Customs Explorer
⌕

Customs Explorer

CBAM goods

EU CARBON BORDER ADJUSTMENT MECHANISM

CBAM Goods: Which Products Are Covered?

Understand which goods fall within the EU Carbon Border Adjustment Mechanism, how CN codes determine product coverage, and which exclusions and exemptions may affect your imports.

CBAM covers specified goods in six main sectors: cement, electricity, fertilisers, iron and steel, aluminium, and hydrogen. The precise scope is defined by the Combined Nomenclature codes and product descriptions listed in Annex I to Regulation (EU) 2023/956, as amended.

6 Main product sectors
Annex I Legal product coverage
2026 Definitive regime began
PRODUCT SCOPE / EU CBAM ANNEX I
REGULATORY COVERAGE Six principal sectors

Coverage is determined by the applicable legal product codes, not simply by the commercial description of the goods.

Cement Cement and specified related products
Electricity Imported electrical energy
Fertilisers Specified fertiliser products
Iron & Steel Selected materials and downstream goods
Aluminium Selected aluminium products
Hydrogen Hydrogen within the legal scope
HOW TO CHECK COVERAGE From product to CBAM scope
01 Classify the goods Determine the correct CN code
02 Check Annex I Match the code and description
03 Assess exemptions Review origin and applicable rules
01 / PRODUCT COVERAGE

Six sectors. Precisely defined products.

CBAM covers selected goods in six industrial sectors. However, belonging to one of these industries does not automatically mean that every product is covered. The legal scope depends on the specific Combined Nomenclature (CN) codes and descriptions listed in Annex I to the CBAM Regulation.

THE FUNDAMENTAL RULE

The sector tells you where to look. The CN code determines what to check.

A commercial description such as “steel component”, “aluminium product” or “fertiliser” is not sufficient to establish CBAM coverage. The importer must determine the correct tariff classification and compare it with the legally defined product scope.

PRODUCT Technical characteristics
CLASSIFICATION Correct CN code
LEGAL CHECK CBAM Annex I
SECTOR DIRECTORY

Explore the six CBAM sectors.

The examples below illustrate the types of goods included in the current CBAM framework. They do not replace the complete legal list of covered CN codes.

01 METALS
IRON & STEEL

Iron and steel products

CBAM includes a broad selection of iron and steel products, ranging from specified primary and semi-finished materials to certain finished and downstream products.

EXAMPLES OF COVERED PRODUCT TYPES
Specified iron and steel materials Flat-rolled products Bars and rods Tubes and pipes Selected fasteners and structures
ILLUSTRATIVE CN CODES 7208 7304 7318 Coverage depends on the exact Annex I entry.
Classification matters: Not every article containing iron or steel is covered. A finished machine, for example, does not automatically fall within CBAM merely because it contains steel components.
02 METALS
ALUMINIUM

Aluminium and selected articles

The aluminium sector covers specified unwrought materials, semi-finished products and selected articles. Product form, composition and tariff classification are relevant to determining coverage.

EXAMPLES OF COVERED PRODUCT TYPES
Unwrought aluminium Aluminium bars and profiles Aluminium sheets and strip Aluminium tubes and pipes Selected aluminium articles
ILLUSTRATIVE CN CODES 7601 7604 7606 Check the relevant code and product description.
Classification matters: Aluminium content alone does not establish CBAM coverage. The classification of the imported article remains decisive.
03 BUILDING MATERIALS
CEMENT

Cement and related materials

CBAM covers specified cement products and related materials identified by the relevant CN codes. The exact composition and classification of the product are important.

EXAMPLES OF COVERED PRODUCT TYPES
Cement clinker White Portland cement Other Portland cement Specified hydraulic cements
ILLUSTRATIVE CN CODES 2523 10 00 2523 21 00 2523 29 00 Verify the complete list in Annex I.
Classification matters: A construction product containing cement is not necessarily classified as cement and is not automatically covered by CBAM.
04 CHEMICALS
FERTILISERS

Fertilisers and selected inputs

CBAM includes specified fertiliser products and certain chemical inputs used in fertiliser production. Coverage is not identical to the entire commercial fertiliser market.

EXAMPLES OF COVERED PRODUCT TYPES
Ammonia Nitric acid Selected nitrogen fertilisers Specified mixed fertilisers
ILLUSTRATIVE CN CODES 2808 00 00 2814 3102 Only the applicable listed codes are covered.
Classification matters: Some fertiliser categories and chemical preparations may fall outside the listed CBAM codes. The legal scope must be checked product by product.
05 ENERGY
HYDROGEN

Hydrogen imports

Hydrogen is expressly included in the CBAM product scope. Its treatment must be assessed under the relevant product code, origin rules and CBAM provisions.

EXAMPLE OF COVERED PRODUCT
Hydrogen
ILLUSTRATIVE CN CODE 2804 10 00 Hydrogen as listed in Annex I.
Important distinction: The annual 50-tonne mass-based exemption introduced by the amended CBAM framework does not apply to hydrogen.
06 ENERGY
ELECTRICITY

Imported electrical energy

Electricity is one of the six sectors expressly covered by CBAM. Its regulatory treatment includes specific provisions reflecting the characteristics of electricity imports and emissions accounting.

EXAMPLE OF COVERED PRODUCT
Electrical energy
ILLUSTRATIVE CN CODE 2716 00 00 Electrical energy as listed in Annex I.
Important distinction: Electricity is excluded from the annual 50-tonne mass-based exemption. Specific CBAM provisions must be considered for electricity imports.
BEYOND RAW MATERIALS

CBAM is not limited to basic commodities.

The CBAM product list also includes certain downstream goods, particularly in the iron, steel and aluminium sectors. This means that some manufactured articles may be covered even though they are not primary raw materials.

However, CBAM does not apply to every product manufactured from these materials. The decisive question remains whether the imported article is classified under a CN code listed in Annex I.

Understand how CN codes determine coverage
PRODUCT COVERAGE EXAMPLE ILLUSTRATIVE
Fe
MATERIAL Steel Material composition alone
CN
CLASSIFICATION Finished product CN code Determined by the product’s characteristics
LEGAL ASSESSMENT Is the CN code listed in Annex I?

Only the applicable legal scope determines whether the product is a CBAM good.

Product coverage is not the same as an obligation to surrender certificates.

A good may fall within the product scope of Annex I, while an applicable exemption, territorial exclusion or other legal condition changes the obligations arising from a particular import. Product classification and the application of exemptions should therefore be assessed separately.

PRIMARY LEGAL SOURCE Regulation (EU) 2023/956 — Annex I

The legally defined product scope is established by the CBAM Regulation, as amended. Always consult the applicable consolidated provisions and CN nomenclature.

Read the CBAM Regulation
02 / CLASSIFICATION & SCOPE

How to verify whether your goods fall under CBAM.

Determining CBAM coverage starts with customs classification. A product’s commercial name, material composition or industry sector is not enough: importers must establish the correct Combined Nomenclature code, compare it with Annex I and assess the relevant legal exclusions and exemptions.

UNDERSTANDING THE CODES

HS, CN and TARIC: three different levels.

The Harmonized System provides the international foundation for classifying traded goods. The European Union extends this system through the eight-digit Combined Nomenclature and the more detailed TARIC structure.

CBAM Annex I identifies covered products through CN codes and descriptions. TARIC is useful for checking the measures associated with a customs classification, but a TARIC search does not replace the legal scope assessment under the CBAM Regulation.

Important distinction

CBAM coverage is based on the applicable CN classification. Additional TARIC digits and measure information help with customs processing but do not independently redefine the products listed in Annex I.

EU CLASSIFICATION STRUCTURE ILLUSTRATIVE
EXAMPLE 7208 51 20 00

Illustrative ten-digit TARIC classification structure for a flat-rolled steel product. The correct code must be determined from the actual product characteristics.

7208 5 1 2 0 0 0
HS subheading First 6 digits identify the HS subheading
7208 5120 0 0
Combined Nomenclature 8 digits — the relevant EU CN classification
7208 5120 00
TARIC 10 digits — detailed EU tariff structure
PRACTICAL VERIFICATION

A five-step CBAM product scope check.

Use this process before importing a product, especially where the goods contain steel, aluminium or other materials associated with CBAM-covered sectors.

01
PRODUCT IDENTIFICATION

Establish the technical characteristics

Collect the product description, material composition, manufacturing characteristics, intended function and technical documents necessary for customs classification.

OUTPUT Reliable product description
02
CUSTOMS CLASSIFICATION

Determine the correct CN code

Apply the General Rules for the Interpretation of the Combined Nomenclature, relevant section and chapter notes, and applicable classification guidance. Where appropriate, consider obtaining Binding Tariff Information.

OUTPUT Supported 8-digit CN code
03
LEGAL PRODUCT SCOPE

Compare the code with CBAM Annex I

Check whether the applicable CN code and description fall within the product entries listed in Annex I to Regulation (EU) 2023/956, taking account of amendments in force for the relevant import.

OUTPUT CBAM product scope result
04
IMPORT CONDITIONS

Review origin, territory and exemptions

Determine whether the goods originate in a country or territory excluded under the applicable CBAM rules. Consider the relevant customs procedure, annual mass-based exemption and other specific legal provisions.

OUTPUT Import-specific applicability
05
COMPLIANCE DECISION

Determine the resulting obligations

Where CBAM obligations apply, verify the authorised declarant requirements, customs declaration information, emissions data and subsequent reporting and certificate responsibilities.

OUTPUT Documented compliance assessment
DECISION FRAMEWORK

From CN classification to CBAM applicability.

The following simplified model distinguishes product coverage from the exemptions and conditions applying to a specific import.

START Correct CN code established
QUESTION 01 Is the product covered by CBAM Annex I?
NO Outside the listed product scope

No CBAM obligation arises solely from that product classification.

YES Proceed to import-specific checks

Assess territorial exclusions, exemptions and relevant import conditions.

FOR GOODS WITHIN ANNEX I
CHECK A Origin and territory Applicable country and territorial exclusions
CHECK B Exemptions Annual threshold and other relevant rules
CHECK C Customs treatment Procedure and specific CBAM provisions
FINAL RESULT Determine whether CBAM obligations apply to the import operation.

A product may be within Annex I while a legally applicable exemption changes the obligations for a particular importer or transaction.

PRACTICAL EXAMPLES

Why the product description is not enough.

These examples illustrate the reasoning behind CBAM scope assessment. Actual classification depends on the complete characteristics of the goods.

EXAMPLE 01 STEEL PRODUCTS

Steel fasteners

A company imports steel bolts from a non-EU country. Certain fasteners classified under heading 7318 fall within the CBAM product list.

PRODUCT Steel bolts
CLASSIFICATION Check the applicable CN code under 7318
CBAM ASSESSMENT Compare with the precise Annex I entry
Key lesson

A manufactured steel article can be within CBAM scope. Do not assume CBAM only applies to raw steel.

EXAMPLE 02 COMPLEX PRODUCTS

A finished industrial machine

A company imports machinery containing substantial quantities of steel and aluminium. Its material composition alone does not determine CBAM coverage.

PRODUCT Complete industrial machine
CLASSIFICATION Determine the machine’s correct CN code
CBAM ASSESSMENT Check whether that code is in Annex I
Key lesson

The presence of CBAM-related materials does not automatically bring an otherwise unlisted finished product into scope.

03 / EXEMPTIONS & EXCLUSIONS

CBAM exemptions: when covered goods are excluded.

A product’s inclusion in Annex I does not automatically mean that every import creates CBAM obligations. The Regulation provides specific exemptions and territorial exclusions, including an annual mass-based threshold introduced by Regulation (EU) 2025/2083.

TWO SEPARATE QUESTIONS

Product scope and import applicability are not the same.

First, determine whether the goods are classified under a CN code listed in Annex I. Then assess whether an exemption, territorial exclusion or specific legal provision changes the treatment of the import operation.

QUESTION 01 Is the product listed in Annex I? CN classification and legal description
QUESTION 02 Does an exemption or exclusion apply? Importer, quantity, origin and legal conditions
RESULT Determine the applicable CBAM treatment Document the conclusion and supporting evidence
ANNUAL MASS-BASED EXEMPTION

The 50-tonne CBAM threshold.

The amended CBAM framework establishes a de minimis exemption based on the cumulative net mass of relevant goods imported during a calendar year. It is not a separate allowance for each shipment.

ANNUAL THRESHOLD PER IMPORTER
50tonnes

Cumulative net mass of relevant Annex I goods, subject to the applicable exemption rules.

ASSESSMENT PERIOD Calendar year
CALCULATION BASIS Cumulative net mass
IMPORTANT EXCLUSION Electricity and hydrogen

How the threshold works

Where the relevant importer does not exceed the applicable 50-tonne cumulative annual threshold, the qualifying goods benefit from the mass-based exemption.

The threshold is assessed across the relevant imported goods, rather than separately for each product category, supplier, customs declaration or shipment.

If the cumulative annual threshold is exceeded, the exemption no longer applies to the relevant imports for that calendar year. The consequences must be assessed under the amended CBAM rules.

Exceeding 50 tonnes triggers obligations for the relevant annual imports.

Under Article 2a(2) of Regulation (EU) 2023/956, as amended, exceeding the annual threshold makes the relevant importer or authorised CBAM declarant subject to CBAM obligations in respect of emissions embedded in all relevant goods imported during that calendar year, including imports made before the threshold was exceeded.

The exemption is not a deductible 50-tonne allowance. Importers relying on the exemption must declare it in the relevant customs declaration.

ILLUSTRATIVE EXAMPLE

Why cumulative import monitoring matters.

Consider an importer bringing different CBAM-covered goods into the EU during the same calendar year. The example assumes that the goods are relevant to the mass-based threshold calculation.

IMPORTER / CALENDAR YEAR Illustrative cumulative net mass
Import Goods Net mass Cumulative total
Shipment 01 Steel products 18 t 18 t
Shipment 02 Aluminium products 14 t 32 t
Shipment 03 Steel products 12 t 44 t
Shipment 04 Aluminium products 9 t 53 t
0 t 50 t / THRESHOLD 53 t
Illustrative cumulative imports Threshold exceeded
Result: the annual exemption is no longer available.

The importer must assess the resulting CBAM obligations for the relevant calendar year. Monitoring should therefore start before the threshold is reached, not after it has already been exceeded.

EXCEPTIONS TO THE MASS THRESHOLD

Electricity and hydrogen are different.

The 50-tonne exemption does not extend to electricity and hydrogen. Their inclusion in Annex I must therefore be assessed under the applicable CBAM provisions without relying on this annual mass threshold.

ENERGY / 01 EL

Electricity

Electricity is covered by CBAM under its relevant CN classification. The annual 50-tonne mass-based exemption does not apply.

50-TONNE EXEMPTION Not applicable
ENERGY / 02 H₂

Hydrogen

Hydrogen is expressly listed within the CBAM framework. Imports cannot rely on the annual 50-tonne exemption.

50-TONNE EXEMPTION Not applicable
GEOGRAPHICAL SCOPE

Country of origin can change CBAM applicability.

CBAM provides exclusions for goods originating in certain countries and territories identified by the Regulation.

These exclusions reflect the specific legal framework established by the EU. They are not a general exemption for every country that has a carbon pricing system.

Importers should distinguish customs origin from the country of dispatch and verify the relevant territorial provisions before relying on an exclusion.

Origin is not the same as shipping location.

Goods dispatched from an excluded country do not automatically qualify if their legally relevant origin is elsewhere.

CBAM TERRITORIAL ASSESSMENT LEGAL CHECK
01
Determine the origin Apply the relevant customs origin rules
02
Check Annex III Verify the applicable country or territory exclusion
03
Document the outcome Retain the evidence supporting the assessment
OTHER LEGAL PROVISIONS

Additional exclusions and special cases.

The mass-based threshold and territorial exclusions are not the only relevant rules. Certain low-value goods, military-related movements and specific customs situations require separate consideration.

01

Goods of negligible value

The CBAM framework contains an exclusion for goods falling within the relevant negligible-value provisions. The applicable conditions must be assessed under the Regulation and the referenced customs legislation.

02

Military-related goods and movements

Specific exclusions exist for certain goods moved or imported in connection with military activities, subject to the relevant legal conditions. These provisions should not be treated as a general exemption for all military-sector products.

03

Special customs procedures

Customs transit, warehousing, inward processing and other procedures require analysis of the applicable CBAM rules. The fact that goods are not immediately released for free circulation can be relevant, but procedure-specific provisions must still be considered.

Explore CBAM customs implications
IMPORTER CHECKLIST

Before relying on a CBAM exemption.

An exemption should be supported by documented facts and a clear legal basis. Use these checks as part of the import review.

01 Confirm the CN code

Check whether the goods are listed in Annex I.

02 Identify the importer

Determine the relevant importer and responsibility structure.

03 Track annual quantities

Monitor cumulative net mass where the threshold applies.

04 Verify origin

Check whether an applicable territorial exclusion exists.

05 Review special provisions

Assess low-value, military and customs procedure rules.

06 Retain supporting evidence

Document the classification, exemption and import assessment.

04 / OPERATIONAL COMPLIANCE

From product classification to importer responsibility.

Identifying a CBAM-covered product is only the first operational step. Importers must connect product classification, customs declarations, annual quantities, authorised declarant requirements and emissions information within a consistent compliance process.

THE OPERATIONAL CHALLENGE

One imported product. Several connected obligations.

CBAM compliance depends on information originating from different functions: purchasing, customs, logistics, suppliers, environmental compliance and finance.

A customs declaration may establish the imported product, its origin, customs procedure and net mass. Other CBAM obligations require additional information, including embedded emissions and the identity of the responsible authorised CBAM declarant.

The objective is to ensure that the same import operation can be traced consistently across customs records and the applicable CBAM systems.

IMPORT DATA CONNECTION CONTROL MODEL
01 / CUSTOMS Import declaration CN code · Origin · Net mass · Procedure · MRN
02 / RECONCILIATION CBAM import register Product scope · Annual quantities · Responsible party
03 / CBAM Compliance records Emissions data · Reporting · Certificates, where applicable

The records should remain traceable to the underlying import operations.

CUSTOMS DATA CONTROL MATRIX

Which import data should be checked?

These fields support product scope verification, quantity monitoring and reconciliation between customs information and CBAM compliance records.

Data element Why it matters Recommended control
01 CN classification Determines whether the product falls within the applicable Annex I scope. Verify the classification against product specifications and legal sources.
02 Country of origin Relevant to territorial exclusions and the import-specific CBAM assessment. Distinguish legally relevant origin from dispatch and supplier location.
03 Net mass Supports the annual mass-based threshold calculation and CBAM quantity reconciliation. Check the declared net mass, unit conversions and cumulative totals.
04 Importer and representation Helps identify the relevant importer and determine the CBAM declarant responsibility structure. Review the importer identity, representation arrangements and applicable authorisation requirements.
05 Customs procedure Relevant to the timing and application of CBAM obligations, including procedure-specific provisions. Reconcile procedure codes and subsequent customs treatment.
06 Declaration reference Provides traceability between individual customs operations and CBAM compliance records. Retain the MRN and relevant declaration or goods-item references.
07 Emissions information Supports the calculation and declaration of embedded emissions where CBAM obligations apply. Obtain the required emissions data, assess the applicable methodology and verification requirements.

Not all CBAM information comes from the customs declaration. Customs records and supplier emissions documentation serve different purposes. They must be reconciled, but one does not automatically replace the other.

WHO DOES WHAT?

Customs roles and CBAM roles must be aligned.

The importer, customs representative and authorised CBAM declarant may have different functions. Their responsibilities must be established according to the applicable legal arrangements.

ROLE 01 IM

Importer

Provides accurate commercial and technical information, identifies relevant imported goods and supports the assessment of applicable CBAM obligations.

ROLE 02 CR

Customs representative

Performs customs representation according to the agreed mandate and the applicable customs rules. Direct and indirect representation have different legal consequences, including for CBAM.

ROLE 03 AD

Authorised CBAM declarant

Where required, the authorised CBAM declarant is responsible for the relevant CBAM declaration and certificate obligations, subject to the conditions and allocation of responsibilities established by law.

IMPORTANT

Indirect customs representation requires specific CBAM authorisation checks. Under Article 5 of Regulation (EU) 2023/956, as amended, an indirect customs representative acting for an importer not established in an EU Member State must obtain authorised CBAM declarant status even where the importer qualifies for the annual mass-based exemption. Where an indirect representative acts as the authorised CBAM declarant, the applicable CBAM obligations must be assessed for the goods imported on behalf of that importer.

Understand the authorised CBAM declarant
COMPLIANCE RISK REGISTER

Six errors that can compromise CBAM compliance.

Most operational problems arise when product, customs and CBAM records are inconsistent or when responsibilities have not been established before importation.

01
PRODUCT SCOPE

Incorrect CN classification

An incorrect classification may cause a covered product to be omitted from CBAM monitoring or an unlisted product to be treated as covered.

PREVENTIVE CONTROL Technical classification review
02
GEOGRAPHICAL SCOPE

Confusing origin with dispatch

Goods shipped from an excluded country do not necessarily originate there for customs purposes.

PREVENTIVE CONTROL Documented origin assessment
03
ANNUAL THRESHOLD

Monitoring shipments separately

Applying the 50-tonne threshold independently to each declaration, supplier or product category can lead to an incorrect exemption assessment.

PREVENTIVE CONTROL Importer-level annual mass register
04
AUTHORISATION

Unclear CBAM declarant responsibility

The importer and customs representative may assume that the other party is responsible for CBAM authorisation and subsequent obligations.

PREVENTIVE CONTROL Pre-import role verification
05
EMISSIONS DATA

Incomplete supplier information

Missing or unreliable emissions information can affect the preparation of the annual CBAM declaration and the calculation of applicable obligations.

PREVENTIVE CONTROL Early supplier data collection
06
RECONCILIATION

Customs and CBAM records do not match

Differences in net mass, product codes, reporting periods or import references can create inconsistencies that require investigation and correction.

PREVENTIVE CONTROL Periodic declaration reconciliation
OPERATIONAL CONTROL CYCLE

Controls before, during and after import.

A practical CBAM process should identify potential issues before customs clearance, maintain traceability at import and reconcile information throughout the year.

PHASE 01 BEFORE IMPORT

Establish the requirements

  • Confirm CN classification and Annex I scope
  • Verify origin and applicable exclusions
  • Monitor cumulative annual net mass
  • Identify the responsible CBAM declarant
  • Check applicable authorisation requirements
PHASE 02 AT IMPORT

Maintain customs consistency

  • Check customs declaration data
  • Verify relevant CBAM declaration information
  • Record net mass and goods-item details
  • Retain customs references and supporting documents
  • Identify discrepancies requiring correction
PHASE 03 AFTER IMPORT

Reconcile and report

  • Update the CBAM import register
  • Collect and assess embedded emissions data
  • Reconcile customs and CBAM quantities
  • Prepare annual reporting information
  • Manage certificate obligations where applicable
DOCUMENTARY TRACEABILITY

Every CBAM assessment needs an evidence trail.

A documented import register helps connect customs declarations with product scope assessments, exemptions, annual quantities and emissions data.

The precise records and retention obligations depend on the applicable customs and CBAM provisions. An internal register is a useful control mechanism, not a substitute for legally required declarations or supporting documentation.

Explore CBAM reporting obligations
EXAMPLE / IMPORT AUDIT TRAIL DOCUMENT CONTROL
01
Customs declaration MRN, goods item, CN code, origin and net mass
02
Classification evidence Product specifications and legal scope assessment
03
Exemption assessment Annual mass, origin and applicable conditions
04
CBAM compliance records Responsible party, emissions and reporting information
TRACEABLE IMPORT OPERATION
05 / QUESTIONS & FURTHER READING

CBAM goods: frequently asked questions.

Practical answers to common questions about CBAM product coverage, CN classification, exemptions, the annual 50-tonne threshold and the responsibilities arising from importing covered goods into the European Union.

UNDERSTANDING THE RULES

Product coverage is the starting point. Legal applicability requires further checks.

CBAM applies to goods identified through the relevant legal provisions and CN codes. Importers should also consider origin, exemptions, customs procedures, annual quantities and the requirements applicable to the responsible CBAM declarant.

01 Which goods are covered by CBAM?

The CBAM Regulation initially covers specified goods in six sectors: cement, electricity, fertilisers, iron and steel, aluminium and hydrogen.

Coverage is determined by the CN codes and product descriptions listed in Annex I of Regulation (EU) 2023/956, as applicable. Not every product commercially associated with these sectors is automatically included.

Importers should verify the precise classification of the goods and consult the current legal text.

02 Does CBAM apply to all steel and aluminium products?

No. CBAM coverage depends on whether the specific product falls within a CN code and description listed in Annex I.

Certain steel and aluminium products, including specified downstream articles, are covered. Other products containing steel or aluminium may fall outside the listed scope.

Material composition alone is not sufficient to establish CBAM coverage.

03 How can an importer check whether a product is subject to CBAM?

First, establish the correct CN classification using the product’s technical characteristics and the applicable classification rules.

Next, compare the classification with Annex I of the CBAM Regulation. The importer should then assess relevant exemptions, origin, customs treatment and other applicable legal conditions.

Where classification remains uncertain, a Binding Tariff Information decision may be relevant under the Union Customs Code.

04 What is the 50-tonne CBAM exemption?

Regulation (EU) 2025/2083 introduced a mass-based exemption for qualifying importers whose cumulative annual net mass of relevant CBAM goods does not exceed 50 tonnes, subject to the applicable conditions.

The threshold is assessed over the calendar year, rather than separately for each shipment, supplier or product category.

Electricity and hydrogen are excluded from this mass-based exemption. Importers relying on the exemption must indicate it in the relevant customs declaration.

05 Is the 50-tonne threshold calculated for each shipment?

No. The relevant calculation is based on cumulative annual net mass under the amended CBAM framework.

Several individually small imports may together exceed the threshold. Importers should therefore maintain a consistent annual quantity register.

The exemption is not a deductible 50-tonne allowance. Once the threshold is exceeded, the applicable CBAM obligations concern all relevant goods imported during that calendar year, including imports made before the threshold was exceeded.

06 Are electricity and hydrogen covered by the 50-tonne exemption?

No. The annual mass-based exemption does not apply to electricity or hydrogen.

Their CBAM treatment must be assessed under the applicable sector-specific provisions and other relevant legal conditions, including any territorial exclusions expressly provided by the Regulation.

07 Are goods originating in Switzerland or Norway subject to CBAM?

Goods originating in Switzerland and Norway benefit from the territorial exclusions specified in Annex III of the CBAM Regulation, subject to the relevant provisions.

Iceland and Liechtenstein are also listed among the excluded countries. The current legal text should be checked for the complete list and any applicable special rules.

The legally relevant origin must not be confused with the country of dispatch.

08 Does CBAM apply to goods placed under customs warehousing or transit?

CBAM is principally connected with the importation of covered goods into the EU customs territory under the conditions established by the Regulation.

Goods under transit, customs warehousing or other special customs procedures require an assessment of the relevant procedure and subsequent customs treatment.

Particular rules may apply to inward processing and the release for free circulation of resulting processed products. The customs procedure must therefore be examined rather than assuming that all special procedures have identical CBAM consequences.

09 Who is responsible for CBAM when a customs representative is used?

The allocation of responsibility depends on the importer’s establishment, the type of customs representation and the applicable CBAM provisions.

Direct and indirect customs representation are legally distinct. An indirect customs representative may act as the authorised CBAM declarant in the circumstances provided by Article 5 of Regulation (EU) 2023/956, as amended.

Where the importer is not established in an EU Member State, the indirect customs representative is subject to specific CBAM authorisation requirements, including where the annual mass-based exemption applies.

Read the authorised CBAM declarant guide ↗
10 Does CBAM replace customs duties or import VAT?

No. CBAM is a separate regulatory mechanism and does not replace the normal customs duty and import VAT framework.

Covered goods may still be subject to customs duties, import VAT and other applicable import measures. Their treatment must be assessed independently from CBAM obligations.

11 When did the definitive CBAM regime begin?

The definitive CBAM regime began on 1 January 2026, following the transitional reporting period.

Under the amended framework, the first annual CBAM declaration for 2026 imports is due by 30 September 2027, together with the applicable certificate surrender obligations.

The sale of CBAM certificates relating to the definitive regime begins on 1 February 2027. Importers should consult the current implementation rules and official guidance.

Explore the CBAM timeline ↗
12 What records should an importer retain for CBAM goods?

Depending on the applicable obligations, relevant records may include customs declarations, product specifications, classification evidence, origin documentation, net mass data, supplier emissions information and CBAM reporting records.

The importer or responsible CBAM declarant should retain documentation in accordance with the specific record-keeping requirements of the customs and CBAM legal frameworks.

A structured import register can support traceability and reconciliation.

13 Must an indirect customs representative be authorised if the importer stays below 50 tonnes?

Where the importer is not established in an EU Member State, its indirect customs representative must obtain authorised CBAM declarant status, irrespective of whether the importer benefits from the annual mass-based exemption, under Article 5(2) of Regulation (EU) 2023/956 as amended.

For EU-established importers, the allocation of CBAM responsibilities depends on the applicable representation arrangements and legal conditions.

Importers and customs representatives should verify these arrangements before the relevant customs operations.

Understand CBAM declarant authorisation ↗
THE ESSENTIAL DISTINCTION

A covered CN code is not the entire CBAM assessment.

Product classification determines whether goods fall within the listed product scope. The final compliance assessment must also consider origin, exemptions, customs procedures, annual quantities and the responsible CBAM declarant.

01 Classify Identify the correct CN code
02 Verify Check scope and exemptions
03 Document Record the applicable treatment
CBAM Goods — Customs Explorer

This guide provides general information about the EU CBAM framework. Product classification and legal applicability must be assessed against the current legislation and the circumstances of each import.

Back to FAQs ↑