EUDR Timeline. Deadlines that matter.
When does the EU Deforestation Regulation apply? Explore the key deadlines, transitional provisions and implementation milestones affecting operators, traders and customs procedures.
The EUDR has been in force since 29 June 2023, but its principal obligations apply on different dates depending on the legal role, the qualifying operator category and the products concerned.
Three key milestones
The applicable date depends on the relevant legal conditions—not simply company size.
General EUDR application
The main application date under Article 38(2). It also applies to products covered by the former EU Timber Regulation, without the small-operator extension under Article 38(3).
Deferred application
For qualifying natural-person operators and micro or small undertaking operators established as such by 31 December 2024. The extension excludes products covered by the former EU Timber Regulation.
Extended product scope
Application to products newly brought into EUDR scope by Commission Delegated Regulation (EU) 2026/2102, in accordance with its specific provisions.
Which deadline applies to your business?
EUDR implementation is not governed by a single deadline for every company and every product. The applicable date depends on the amended legal framework, the operator’s eligibility and the products concerned.
Article 38 of Regulation (EU) 2023/1115, as amended by Regulation (EU) 2025/2650, establishes the main application dates. Separate provisions must also be considered for products newly included in Annex I.
General application date
The principal application date for the EUDR provisions specified in Article 38(2). Businesses not eligible for the deferred application date must prepare for this milestone.
Deferred application date
Applies to qualifying operators that are natural persons or were established as micro or small undertakings by 31 December 2024. The extension does not apply to products covered by the former EU Timber Regulation.
Newly added products
A separate application milestone applies to products newly brought into EUDR scope by Commission Delegated Regulation (EU) 2026/2102, under the conditions specified in that act.
The small-operator extension is not automatic.
A business should not assume that its current size is sufficient to qualify for the later application date. The legal conditions, reference date and product exclusions must all be examined.
The historical eligibility test matters. Becoming a small undertaking after this date does not, by itself, establish eligibility for the extension.
Is the business acting as an operator?
Determine its legal role under the EUDR. Do not confuse the operator definition with the ordinary commercial meaning of importer or exporter.
Does the qualifying category apply?
Verify whether the operator is a natural person or meets the relevant micro or small undertaking criteria.
Was the size condition met by the reference date?
For undertakings, establish and document the applicable status as at 31 December 2024.
Are the goods excluded from the extension?
Check whether the relevant product was covered by the former EU Timber Regulation, and consider any product-specific rules.
Why the former EUTR changes the deadline.
The EUDR replaces the former EU Timber Regulation, Regulation (EU) No 995/2010. However, its transitional provisions treat certain timber products differently from other EUDR product groups.
Products previously covered by EUTR
The 30 June 2027 extension under Article 38(3) does not apply to products covered by the former EU Timber Regulation.
Other products within EUDR scope
Qualifying operators may benefit from the later application date, provided the Article 38(3) requirements are satisfied.
Not every wood-based product has the same historical regulatory treatment. Check whether the specific product was covered by Regulation (EU) No 995/2010 and its applicable product list. Separate EUDR transitional rules may also affect timber produced before the relevant cut-off dates.
Four assumptions to avoid.
“All SMEs have until June 2027.”
Incorrect. The extension is conditional, refers to defined categories and contains a product exclusion.
“Every wooden product has the same deadline.”
Incorrect. Former EUTR coverage and other transitional provisions must be examined at product level.
“Every trader must submit a new DDS.”
Incorrect. The amended EUDR differentiates upstream operators, downstream operators, traders and qualifying primary operators.
“All Annex I products share one date.”
Incorrect. Newly added products may be subject to specific application arrangements under the relevant amending act.
Determine the deadline. Then build the compliance plan.
A documented application-date assessment should precede supplier onboarding, due diligence preparation, systems configuration and customs readiness work.
How the EUDR reached its current form.
The EU Deforestation Regulation has evolved since its adoption in 2023. Subsequent amendments have changed its application timetable and introduced adjustments to implementation requirements.
Follow the major legislative milestones and understand how each development affects the interpretation of the current regulatory framework.
The EUDR is established
Regulation (EU) 2023/1115 establishes a new EU framework addressing deforestation and forest degradation associated with specified commodities and derived products.
The original timetable is postponed
Regulation (EU) 2024/3234 amends the application timetable, moving the principal EUDR implementation dates forward by one year.
Further postponement and simplification
Regulation (EU) 2025/2650 revises the EUDR framework, including application dates and differentiated obligations for categories of operators and traders.
The list of relevant products is updated
Commission Delegated Regulation (EU) 2026/2102 amends Annex I to Regulation (EU) 2023/1115, introducing changes to the relevant product list.
Product-scope assessments must reflect the applicable Annex I version and the specific application arrangements for newly added products.
From legislation to operational compliance
The amended framework establishes differentiated application dates. Businesses must identify their legal role, product scope and eligibility before determining which obligations apply.
A postponed deadline does not erase the legal framework.
Entry into force, application dates, amendments and transitional provisions are different legal concepts. The applicable rules must be determined from the consolidated framework and the relevant amending acts.
What happens to products already in the supply chain?
Application dates are only part of the picture. Production dates, previous EUTR coverage and transitional arrangements can also matter.
Legacy products. Different rules.
Products already produced, harvested or placed on the EU market may be subject to transitional arrangements. Timber and timber products previously covered by the EU Timber Regulation require particular attention.
The decisive factors include the product’s legal scope, production date, date of first placing on the EU market and the relevant EUDR transitional provision. Existing stock does not automatically qualify for an exemption.
Historical production threshold
The date used to distinguish legacy products from later production under the EUDR’s transitional framework.
General EUTR repeal
Regulation (EU) No 995/2010 is repealed, subject to the continued application specifically preserved by Article 37.
End of the special EUTR period
Legacy timber covered by Article 37(2) moves to the Article 37(3) arrangement, requiring compliance with Article 3 EUDR.
Follow the timber. Then follow the dates.
This matrix concerns timber and timber products within the product scope of the former EUTR. It is not a universal rule for all wood-based goods or other EUDR commodities.
| Production / harvest | First placing on EU market | Regulatory treatment |
|---|---|---|
| Before 29 Jun 2023 Legacy timber | Before 30 Dec 2026 | EUTR Former EUTR rules apply where the product falls within that regulation’s scope. |
| Before 29 Jun 2023 Legacy timber | 30 Dec 2026 to 30 Dec 2029 | EUTR TRANSITION EUTR continues to apply under Article 37(2). |
| Before 29 Jun 2023 Legacy timber | From 31 Dec 2029 | EUDR ARTICLE 3 Article 3 EUDR applies pursuant to Article 37(3). |
| From 29 Jun 2023 Later production | From 30 Dec 2026 | EUDR The EUDR applies according to its relevant provisions and product scope. |
“First placing on the market” has a specific legal meaning. Later resale, distribution or customs movements should not automatically be treated as a new first placing.
EUTR products and EUDR products are not identical lists.
The former EU Timber Regulation covered timber and timber products identified in its Annex. The EUDR uses its own Annex I, which must be checked separately.
This distinction matters when assessing whether the Article 37 timber transition applies to a particular CN classification.
Review EUDR product scopeDetermines whether the special timber transition is relevant.
Determines the product’s scope under the new framework, subject to its application rules.
Three scenarios. Three different checks.
Illustrative cases assume the goods fall within the relevant product lists. Actual treatment depends on documented facts.
Timber harvested in 2022, first marketed in 2027
If the product was covered by the former EUTR, Article 37(2) preserves that regime during the specified transitional period.
Timber harvested in 2025, first marketed in 2027
The pre-29 June 2023 legacy transition does not apply. Assess the EUDR requirements applicable to the product and operator.
Cocoa product held in an EU warehouse before application
A warehouse entry date alone does not establish the relevant legal treatment. Verify production and first placing on the market, product scope and supporting evidence.
A transitional claim needs an evidence trail.
Companies relying on a transitional arrangement should be able to substantiate the facts that make it applicable. The exact evidence depends on the product, transaction and legal regime.
Turn the deadline into a readiness plan.
Map your products, suppliers, legal roles, due diligence workflows and customs data before the applicable date.
From legal deadline to operational readiness.
EUDR preparation is more than tracking an application date. Businesses need to identify affected products, establish their regulatory role, organise supply-chain information and align their customs processes with the applicable rules.
The roadmap below is an operational planning framework, not a separate legal obligation. Each action must be adapted to the company’s role, product scope and applicable EUDR provisions.
Six workstreams. One coordinated process.
Identify relevant products
Map CN codes against the applicable Annex I, including amendments and product-specific application dates.
Determine the business role
Distinguish operators, micro or small primary operators, downstream operators and traders. The obligations differ between categories.
Establish traceability
Identify the information required for the applicable role, including supplier records, production information, geolocation where required, and relevant reference identifiers.
Configure the correct workflow
Where required, establish information collection, risk assessment, risk mitigation and submission procedures. Apply the simplified regime only where its legal conditions are met.
Connect compliance to declarations
Define responsibility for EUDR Information System access, reference management and the customs information required for relevant import or export operations.
Test before application
Run representative transactions, investigate missing data and establish an escalation procedure for potentially non-compliant goods or unavailable system references.
The correct implementation sequence depends on the business model. These workstreams may progress in parallel.
Not every business submits the same declaration.
The 2025 amendment differentiates the responsibilities of operators, qualifying primary operators, downstream operators and traders. Determine the legal role before configuring the reporting process.
Upstream operator
An operator placing relevant products on the market or exporting them, other than a downstream operator.
Micro or small primary operator
A specifically defined category involving qualifying production activities and low-risk-country conditions.
Downstream operator or trader
A downstream operator uses relevant products already covered by a DDS or simplified declaration. Traders make relevant products available on the market.
Important distinction: a micro or small primary operator is not simply any small importer or exporter. Article 4a has its own conditions. Likewise, downstream operators and traders remain subject to applicable Article 5 obligations even though they do not routinely submit a new due diligence statement.
The customs declaration is the final checkpoint.
For relevant products subject to the EUDR customs interface, the compliance process must be coordinated with release for free circulation or export.
A due diligence statement reference or simplified declaration identifier may be required according to the applicable legal regime. These identifiers are not interchangeable with ordinary customs declaration references.
A representative may transmit information or perform authorised tasks, but the allocation of EUDR legal responsibility is determined by the Regulation and the relevant mandate.
EUDR Customs Readiness
Is the CN-classified product covered by the applicable Annex I?
Has the relevant obligation become applicable to this product and role?
Who is the EUDR operator, and who is authorised to perform each task?
Is the relevant DDS reference, declaration identifier or other applicable information available?
Are customs data, applicable TARIC measures and supporting records consistent?
Build the data structure before the deadline.
A practical product register can connect commercial, compliance and customs teams. The fields below are suggested internal controls, not a prescribed EU database format.
Classification
SKU, description, CN code, Annex I scope and applicable date.
Legal responsibility
Operator category, responsible company and relevant EORI details.
Source information
Suppliers, countries of production and required traceability evidence.
Compliance status
Applicable workflow, review status and supporting documentation.
Reference management
DDS references or simplified declaration identifiers, where applicable.
Declaration linkage
Shipment records, customs procedure, declaration references and exceptions.
What if a shipment is not ready?
A functioning compliance process must identify problems before they reach the customs declaration stage.
Supplier evidence incomplete
Escalate to the responsible compliance owner and determine whether the legal requirements can be satisfied.
Identifier unavailable or inconsistent
Verify the Information System status, reference validity and applicable contingency arrangements.
Product classification disputed
Reassess the CN code and Annex I wording before applying or excluding the relevant EUDR requirements.
Possible non-compliance identified
Apply the relevant legal escalation, information and non-placement rules. A shipment should not proceed merely because its customs data is complete.
Compliance begins upstream. Customs verifies the connection.
The strongest EUDR process links legal classification, supplier information, applicable declarations and customs execution without confusing their respective responsibilities.
EUDR timeline. Questions answered.
Application dates, operator eligibility and transitional provisions can produce different outcomes for different products and businesses. These answers clarify the most important distinctions in the amended EUDR framework.
For a specific transaction, always assess the product classification, legal role, production history and applicable provisions together.
Ten practical questions
01 When does the EUDR start applying?
The principal provisions identified in Article 38(2) apply from 30 December 2026. Article 38(3) provides a later date for qualifying operators, while certain newly added Annex I products have their own application arrangements.
The EUDR itself entered into force on 29 June 2023. Entry into force and application of substantive obligations are distinct legal events.
02 Do all micro and small businesses have until 30 June 2027?
No. Article 38(3) applies to operators meeting its defined conditions, including the qualifying category and the relevant status by 31 December 2024.
The extension expressly excludes products covered by the Annex to Regulation (EU) No 995/2010, the former EU Timber Regulation.
03 Why do some timber products have an earlier deadline?
Products covered by the former EUTR Annex are excluded from the Article 38(3) small-operator extension.
In addition, Article 37 establishes specific transitional arrangements for certain timber and timber products produced before 29 June 2023. These rules should not be applied automatically to every wood-based product.
04 What happens to timber harvested before 29 June 2023?
Article 37(2) preserves the application of the former EUTR until 31 December 2029 for qualifying timber and timber products produced before 29 June 2023 and placed on the market from 30 December 2026.
Article 37(3) provides that relevant legacy timber placed on the market from 31 December 2029 must comply with Article 3 EUDR.
The actual treatment depends on historical EUTR product coverage and the documented facts.
05 Are goods already in a warehouse automatically exempt?
No. Warehouse storage alone does not determine the EUDR treatment. Relevant factors include the product’s production date, its first placing on the EU market, the applicable product list and the legal provisions governing the transaction.
A customs warehouse, commercial warehouse and goods already placed on the Union market are not interchangeable legal situations.
06 When do newly added Annex I products become subject to the EUDR?
The European Commission identifies 30 December 2027 as the application date for products newly added to Annex I by Commission Delegated Regulation (EU) 2026/2102.
This does not postpone obligations for products already covered by the EUDR. The product’s CN classification and the relevant version of Annex I must be checked.
07 Does every trader need to submit a due diligence statement?
No. Regulation (EU) 2025/2650 differentiates upstream operators, qualifying micro or small primary operators, downstream operators and traders.
Article 5 establishes obligations for downstream operators and traders, including applicable information, traceability and registration requirements, without imposing routine submission of a new DDS for every downstream transaction.
08 Must a customs declaration always contain an EUDR reference?
Not every customs declaration is subject to the same EUDR requirements. The relevant customs interface depends on product scope, applicable date, customs procedure and the operator’s legal obligations.
Where required, the appropriate DDS reference or other applicable identifier must be managed consistently with the customs declaration and supporting records.
09 Can a customs representative submit an EUDR declaration?
The EUDR allows certain tasks to be performed through an authorised representative, subject to the applicable legal provisions and mandate.
Customs representation under the Union Customs Code does not automatically establish authority to perform every EUDR task. The two legal relationships should be assessed separately.
10 What should a company prepare before its application date?
A practical preparation plan should establish product scope, operator classification, supplier information, applicable due diligence processes, reference management and customs data responsibilities.
These are recommended implementation workstreams. Their precise content depends on the company’s legal obligations and supply-chain position.
Review the implementation roadmapThe legal framework. Read the primary sources.
The EUDR must be read together with its amendments and applicable delegated and implementing acts. The consolidated text is useful for research, while the published legal acts remain the authoritative legislative sources.
Regulation (EU) 2023/1115
Establishes the EUDR framework, product scope, due diligence rules, customs interface and transitional provisions.
Regulation (EU) 2024/3234
Introduced the first postponement of the EUDR’s principal application timetable. Its dates were subsequently amended again in 2025.
Regulation (EU) 2025/2650
Revises application dates, operator and trader obligations, and the framework for qualifying micro or small primary operators.
Delegated Regulation (EU) 2026/2102
Updates Annex I and introduces specific application arrangements for newly included products.
Official application-date overview, legislative developments, Information System resources and implementation guidance.
Source interpretation: Commission guidance and FAQs support implementation but do not replace binding EU legislation. When checking historical transitional scenarios, confirm that guidance reflects the latest legislative amendments.
One regulation. Several critical dates.
The right application date is the starting point. Product classification, legal role, traceability and customs readiness determine what your business must do next.