Food & Feed Controls.
One shipment. Multiple regulatory layers. Understand how EU food safety requirements, official border controls and customs clearance work together.
Where official border controls are mandatory, the relevant competent authority must complete the required checks before customs may authorise release for free circulation.
General obligations for safe food and feed.
Risk-based checks and designated border facilities.
Declarations, supporting documents and release.
Same border. Different control routes.
Food and feed imports do not follow one universal inspection procedure. The correct route depends on product composition, intended use, origin, EU risk measures and the applicable regulatory classification.
Products of animal origin
Meat, fishery products, dairy products, eggs and other products of animal origin may be subject to veterinary and food-safety entry requirements.
- Authorised third country or region, where required
- Approved establishments, where applicable
- Official certificates or other required documents
- Documentary, identity and physical checks
Food of non-animal origin
Cereals, spices, nuts, fruit, vegetables and other non-animal foods are not automatically subject to mandatory BCP checks under the food-control regime.
- Check product and country combinations
- Review increased-control and emergency measures
- Verify sampling and certification requirements
- Check separate phytosanitary rules where relevant
Feed and feed materials
Feed ingredients, compound feed and other products intended for animal nutrition must comply with applicable EU feed-safety and import requirements.
- Identify animal or non-animal ingredients
- Check feed hygiene and traceability
- Review applicable risk-based import measures
- Verify whether official border checks apply
When are BCP and CHED required?
This overview identifies the usual control route. The current EU measures and any applicable exceptions must be verified for each consignment.
| Product category | BCP control | CHED | Key legal check |
|---|---|---|---|
| Regulated products of animal origin | Generally required | CHED-P | Article 47 + Regulation 2021/632 |
| Non-animal food listed for increased controls | Required | CHED-D | Regulation 2019/1793 and amendments |
| Non-animal food outside specific BCP measures | Not generally required | Not generally required | Articles 44–46 and other applicable rules |
| Qualifying exempt composite products | Exempt under conditions | No BCP CHED-P for exempt route | Regulation 2021/630 |
| Feed containing regulated animal products | Depends on classification | As applicable | Animal-product and feed-specific legislation |
| Non-animal feed subject to increased controls | Required where listed | CHED-D | Article 47 and relevant EU measures |
Some plant-based products may also be subject to phytosanitary controls and CHED-PP. Those requirements must be assessed separately from food and feed safety controls. Explore Plant Health Controls ↗
Composite products. Ingredients change the route.
A food containing both plant products and processed products of animal origin may fall under the composite-product rules. Its treatment cannot be determined from the customs chapter alone.
What is actually inside the food?
Composition, processing, storage conditions and the specific regulatory conditions determine whether BCP controls apply.
Does the product contain processed meat or other regulated animal ingredients?
Is it shelf-stable, or does it require controlled-temperature storage?
Does it meet the conditions for exemption from BCP controls?
Is an official certificate, private attestation or another document required?
Regulation 2021/630 provides conditional exemptions for specified shelf-stable composite products. Eligible goods remain subject to applicable entry requirements and risk-based official controls.
Regulation 2021/630 ↗Four shipments. Four different assessments.
Frozen fish from a third country
Normally subject to the applicable BCP official controls and CHED-P, together with country, establishment and certification requirements where relevant.
CHECK: ANIMAL-ORIGIN ENTRY RULESSpices from a third country
The BCP route depends on whether the specific product and origin are covered by increased-control or emergency measures. The product name alone is insufficient.
CHECK: CURRENT PRODUCT/ORIGIN LISTShelf-stable packaged biscuits
Biscuits containing processed animal ingredients may qualify for a BCP exemption, but only where all relevant conditions are satisfied.
CHECK: COMPOSITION AND EXEMPTIONPlant-based feed ingredient
Determine whether specific increased controls apply and verify feed-safety obligations. Plant-health rules may require a separate assessment.
CHECK: FEED AND RISK MEASURESClassification comes before documentation.
Check the current consolidated regulations and the applicable product lists before choosing the control route.
From border arrival to customs release.
For consignments subject to mandatory border controls under Article 47 of Regulation 2017/625, the Common Health Entry Document connects the operator, the competent authority and customs. Each step has a distinct legal purpose.
Six stages. One controlled consignment.
The sequence below describes the standard BCP route. Specific derogations, onward transportation and authorised control-point arrangements may change where individual checks are performed.
Pre-notify the consignment
The operator responsible for the consignment completes the relevant CHED information in TRACES NT and submits the notification before physical arrival in the Union.
Present the goods at the appropriate BCP
The consignment follows the designated entry route. The selected Border Control Post must be authorised for the relevant category of animals or goods.
Documentary verification
The competent authority examines the required certificates, official documents and other relevant records. Documentary checks are generally required for consignments within Article 47(1).
Examine the consignment as required
Identity and physical checks are carried out according to the applicable rules and risk-based frequencies. Physical controls may include sampling and laboratory analysis.
Record the official decision
Once the required checks are completed, the necessary results are available and a decision has been taken, the competent authority finalises the CHED in IMSOC. The decision may permit or refuse entry under the applicable conditions.
Verify the CHED and decide on release
Customs verifies the required CHED and applicable customs conditions. Release for free circulation is possible only where the duly finalised CHED confirms compliance and the other customs requirements are fulfilled.
One electronic record. Two distinct responsibilities.
Consignment notification
Completed by the operator responsible for the consignment to identify the goods, their origin, transport, destination and other required data.
OPERATOR RESPONSIBILITYOfficial control decision
Completed by the competent authority to record official control results and its decision concerning the consignment.
COMPETENT AUTHORITYThe CHED provides the electronic record supporting communication between operators, official control authorities and customs. It does not replace the customs declaration.
What the authority actually checks.
Documentary checks
Examination of official certificates, attestations and other documents required to accompany the consignment.
Identity checks
Verification that the goods correspond to the information recorded in the accompanying documents and certificates.
Physical checks
Examination of the goods, packaging, labelling and other relevant characteristics, as appropriate.
Sampling and analysis
Where required, samples may be taken for testing of contaminants, residues, pathogens or other regulated risks.
Under Article 54, documentary checks generally apply to all Article 47(1) consignments, while identity and physical checks follow the applicable risk-based frequencies and specific legal measures. Laboratory testing is part of physical controls where required.
CHED is not one single document type.
Products
Products of animal origin and other relevant products within the applicable official control framework.
Food & feed
Certain food and feed of non-animal origin subject to specific official controls at entry.
Plants
Plants, plant products and other objects subject to relevant phytosanitary entry controls.
Animals
Live animals subject to official border controls under the applicable EU framework.
The critical point: release is a separate decision.
Customs must verify the required CHED.
For consignments covered by Article 47(1), Article 57 links the finalised CHED to customs procedures. Customs must respect the procedure indicated by the competent authority and cannot release goods for free circulation without a duly finalised CHED confirming compliance, subject to the statutory exceptions.
The CHED must be duly finalised for the relevant customs operation.
The customs procedure must be compatible with the authority’s decision.
Customs still verifies classification, restrictions and other applicable declaration requirements.
Article 57(3) requires customs to detain the consignment and immediately notify the competent BCP authority when a declaration is made for goods covered by Article 47(1) without the required CHED.
Frozen fish. From arrival to release.
Frozen fishery products for the EU market
The responsible operator submits CHED-P Part I and prepares the required certificates.
The authority checks documentation and performs any required identity, physical or laboratory controls.
The competent authority records its decision in the electronic CHED.
Customs verifies the CHED and other requirements before deciding on free circulation.
The CHED connects official controls and customs.
The applicable EU rules determine how notification, checks and the finalised CHED interact with customs procedures.
Higher risk. Stricter entry conditions.
Certain food and feed of non-animal origin from specified third countries are subject to increased official controls, special entry conditions or suspension of entry. The applicable measure must be established for the exact product and country combination.
One regulation. Three different consequences.
Regulation (EU) 2019/1793 distinguishes temporary increased controls, special conditions and prohibited entry.
Increased official controls
Listed food and feed are subject to temporary increased official controls at entry into the Union.
- Product and country listing
- Documentary checks
- Identity and physical checks at the listed frequency
- Sampling and analysis where selected or required
Special entry conditions
Listed food and feed are subject to additional documentary conditions because of specified risks.
- Product and country listing
- Official certificate under Annex IV
- Third-country sampling and analysis results
- Consignment identification code
Suspension of entry
The listed food and feed cannot enter the Union under the suspension established by the regulation.
- Check the exact product description
- Verify origin and applicable CN/TARIC codes
- Review the current suspension
- Do not arrange entry contrary to the measure
What changes between the annexes?
| Requirement | Annex I | Annex II | Annex IIa |
|---|---|---|---|
| Regulatory effect | Increased controls | Special conditions | Entry suspended |
| BCP / authorised control route | Required | Required | Entry prohibited |
| CHED-D | Required | Required | Not an entry solution |
| Official certificate under 2019/1793 | Not required solely by Annex I | Required | Does not remove suspension |
| Third-country analytical results | Not required solely by Annex I | Required | Do not remove suspension |
| Identity / physical controls | Annex frequency | Annex frequency | Not applicable as an entry route |
The listed commodity, CN code, any TARIC subdivision, country of origin or dispatch, risk and control frequency determine the applicable requirements. Other EU rules may impose additional conditions.
The product name is only the beginning.
Identify the exact regulatory entry.
A general description such as “nuts” or “spices” is not sufficient to determine whether increased controls apply.
Product description
Match the goods to the precise annex description.
CN / TARIC
Check the listed classification and any “ex” limitation.
Country
Verify origin and any separate dispatch-country condition.
Hazard
Identify the risk triggering the measure.
Control frequency
Read the percentage specified for identity and physical checks.
Where a CN code is preceded by “ex”, the measure concerns only the specified goods within that code, not necessarily every product classified under it.
Four elements that must match.
For goods covered by Annex II, the documentary package must be prepared before the shipment leaves the relevant third-country control.
Official certificate
The competent third-country authority issues the official certificate using the model in Annex IV.
ARTICLE 11Sampling and analysis results
Results must concern the actual consignment and meet the applicable sampling, analytical and accreditation rules.
ARTICLE 10Consignment identification code
The code links the consignment to its packaging, certificate and analytical documentation, subject to the applicable packaging rules.
ARTICLE 9CHED-D
The responsible operator submits the required entry information, and the competent authority records the official control decision.
REGULATION 2017/625Check the dates before dispatch.
Article 11 provides that the official certificate is valid for no more than four months after issue and, in any case, no longer than six months after the relevant laboratory analysis results. The specific conditions of the current regulation must always be checked.
A control percentage is not an exemption.
Example only — not a current frequency assigned to a particular product or country.
What does a 20% control frequency mean?
The applicable identity and physical checks are carried out at the prescribed overall frequency for consignments within that annex entry.
It does not mean that the remaining consignments are exempt from prenotification, documentary controls, CHED requirements or the applicable entry conditions.
Different hazards. Different evidence.
Mycotoxins
Contamination risks such as aflatoxins in susceptible commodities.
Pesticide residues
Compliance with applicable maximum residue levels under EU legislation.
Microbiological risks
Hazards such as Salmonella where specifically identified in the measure.
Other specified hazards
Plant toxins, unauthorised dyes or other contaminants identified in the current annexes.
The high-risk import verification sequence.
Confirm the full commodity description and classification.
Check the current Annex I, II and IIa listings.
Verify the relevant origin and dispatch-country rules.
Identify the applicable risk and control frequency.
For Annex II, validate certification, analysis and identification codes.
Confirm BCP or authorised control-point arrangements and CHED-D.
Check the final CHED decision before customs release.
Always use the current consolidated text.
The annexes are periodically reviewed. Never rely on an old product list or an earlier control frequency when planning a new import.
When a shipment fails the controls.
A failed official control can interrupt the entire import operation. EU law distinguishes a suspected infringement from confirmed non-compliance and establishes specific measures for consignments refused entry.
Suspicion is not confirmation.
Suspected non-compliance
Where there are grounds to suspect that a consignment does not comply with applicable rules, the competent authority performs official controls to confirm or eliminate that suspicion.
Confirmed non-compliance
Where a consignment entering the Union is found not to comply with the relevant rules, the competent authority must detain it and refuse its entry.
An analytical result still pending, an inconsistent certificate or a suspected contamination does not automatically mean that destruction is required. The competent authority must first establish the relevant facts and apply the appropriate legal procedure.
From control finding to enforcement decision.
A simplified operational map for consignments controlled at EU entry.
Potential non-compliance identified
Documentary discrepancy, identity mismatch, physical finding or analytical concern.
Does the consignment comply?
Further checks or testing may be necessary to establish the facts.
Proceed under the applicable rules
The competent authority may finalise the relevant control decision. Customs release remains a separate step.
Refusal of entry and official measures
The consignment remains detained. The competent authority orders the appropriate measure.
What can happen to the goods?
The appropriate measure depends on the type of non-compliance, the risk involved and the conditions established by EU law.
Destruction
The authority may order destruction where appropriate. Destruction must comply with the applicable rules protecting health and the environment.
ART. 66(3)Re-dispatch
The authority may order re-dispatch outside the Union where the conditions of Article 72 are met, including destination-country acceptance.
ARTS. 66 AND 72Special treatment
Certain consignments may undergo authorised treatment or processing, provided the legal requirements and authority’s directions are met.
ARTS. 66 AND 71The operator must comply with the measure ordered by the competent authority. Re-dispatch and special treatment are subject to specific conditions and may not be available for every type of risk.
When the test result changes the shipment.
Contaminants, residues and microbiological risks.
A non-compliant laboratory result can establish that a consignment does not meet EU safety requirements. The authority evaluates the result against the applicable legal limit, analytical method and official sampling framework.
A consignment of food listed under increased controls is sampled for a regulated contaminant. If official analysis establishes non-compliance, the competent authority determines the appropriate enforcement measures.
Sampling
Official samples are collected under the applicable procedures.
Analysis
The laboratory determines the relevant analytical result.
Assessment
The authority assesses compliance and any applicable uncertainty rules.
Decision
The authority records its finding and orders any necessary measures.
Article 35 of Regulation 2017/625 provides a right to a second expert opinion, at the operator’s expense and subject to the applicable conditions. It does not automatically suspend protective measures or guarantee a second laboratory analysis.
The compliance failure becomes an operational cost.
Who pays for enforcement?
Measures ordered under the relevant provisions are applied at the expense of the operator responsible for the consignment.
Illustrative cost categories; actual liability and charges depend on the applicable measures and arrangements.A maximum statutory period, not a guaranteed grace period.
The operator must carry out ordered measures without delay and, at the latest, within 60 days of notification. The authority may set a shorter period. A limited extension may apply for a second expert opinion under Article 69(3).
The consequences extend beyond the physical goods.
Certificates and supporting documents
Under Article 68, the competent authority invalidates official certificates and, where appropriate, other relevant documents for consignments subject to the specified enforcement measures.
Controlled implementation
The competent authority supervises the ordered measures to prevent adverse effects on health, animal welfare or the environment.
No ordinary release following refusal
A negative official control decision cannot be bypassed by submitting an ordinary customs declaration. Customs must respect the relevant authority decision and restrictions.
What to do when a shipment is detained.
Identify the authority, consignment and relevant CHED reference.
Establish whether the finding is a suspicion or confirmed non-compliance.
Obtain the official findings, applicable legal basis and any analytical results.
Assess available procedural rights, including Article 35 where applicable.
Review the authority’s ordered measure, deadline and conditions.
Coordinate storage, transport, customs formalities and authorised execution.
Retain the decision and evidence of completion for future compliance reviews.
Enforcement follows a legal procedure.
Always assess the authority’s decision against the applicable legislation and the facts of the consignment.
Before the goods move.Know what must be cleared.
Food and feed imports require more than correct tariff classification. Product-specific safety rules, country approvals, official certificates, border controls and customs formalities must be assessed together.
Eight checks before dispatch.
A practical sequence for importers, customs teams and freight forwarders.
Identify the goods precisely
Confirm composition, intended use, processing, species where relevant, CN classification and the applicable EU product rules.
Verify origin and third-country eligibility
Check country and, where required, establishment approval, product restrictions and any specific import authorisation conditions.
Check current high-risk measures
Review Regulation 2019/1793, including Annexes I, II and IIa, and any separate emergency measures affecting the consignment.
Identify certificates and supporting records
Establish whether official certification, laboratory reports, traceability information or other documents must accompany the goods.
Confirm the entry route
Where mandatory border controls apply, choose a BCP designated for the category and verify any authorised control-point arrangements.
Arrange TRACES NT notification
For consignments requiring a CHED, ensure the responsible operator submits the relevant information within the applicable prior-notification deadline.
Prepare for official controls
Allow for documentary checks, possible identity and physical controls, sampling, storage requirements and associated costs.
Coordinate the customs declaration
Where required, ensure the finalised CHED and other supporting documents are available and the competent authority’s decision permits the intended customs procedure.
Not every food or feed consignment requires a CHED or BCP presentation. Article 44 of Regulation 2017/625 also provides for risk-based official controls on goods outside the mandatory BCP categories. Determine the applicable route before preparing the shipment.
Questions that matter in real import operations.
Does every food import require a CHED?+
What is the difference between CHED-P and CHED-D?+
Is an invoice sufficient for importing food into the EU?+
Are all food imports from a listed country subject to increased controls?+
Does Annex I of Regulation 2019/1793 require an official certificate?+
Can goods be released while laboratory results are pending?+
Can customs release goods if the CHED has not been finalised?+
What happens when official controls identify non-compliance?+
Who is responsible for what?
Importer and responsible operator
Establish product compliance, provide accurate information, arrange the required certification and ensure the relevant notifications and presentations are completed.
Competent authority
Perform official controls, evaluate the evidence, record the relevant decision and impose enforcement measures where legally required.
Customs authorities
Apply customs legislation and verify that the applicable official-control decision and restrictions are respected before allowing the relevant customs procedure.
A customs representative or freight forwarder may assist with documentation and procedures, but the allocation of legal obligations depends on the applicable food, feed and customs rules and on the role actually performed.
Connected rules. Different control systems.
Food and feed requirements may overlap with animal health, plant health, product safety and other import restrictions.
Official sources for further verification.
The applicable requirements may change through amendments, implementing acts and emergency measures. Consult the current consolidated legislation before shipment.