUTHORITY Eligibility + Security Audit Documentary and operational assessment
04 / DECISION Grant or Refusal Monitoring follows any authorisation
APPLICATION ACCEPTANCE AND AUTHORISATION ARE DIFFERENT PROCEDURAL STAGES
THE CUSTOMS SECURITY AUDIT

What does customs actually examine?

An AEOS audit tests whether the security arrangements described by the applicant exist, are appropriate to its operations and are effectively implemented.

01 / PREMISES

Physical protection

Building protection, restricted areas, visitor access, loading docks and security of relevant facilities.

02 / GOODS

Cargo integrity

Handling, loading, unloading, cargo-unit protection, discrepancies and controls against unauthorised interference.

03 / PEOPLE

Personnel and training

Security-sensitive responsibilities, lawful personnel checks, awareness programmes and staff understanding.

04 / PARTNERS

Supply-chain relationships

Identification of business partners, appropriate security arrangements and relevant external service providers.

05 / GOVERNANCE

Security responsibilities

Designated contact person, escalation procedures, security risk assessment and responses to identified weaknesses.

06 / SHARED AEO CRITERIA

Customs compliance and controls

Compliance history, records management and financial solvency under Article 39(a)–(c) UCC.

AUDIT PREPARATION

A useful evidence file. Not a universal document list.

The following documents are examples of evidence that may help demonstrate compliance. They are not an exhaustive or universally mandatory set of attachments.

Customs may require different evidence depending on the operator’s size, role, facilities, business model and security risks.

Review the eight security conditions
ILLUSTRATIVE EVIDENCE CHECKLIST 8 AREAS
  • 01 Site plans and restricted-area maps
  • 02 Building and access-control procedures
  • 03 Cargo handling and inspection records
  • 04 Business-partner identification measures
  • 05 External contractor security arrangements
  • 06 Lawful personnel screening procedures
  • 07 Security training and awareness records
  • 08 Security contact and escalation procedures
The SAQ and the formal application are separate from this illustrative evidence list.
DECISION-MAKING PERIOD

How long does an AEOS application take?

The ordinary time limit starts when the application has been accepted, not simply when the applicant begins preparing or submitting its documents.

ORDINARY DECISION PERIOD 120 days

General period for taking a customs decision under Article 22(3) UCC, calculated from acceptance.

SPECIFIC AEO EXTENSION +60 days

Possible extension where customs cannot complete the AEO assessment within the ordinary period, under Article 28(1) of the Delegated Regulation.

Other extensions or suspensions of the applicable time limits may be permitted in specific circumstances. The figures above are not a guaranteed completion date.

04 / AUTHORISATION STRATEGY

AEOS vs AEOC. Two purposes. One AEO framework.

The Union Customs Code distinguishes customs simplifications from safety and security facilitations. Understanding this distinction helps businesses select the authorisation appropriate to their operations and assess whether a combined authorisation is useful.

AUTHORISATION COMPARISON

What changes between AEOC and AEOS?

UCC ARTICLES 38–39
Assessment area AEOC Customs Simplifications AEOS Security and Safety
Legal basis Article 38(2)(a) UCC Article 38(2)(b) UCC
Primary purpose Customs simplifications Supply-chain safety and security
Shared AEO criteria Article 39(a)–(c) Article 39(a)–(c)
Additional criterion Article 39(d): practical competence or professional qualifications Article 39(e): appropriate security and safety standards
Favourable control treatment Customs controls other than safety and security Safety and security-related customs controls
Customs simplifications Access to applicable facilitations; separate approvals may be required No automatic AEOC-based entitlement
International mutual recognition Not the AEOS security status ordinarily covered by AEO MRAs Potential benefits under applicable mutual recognition arrangements
Ongoing obligation Maintain applicable authorisation criteria Maintain applicable criteria and operational security controls

The comparison summarises the principal differences. Individual customs simplifications, controls and mutual recognition benefits remain subject to their specific legal conditions.

ARTICLE 38(3) UCC / ARTICLE 33 IA

Need both? One combined authorisation.

An economic operator may hold both AEOC and AEOS. Where the applicant qualifies for both types, Article 33 of Implementing Regulation (EU) 2015/2447 provides for one combined authorisation.

This requires the shared criteria under Article 39(a)–(c), the customs competence criterion under Article 39(d) and the safety and security criterion under Article 39(e).

Combined does not mean unrestricted.

A combined authorisation brings together the relevant AEO benefits. It does not automatically grant every customs procedure, simplified declaration or other authorisation requiring separate approval.

Explore Combined AEOC + AEOS
COMBINED AEO FRAMEWORK EU / AUTHORISATION
CUSTOMS AEOC ARTICLE 39(d)
+
SECURITY AEOS ARTICLE 39(e)
COMBINED AUTHORISATION AEOC + AEOS SHARED CRITERIA + BOTH SPECIFIC CRITERIA
ONE COMBINED AUTHORISATION UNDER ARTICLE 33
BUSINESS APPLICATIONS

Which AEO route fits your operations?

The examples below illustrate how operational priorities can influence the choice. They do not determine eligibility on their own.

01 / IMPORTER
AEOC FOCUS

High-volume customs operations

An importer manages frequent declarations and wants access to customs simplifications under the applicable conditions.

02 / LOGISTICS OPERATOR
AEOS FOCUS

Security-sensitive cargo handling

A logistics operator handles international shipments and prioritises controlled premises, cargo integrity and security recognition.

03 / INTEGRATED OPERATOR
COMBINED FOCUS

Customs efficiency and security

An exporter manages substantial customs activity alongside international logistics operations and seeks both sets of AEO facilitations.

PRACTICAL SELECTION GUIDE

Start with the benefit. Then assess the criteria.

AEO selection should be based on the operator’s actual customs activities, security responsibilities and the benefits it intends to use.

STEP 01 What is the main operational objective?
CUSTOMS SIMPLIFICATIONS Assess AEOC AEOC requirements ↗
SUPPLY-CHAIN SECURITY Assess AEOS AEOS requirements ↗
BOTH OBJECTIVES Assess combined AEO Combined authorisation ↗
STEP 02

Verify the relevant Article 39 criteria, the applicant’s actual activities and the conditions of the specific benefits sought.

AFTER AUTHORISATION

AEOS security is a continuing obligation.

Authorisation is subject to monitoring. Changes in business operations or security arrangements can affect continued compliance and must be managed appropriately.

01

Maintain physical controls

Keep premises, access restrictions and cargo-protection procedures appropriate to current operations.

02

Review business partners

Reassess relevant partner and contractor security arrangements when risks or business relationships change.

03

Train and inform personnel

Maintain security awareness, responsibilities and procedures for reporting relevant incidents.

04

Notify relevant changes

Inform customs without delay of factors arising after authorisation that may influence its continuation or content, as required by EU law.

AUTHORISATION RISK What if security requirements are no longer met?

Customs may take measures affecting AEOS authorisation under the applicable rules. Where both authorisations are held, failure of the specific security criterion does not automatically invalidate AEOC if its conditions remain satisfied.

Suspension and Revocation
05 / AEOS KNOWLEDGE CENTER

AEOS explained. Answers that matter.

From eligibility and security audits to mutual recognition and continuing obligations, these frequently asked questions address practical issues businesses face when applying for and maintaining AEOS status under the Union Customs Code.

FREQUENTLY ASKED QUESTIONS

Clear answers to complex customs questions.

AEOS is a European Union customs authorisation focused on safety and security. Its benefits are governed by specific rules and should not be confused with automatic customs simplifications.

AEOS / KEY PRINCIPLE Trusted does not mean exempt.

AEOS recognition supports risk-based customs treatment. Authorities retain their powers to carry out controls.

SECURITY STATUS / CONTINUING COMPLIANCE
01 What does AEOS stand for?

AEOS refers to Authorised Economic Operator status for security and safety. It is the type of AEO authorisation established by Article 38(2)(b) of the Union Customs Code and is intended for operators meeting the applicable security and safety standards.

02 Is AEOS mandatory for importing or exporting?

No. AEOS is a voluntary customs authorisation. Businesses can generally import and export without AEOS status, provided they comply with all applicable customs and other regulatory requirements.

03 Can small and medium-sized businesses obtain AEOS?

Yes. AEOS is not restricted to large companies. Customs authorities take account of the operator’s specific characteristics, including its size and operational activities, when assessing the relevant criteria. Small businesses must nevertheless demonstrate that the applicable requirements are fulfilled.

04 Does AEOS eliminate customs inspections?

No. AEOS provides more favourable treatment concerning safety and security-related controls, subject to the relevant rules. Customs may still select goods for documentary or physical examination, particularly where risks or other legal obligations require controls.

05 Does AEOS automatically grant customs simplifications?

No. AEOS is the security and safety authorisation. AEOC concerns customs simplifications. Specific simplifications may also require separate authorisations and additional conditions. An operator seeking both categories of AEO benefits can apply for both authorisations.

06 Is AEOS recognised throughout the European Union?

Yes. Under Article 38(4) UCC, AEO status is recognised by customs authorities in all Member States. The application of individual benefits remains subject to the relevant legal and operational conditions.

07 Does AEOS provide benefits outside the EU?

Potentially. Mutual Recognition Agreements can provide reciprocal benefits between the EU and partner customs administrations. Eligibility, data exchange and the precise facilitations depend on each agreement and its implementation. Recognition is not universal.

08 How long is an AEOS authorisation valid?

An AEO authorisation is not issued for a fixed period of validity. However, the operator must continue to satisfy the relevant criteria. Customs authorities monitor compliance, and authorisation may be suspended or revoked under the applicable rules.

09 What happens when an AEOS company changes its operations?

Under Article 23(2) UCC, the holder must inform customs without delay of factors arising after the decision that may influence its continuation or content. Relevant changes may include premises, security procedures, organisational arrangements or supply-chain activities.

10 Can a company hold AEOC and AEOS together?

Yes. An operator meeting the common AEO criteria and both additional criteria may obtain a combined authorisation under Article 33 of Implementing Regulation (EU) 2015/2447.

Read the combined AEO guide
COMMON MISCONCEPTIONS

Four assumptions that create compliance risks.

Understanding what AEOS does not guarantee is as important as understanding its benefits.

01 / CONTROLS
INCORRECT

AEOS shipments are never inspected.

CORRECT

Risk-based controls remain possible, including safety and security examinations.

02 / AUTHORISATIONS
INCORRECT

AEOS automatically includes every AEOC benefit.

CORRECT

The two authorisations have different purposes and additional criteria.

03 / INTERNATIONAL
INCORRECT

AEOS has identical benefits in every country.

CORRECT

International benefits depend on applicable mutual recognition arrangements.

04 / MONITORING
INCORRECT

Security compliance matters only during the audit.

CORRECT

AEOS requires continuing compliance and cooperation with customs monitoring.

CUSTOMS EXPLORER / EU COMPLIANCE

Security is not a certificate. It is an operating standard.

AEOS authorisation recognises an operator’s security and safety arrangements within the EU customs framework. Its long-term value depends on maintaining those arrangements as operations evolve.

Explore AEO Monitoring