Customs Explorer
⌕

Customs Explorer

EUDR geolocation data

EU DEFORESTATION REGULATION TRACEABILITY & GEOLOCATION

EUDR Geolocation Data.

From production plots to verifiable supply chains.

The EU Deforestation Regulation requires geographical information identifying the plots of land where relevant commodities were produced, subject to the applicable legal provisions. Coordinates and polygon data are fundamental elements of the due diligence process.

Learn how production locations are identified, how geolocation information supports traceability and why accurate coordinates alone do not establish that a product is deforestation-free.

Plot coordinates
Polygon mapping
Supply chain traceability
GEOLOCATION / TRACEABILITY ILLUSTRATIVE DATA VIEW
PRODUCTION ORIGIN Plot identification
DATA MODEL
LAND PARCEL VIEW GEO / 001
PLOT / A-001
BOUNDARY GEOMETRY POLYGON / ILLUSTRATIVE
GEOMETRY Plot boundary
DATA TYPE Geospatial coordinates

Geolocation identifies the production location. Compliance also requires the applicable due diligence and legality assessments.

LEGAL FRAMEWORK Regulation (EU) 2023/1115, as amended
CORE REQUIREMENTS Articles 2, 9 & 10
KEY DATA Coordinates · Polygons · Production origin
02 / GEOLOCATION REQUIREMENTS

Identify the land. Understand the data requirements.

Under Article 9 of the EU Deforestation Regulation, the required information includes the geolocation of all plots of land where the relevant commodities contained in, or used to make, the relevant product were produced.

The required geographical representation depends on the characteristics of the production plot. The regulation distinguishes plots exceeding four hectares from other plots, while establishing a specific identification rule for cattle.

ARTICLE 9(1)(d) THE CORE GEOLOCATION RULE

Every relevant production plot must be identifiable.

The information required under the applicable due diligence framework includes geographical data identifying the plots of land where the relevant commodities were produced.

For relevant commodities produced on plots exceeding four hectares, other than cattle, geolocation must be provided using polygons with sufficient latitude and longitude points to describe each plot’s perimeter.

LEGAL SOURCE Regulation (EU) 2023/1115
RELEVANT PROVISION Article 9(1)(d)
COORDINATE PRECISION At least six decimal digits
Read the regulation
03 / GEOGRAPHICAL REPRESENTATION

Point coordinates versus plot polygons.

Geolocation can identify a production location through latitude and longitude coordinates. For plots exceeding the regulatory area threshold, the EUDR requires a perimeter represented by a polygon.

01 / GEOLOCATION POINT POINT REPRESENTATION
GEOLOCATION POINT LATITUDE / LONGITUDE
POSITION Latitude + longitude

Point-based geolocation

A geographical point records a location using latitude and longitude coordinates.

For plots not exceeding four hectares, the EUDR does not impose the specific polygon requirement applicable to larger plots.

REGULATORY DISTINCTION Polygon not mandated solely by plot size
02 / PLOT PERIMETER POLYGON REPRESENTATION
PLOT PERIMETER
BOUNDARY Multiple coordinate points

Polygon-based geolocation

A polygon represents the perimeter of a plot through a sequence of geographical coordinate points.

Under Article 9(1)(d), polygons are required for plots exceeding four hectares when producing relevant commodities other than cattle.

REGULATORY DISTINCTION Mandatory for applicable plots over 4 ha

Important: a point is not a substitute for a polygon when the polygon requirement applies. Conversely, the four-hectare threshold does not remove the obligation to identify smaller production plots.

04 / THE FOUR-HECTARE RULE

Four hectares. A format threshold, not an exemption.

The distinction applies to individual plots of land. It should not be confused with the total area of an operator’s entire agricultural business.

UP TO AND INCLUDING 4 HA
≤ 4 hectares

Geolocation required

The plot must be geographically identified. The specific polygon obligation triggered by an area exceeding four hectares does not apply solely on this basis.

DATA APPROACH Geolocation coordinates
MORE THAN 4 HA
> 4 hectares

Polygon required

For relevant commodities other than cattle, the plot’s perimeter must be described using a polygon with sufficient latitude and longitude points.

DATA APPROACH Polygon boundary geometry
ILLUSTRATIVE EXAMPLE

One producer, three plots: 2 ha + 3 ha + 6 ha.

Each relevant production plot must be identified. The 6-hectare plot requires polygon-based geolocation under the applicable rule. The smaller plots are not exempt from geolocation simply because they do not exceed four hectares.

05 / SPECIAL CASE — CATTLE

Cattle traceability. Identify establishments.

The EUDR contains a distinct geographical information requirement for relevant products containing or made using cattle.

The relevant location is not simply a crop-production plot.

For relevant products that contain or have been made using cattle, Article 9(1)(d) requires the geolocation of all establishments where the cattle were kept.

This distinction matters for supply chains involving breeding, rearing and other establishments through which the relevant animals passed.

The plot-size polygon rule for other commodities must not be mechanically applied to cattle establishment information.

CATTLE / LOCATION HISTORY ILLUSTRATIVE CHAIN
01
Establishment A Relevant animal location
02
Establishment B Subsequent holding location
03
Relevant product Traceable animal origin
06 / MULTIPLE PRODUCTION LOCATIONS

Multiple plots. One product supply chain.

A relevant product may contain commodities produced across several plots. The information required under Article 9 must account for the applicable production locations, not merely a supplier’s registered office or warehouse.

PRODUCTION ORIGIN MODEL ILLUSTRATIVE
01 PLOT A Production location
02 PLOT B Production location
03 PLOT C Production location
COMBINED PRODUCT Relevant commodity supply Geolocation records must cover the applicable production plots.

Supplier identity is not production geolocation.

A supplier’s address, a processing facility or a storage warehouse does not automatically identify the plots where the commodity was produced.

The responsible business must obtain the relevant production-origin information and maintain the relationship between the commodity, its source locations and the applicable due diligence records.

  • Identify every applicable production plot.
  • Use the appropriate geometry for each plot.
  • Maintain links between products and source locations.
  • Investigate incomplete or contradictory location data.
07 / GEOLOCATION DATA QUALITY

Valid coordinates. Reliable production origin.

Geolocation quality is more than a correctly formatted latitude and longitude. The information must identify the relevant production location and support a credible connection between the land, the commodity and the supply chain.

Technical validation helps identify errors before geographical information is used in due diligence. It does not replace the substantive risk assessment required under the applicable EUDR provisions.

01
TECHNICAL VALIDITY

Is the geometry usable?

Check coordinate structure, numerical ranges, polygon closure, topology and the geographical reference system.

OUTPUT Structurally valid geographical data
02
ORIGIN RELIABILITY

Is it the correct location?

Establish whether the mapped area corresponds to the actual production plot and whether the supplier’s evidence supports that relationship.

OUTPUT Evidence-linked production origin
03
REGULATORY ASSESSMENT

Does the product meet EUDR rules?

Evaluate the applicable deforestation, legality and due diligence requirements, taking account of the product, operator and relevant legal provisions.

OUTPUT Documented compliance assessment

Geometrically valid does not mean EUDR-compliant. A perfectly formed polygon can still identify the wrong farm, omit a production area or describe land associated with a substantive compliance risk.

GEOLOCATION / DATA QUALITY LAB ILLUSTRATIVE VALIDATION VIEW
GEOSPATIAL DATA INSPECTION

A polygon can look right. Its data can still be wrong.

These simplified illustrations show common geometry problems that can be identified through GIS validation.

EXAMPLE A VALID GEOMETRY
PLOT A

Consistent boundary

A closed, non-self-intersecting perimeter suitable for further geographical checks.

EXAMPLE B SELF-INTERSECTION
CROSSING EDGES

Invalid topology

Intersecting edges can make the intended plot boundary ambiguous and require correction.

EXAMPLE C LOCATION MISMATCH
ACTUAL PLOT SUBMITTED DATA

Wrong production location

A technically valid polygon may still describe a different area from the real source plot.

Illustrative geometry only. These are not actual land parcels, satellite observations or results from an official EUDR validation system.

08 / TECHNICAL CONTROL FRAMEWORK

Six checks before using geolocation data.

A structured internal validation process can reduce avoidable errors. The following checks are recommended technical controls, not a separate statutory checklist prescribed word-for-word by the EUDR.

01 / COORDINATES

Coordinate format

Confirm the expected latitude and longitude structure, numeric precision and acceptable value ranges.

EXAMPLE CHECK Latitude −90 to +90; longitude −180 to +180
02 / REFERENCE SYSTEM

Geodetic consistency

Confirm that source coordinates use the expected geographic reference system or have been converted correctly before submission.

EXAMPLE CHECK WGS84 geographic coordinates
03 / TOPOLOGY

Polygon integrity

Detect self-intersections, malformed boundaries, duplicate vertices and unintended geometry defects.

EXAMPLE CHECK Valid closed perimeter
04 / COVERAGE

Production area coverage

Compare mapped boundaries with supporting production records to identify missing plots, incomplete boundaries or incorrectly assigned land.

EXAMPLE CHECK Plot register versus mapped geometry
05 / CONSISTENCY

Supplier-to-plot mapping

Verify that geographical records are associated with the correct producer, commodity, relevant product and production period.

EXAMPLE CHECK Product and origin record reconciliation
06 / EVIDENCE

Supporting documentation

Review available maps, production records, supplier evidence and other appropriate material supporting the claimed origin.

EXAMPLE CHECK Evidence and traceability review
09 / COMMON DATA ERRORS

Small data mistakes. Significant traceability consequences.

Errors can originate from manual entry, spreadsheets, GPS collection, mapping software or data exchange between suppliers and operators.

01

Latitude and longitude reversed

Swapping the coordinate order may place the reported location in a different geographical area, even where both numbers fall within valid numerical ranges.

POSITION
02

Incorrect decimal separator

Locale-dependent number formatting, truncated decimal values or spreadsheet conversions can alter the recorded position.

FORMAT
03

Coordinate system mismatch

Projected coordinates entered as geographical coordinates, or an incorrect transformation between reference systems, can displace the recorded plot.

GEODESY
04

Incomplete polygon boundaries

Missing vertices, incorrectly ordered points or omitted sections may produce an inaccurate representation of the land.

GEOMETRY
05

Supplier address used as plot location

The registered address of a supplier, collection centre or warehouse is not necessarily the place where the relevant commodity was produced.

ORIGIN
06

Incomplete production-location coverage

A batch assembled from several production plots may be associated with only one of them, leaving relevant origins unrecorded.

TRACEABILITY
10 / GEOSPATIAL EVIDENCE

Satellite imagery. Useful evidence, not automatic proof.

Earth observation data and historical imagery can help assess land-cover changes and investigate potential deforestation. Their usefulness depends on resolution, dates, interpretation and the reliability of the underlying production-location data.

01

Historical comparison

Compare observations from relevant periods to identify potential land-cover changes requiring further investigation.

02

Spatial overlay

Compare production-plot geometry with appropriate land-cover datasets and other available geographical evidence.

03

Evidence interpretation

Evaluate uncertainty, image resolution, seasonal effects, data quality and the legal definitions relevant to EUDR.

Legal distinction: the EUDR deforestation-free assessment concerns the relevant legal definitions and the 31 December 2020 cut-off date. A satellite image alone does not determine whether all regulatory conditions are met.

11 / INTERNAL VALIDATION WORKFLOW

From raw coordinates to review-ready evidence.

A practical sequence for preparing geolocation information before it is used in the applicable EUDR due diligence process.

01 Collect Receive plot data and source records
02 Standardise Check coordinate formats and reference systems
03 Validate Inspect geometry and geographical consistency
04 Reconcile Match plots to producers and products
05 Assess Review relevant risk and supporting evidence
06 Document Retain the applicable records and decisions
12 / DEFORESTATION RISK ASSESSMENT

Locate the plot. Investigate its land-use history.

Geolocation enables operators to connect relevant commodities to their production areas. Those locations can then be examined against historical land-cover information, supporting documents and the applicable EUDR requirements.

The objective is not simply to detect changes in satellite imagery. It is to establish whether the relevant product satisfies the legal definition of deforestation-free and whether the other applicable compliance conditions have been met.

REGULATORY REFERENCE POINT ARTICLE 2 / ARTICLE 3
EUDR DEFORESTATION CUT-OFF
31 DEC 2020

Production land must satisfy the applicable post-cut-off rules.

For relevant products containing or made using commodities other than cattle, the deforestation-free definition concerns land that has not been subject to deforestation after 31 December 2020.

For relevant products containing or made using wood, the regulation additionally addresses wood harvested without inducing forest degradation after that date.

Cattle-related products have specific conditions under the EUDR definition and must be assessed accordingly.

DEFORESTATION Legal definition under Article 2
FOREST DEGRADATION Additional wood-related requirement
PRODUCTION LEGALITY Separate condition under Article 3

The cut-off date is not the date on which every land-cover change becomes unlawful. Classification depends on the legal definitions and the relevant factual evidence.

13 / HISTORICAL LAND-COVER ANALYSIS

One production plot. Different moments in time.

Historical imagery can support the investigation of changes affecting a production area. The comparison must be interpreted in light of the legal definitions, observation dates and data limitations.

LAND-COVER COMPARISON CONCEPTUAL VISUALISATION
REFERENCE PERIOD HISTORICAL OBSERVATION
ILLUSTRATIVE FOREST
DATA INTERPRETATION

Historical evidence suggests forest cover within the mapped area.

LATER PERIOD SUBSEQUENT OBSERVATION
CHANGE DETECTED
DATA INTERPRETATION

A potential land-cover change requires further verification and legal assessment.

IMPORTANT INTERPRETATION RULE

Detected change is a signal for investigation, not an automatic legal conclusion.

Remote sensing may indicate a change in vegetation or land cover. Determining whether it constitutes deforestation or forest degradation under EUDR requires the relevant legal and factual analysis.

14 / REGULATORY DEFINITIONS

Three different tests. One compliance framework.

The EUDR’s market-access conditions must not be reduced to a single satellite-based deforestation check.

01 / DEFORESTATION-FREE

Land-use conditions

Determine whether the product satisfies the applicable deforestation-free definition, including the post-2020 requirements and any commodity-specific conditions.

PRIMARY REFERENCE Articles 2 and 3
02 / PRODUCTION LEGALITY

Relevant legislation

Assess whether the commodity was produced in accordance with the relevant legislation of the country of production, as defined by the regulation.

PRIMARY REFERENCE Articles 2 and 3
03 / DUE DILIGENCE

Applicable obligations

Establish which due diligence and declaration requirements apply to the economic operator and whether the necessary information and assessments have been completed.

PRIMARY REFERENCE Articles 4, 8–12, as applicable
15 / RISK INDICATORS

What should trigger further investigation?

The following are practical examples of circumstances that may require additional checks. Their significance depends on the available evidence and the applicable risk-assessment framework.

01

Post-cut-off land change

Geospatial evidence suggests forest conversion or another relevant land-cover change after 31 December 2020.

02

Contradictory source records

Supplier declarations, maps and production documents identify inconsistent locations.

03

Incomplete plot coverage

Available geographical information does not account for all relevant production locations.

04

Unexplained supply volumes

Reported quantities appear inconsistent with the declared production areas or available records.

05

Uncertain land-use history

Historical information is incomplete, ambiguous or insufficient to support the required conclusion.

06

Legality concerns

Evidence raises questions concerning relevant land rights, production permissions or other applicable legal requirements.

16 / EVIDENCE & RISK MITIGATION

Build a defensible record. Do not rely on a single data source.

The reliability of an EUDR assessment depends on the quality, consistency and relevance of the information supporting it. Where the applicable risk-assessment process identifies concerns, further information or mitigation measures may be needed.

01

Geolocation records

Coordinates or polygons identifying the applicable production locations.

02

Production evidence

Supplier information, production dates and records connecting goods to their geographical origin.

03

Geospatial observations

Appropriate historical imagery, land-cover datasets and geographical analyses.

04

Legality documentation

Relevant records supporting compliance with applicable production-country legislation.

05

Risk assessment

Documented evaluation of the relevant information and identified risks, where required.

06

Mitigation and decisions

Additional verification, corrective information and recorded conclusions, where applicable.

Regulatory basis: Articles 9, 10 and 11 establish the core information, risk assessment and risk mitigation framework for operators subject to those obligations. Simplified regimes and exemptions must be assessed separately under the amended regulation.

17 / OPERATIONAL DECISION PROCESS

From a mapped plot to a documented conclusion.

A conceptual workflow for operators carrying out the applicable EUDR due diligence and risk-assessment obligations.

01

Confirm the production location

Verify that the geographical information identifies the relevant plot or establishment.

ORIGIN
02

Examine relevant historical evidence

Investigate land-use history using appropriate sources and observation periods.

HISTORY
03

Assess the legal criteria

Evaluate deforestation-free conditions and production legality under the applicable rules.

LEGAL TEST
04

Investigate unresolved risks

Obtain additional evidence or apply appropriate mitigation measures where required.

MITIGATION
05

Record the applicable conclusion

Retain the required information, assessments and decisions, and complete the relevant regulatory steps before placing on the market or export.

RECORD
18 / PRACTICAL GEOLOCATION OPERATIONS

From supplier data to operational decisions.

Real supply chains rarely arrive as a perfect collection of coordinates, polygons and supporting documents. Production may involve several plots, commodities may be mixed, and geographical records may be incomplete or inconsistent.

The following scenarios illustrate how businesses can organise their internal controls before relying on geolocation information for applicable EUDR obligations. They are operational examples, not official EU decisions or substitutes for legal assessment.

FIVE PRACTICAL SCENARIOS COMMON DATA & TRACEABILITY CHALLENGES
01 Multiple plots One producer, several locations
02 Mixed commodities Several origins, one product batch
03 Incorrect coordinates Valid format, wrong location
04 Missing polygons Insufficient geographical records
05 Uncertain land history Evidence requiring further review
SCENARIO 01 / MULTIPLE PRODUCTION PLOTS ILLUSTRATIVE CASE
COFFEE SUPPLY CHAIN

One coffee producer. Three separate plots.

A coffee producer supplies beans grown on three distinct plots: 2 hectares, 3 hectares and 6 hectares. The buyer receives one consolidated delivery.

The geographical information must account for the applicable production plots, even when the goods are delivered together and invoiced by a single supplier.

OPERATIONAL QUESTION Does one supplier record adequately identify all production locations?
PRODUCTION ORIGIN REGISTER EXAMPLE DATA
PLOT A 2 ha Geolocation required
PLOT B 3 ha Geolocation required
PLOT C 6 ha Polygon required
CONSOLIDATED DELIVERY Three source plots Each applicable production location must be represented in the records.
RECOMMENDED INTERNAL ACTION

Collect and validate geolocation for each plot, including polygon geometry for the 6-hectare plot. Link the relevant records to the supplied commodity.

KEY LESSON

A consolidated shipment does not eliminate the need to identify its relevant production origins.

SCENARIO 02 / MIXED COMMODITY ORIGINS ILLUSTRATIVE CASE
COCOA PROCESSING

Several origins. One processed batch.

A processor combines cocoa from multiple producers into a single production batch. Some cocoa arrives with complete plot data, while other quantities have incomplete origin records.

Processing and mixing do not automatically resolve missing geographical information. The responsible business must establish which production locations are relevant to the product and its applicable obligations.

OPERATIONAL QUESTION Can the business identify the relevant source plots behind the combined batch?
BATCH TRACEABILITY MODEL CONCEPTUAL
ORIGIN A Plot records available
ORIGIN B Plot records available
ORIGIN C Location data incomplete
PROCESSED BATCH Combined cocoa supply Origin information requires reconciliation before reliance.
RECOMMENDED INTERNAL ACTION

Reconcile source records and obtain missing information. Avoid treating the batch as adequately documented solely because some origins are known.

KEY LESSON

Traceability must address the relevant production origins of the goods, including after mixing.

SCENARIO 03 / INCORRECT GEOLOCATION ILLUSTRATIVE CASE
RUBBER PRODUCTION

A valid polygon. The wrong plantation.

A supplier provides a polygon representing a rubber plantation. The geometry passes technical checks, but comparison with production records indicates that the actual source is a different plantation.

The problem is not polygon structure. It is the relationship between the submitted geographical data and the claimed production origin.

OPERATIONAL QUESTION Is geometrically valid data reliable when it identifies the wrong production location?
LOCATION RECONCILIATION ILLUSTRATIVE
ACTUAL SOURCE SUBMITTED PLOT
VALIDATION RESULT Origin mismatch identified Technical geometry validity does not establish origin accuracy.
RECOMMENDED INTERNAL ACTION

Request corrected geographical records, verify them against supporting production evidence and reassess any conclusions affected by the error.

KEY LESSON

Correct coordinates must identify the correct land. A technically valid file can still be factually wrong.

SCENARIO 04 / MISSING GEOGRAPHICAL DATA ILLUSTRATIVE CASE
PALM OIL SUPPLY CHAIN

Supplier identified. Production plots missing.

A supplier provides its company address, processing-facility location and a general description of its palm oil sourcing region.

However, the required production-plot geolocation has not been supplied. The information identifies commercial entities and facilities, but does not establish the actual production plots.

OPERATIONAL QUESTION Can a processing facility or supplier address replace required production-plot data?
SUPPLIER DATA REVIEW EXAMPLE RECORD
SUPPLIER IDENTITY Available
PROCESSING LOCATION Available
PRODUCTION REGION Broad description
PRODUCTION-PLOT DATA Not provided
RECORD ASSESSMENT Required information incomplete A supplier’s address is not automatically production geolocation.
RECOMMENDED INTERNAL ACTION

Obtain the required plot information and check its completeness before proceeding under the applicable EUDR requirements. Where a polygon is required, a general address or regional description is insufficient.

KEY LESSON

Commercial traceability information and production geolocation serve different purposes.

SCENARIO 05 / UNCERTAIN LAND-USE HISTORY ILLUSTRATIVE CASE
SOYA PRODUCTION

Coordinates available. Historical evidence unclear.

A soya producer supplies complete geographical data, but available historical imagery is inconclusive about the land-cover history of part of the production area.

The uncertainty does not, by itself, prove that deforestation occurred. Equally, it should not automatically be treated as proof that the land satisfies the EUDR criteria.

OPERATIONAL QUESTION What additional evidence is necessary to reach a supported conclusion?
LAND-USE EVIDENCE REVIEW CONCEPTUAL
01
Geolocation data Plot identified
02
Historical imagery Inconclusive observation
03
Supporting records Additional review required
04
Risk conclusion Not yet established
ASSESSMENT STATUS Unresolved evidence gap No automatic compliance or non-compliance conclusion.
RECOMMENDED INTERNAL ACTION

Review additional reliable evidence and apply the relevant risk-assessment and mitigation requirements. Document the basis of the final decision.

KEY LESSON

An absence of conclusive satellite evidence is not equivalent to a positive compliance determination.

19 / DATA ISSUE TRIAGE

Different problems. Different corrective actions.

An internal triage matrix can help separate data-quality defects, missing evidence and potential substantive compliance concerns. The categories below are operational labels, not official EUDR system statuses.

Issue Primary concern Suggested next action
Malformed polygon Technical data quality Correct and revalidate geometry
Wrong plot location Origin reliability Reconcile with source evidence
Missing source plots Incomplete required information Obtain and verify missing locations
Unclear land history Unresolved factual uncertainty Investigate and assess relevant risk
Evidence of prohibited deforestation Potential substantive non-compliance Apply legal requirements; do not treat as cleared

Important: correcting a geographical data error is not the same as mitigating a substantive deforestation risk. The applicable legal consequences depend on the facts and the operator’s obligations.

20 / OPERATIONAL READINESS

Prepare the data. Before it becomes a shipment problem.

A practical internal checklist for businesses gathering geolocation information under the applicable EUDR framework. It is not an official statutory checklist.

01 Identify relevant products

Determine the commodities, products and operator obligations involved.

02 Map the supply chain

Identify the producers and production locations relevant to the goods.

03 Collect geographical data

Obtain the required coordinates, polygons or establishment information.

04 Validate the geometry

Check formats, coordinate systems, boundaries and data integrity.

05 Reconcile origin records

Confirm that the data identifies the actual production sources.

06 Assess relevant risks

Evaluate land-use history, legality and other applicable regulatory criteria.

07 Resolve discrepancies

Request corrections, supporting evidence or further verification where needed.

08 Maintain the audit trail

Retain the required records, assessments and applicable declarations.

OPERATIONAL OBJECTIVE Reliable production-origin data before the relevant EUDR compliance decision.
RELATED CUSTOMS EXPLORER GUIDE

Geolocation problems can become customs-release problems.

Discover how the EUDR framework interacts with import and export procedures, due diligence references and competent-authority controls.

EUDR Customs Controls
21 / FREQUENTLY ASKED QUESTIONS

EUDR geolocation. Questions that matter in practice.

Understanding geolocation requirements means distinguishing the production location itself from the documents, geographical analyses and regulatory obligations associated with it.

01 Is geolocation mandatory for every EUDR product?

Geolocation is a core information requirement under Article 9 of Regulation (EU) 2023/1115 for operators subject to the relevant due diligence obligations.

The precise obligations depend on the product, the operator’s role and the applicable provisions, including amendments and simplified arrangements. It is therefore important to establish the applicable regime before determining which data must be collected and submitted.

02 When is a polygon required instead of a point?

Under Article 9, production plots exceeding four hectares must generally be identified using polygons with sufficient latitude and longitude points to describe the perimeter, where the relevant geolocation requirement applies.

Cattle-related geolocation follows a different approach involving establishments where cattle have been kept. The specific legal requirements should be checked for the commodity and operator concerned.

03 Can a supplier’s registered address replace plot coordinates?

No, not where the applicable provision requires geolocation of the production plot. A company address, warehouse or processing facility does not necessarily identify the land where a commodity was produced.

The required geographical information must correspond to the relevant production location under the applicable legal rules.

04 What if one shipment contains commodities from several plots?

For operators subject to the relevant information requirements, the geographical data must account for the applicable production locations associated with the commodities in the product.

Combining goods into one shipment, invoice or processing batch does not automatically remove the need to identify their relevant origins.

05 Does a valid polygon prove EUDR compliance?

No. A valid polygon demonstrates that the geographical data satisfies certain technical geometry checks.

It does not establish that the polygon identifies the correct production plot, that the product is deforestation-free or that all relevant production-country laws have been respected.

06 Does the EUDR require a particular satellite monitoring service?

The regulation does not establish a single mandatory commercial satellite monitoring provider for all operators.

Appropriate geospatial information can support due diligence and risk assessment, but the legal conclusion must be based on the applicable requirements and the available evidence.

07 What is the significance of 31 December 2020?

It is the cut-off date used in the EUDR deforestation-free definition. The regulation addresses deforestation after that date and, for relevant wood products, the additional forest-degradation condition.

Whether an observed land-cover change falls within these definitions requires an assessment of the relevant facts and legal criteria.

08 What should an operator do when coordinates are incorrect?

The business should identify the source of the error, obtain corrected data, verify the production location and reassess any affected conclusions.

If information has already been used in a regulatory submission, the appropriate correction or follow-up procedure must be assessed under the applicable rules. Changing an internal spreadsheet alone may not resolve a previously submitted error.

09 Can geolocation data be reused for later deliveries?

Previously collected geographical information may remain relevant when it accurately identifies the same applicable production locations.

However, later deliveries still require assessment against the applicable information, traceability and due diligence obligations. Reusing coordinates does not automatically establish compliance for new goods.

10 How long must EUDR information be retained?

The EUDR contains record-retention requirements, including five-year periods for relevant operator information and documentation.

The exact records and retention obligations depend on the applicable provision and economic operator category. Businesses should also assess relevant data-protection requirements.

THE BIGGER PICTURE

Geolocation is not just a point on a map.

It is the geographical foundation for connecting a relevant commodity to its production origin. Reliable coordinates, credible evidence and the applicable legal assessment are all essential to a defensible compliance process.

Back to EUDR Explained