Customs Explorer
⌕

Customs Explorer

Plant health controls

EU PLANT HEALTH / IMPORT COMPLIANCE

Plant Health Controls

Before a plant crosses the border, its phytosanitary status matters.

Understand EU import prohibitions, phytosanitary certificates, border inspections and the CHED-PP process for plants, plant products and other regulated objects entering the European Union.

Import prohibitions Phytosanitary certificates CHED-PP / TRACES Official controls
PHYTOSANITARY INSPECTION EU / ENTRY
PEST-RISK SCREENING EU PHYTO / 01
DOCUMENT PHYTO CERTIFICATE Where required
ENTRY CONTROL CHED-PP Where applicable
01 / ACCESS

Is entry permitted?

Check prohibitions and temporary phytosanitary measures before dispatch.

02 / DOCUMENTATION

Is certification required?

Identify the applicable phytosanitary certificate and special requirements.

03 / BORDER CONTROL

What happens at entry?

Determine whether BCP inspection, TRACES notification and CHED-PP apply.

Scope note

Phytosanitary requirements are distinct from food safety, pesticide-residue and customs requirements. A product may be subject to more than one regulatory control system.

IMPORT ELIGIBILITY / EU PLANT HEALTH LAW

Not every plant can enter the Union.

Before arranging transport or obtaining a phytosanitary certificate, determine whether the precise plant, plant product or other regulated object is legally eligible for entry from its country of origin.

THREE REGULATORY OUTCOMES

Prohibited. Conditional. Subject to verification.

01 / PROHIBITEDSTOP

Import prohibition

The specified goods cannot be introduced from the listed countries or areas, unless a legally applicable exception or derogation permits entry.

REGULATION 2019/2072 · ANNEX VI
02 / CONDITIONALCHECK

Special phytosanitary requirements

Entry is possible only where the applicable conditions are satisfied, such as official statements, pest-free production areas, inspections or treatments.

REGULATION 2019/2072 · ANNEX VII
03 / ASSESSMENTVERIFY

Other applicable controls

Where no specific prohibition applies, check certification, border inspection and any additional product-specific or emergency measures.

REGULATIONS 2016/2031 AND 2017/625
Important: Absence from Annex VI does not establish unrestricted admissibility. Other EU acts may prohibit entry or impose additional conditions.
ANNEX VI / PROHIBITED INTRODUCTION

Read the entire legal entry.

Annex VI of Implementing Regulation 2019/2072 identifies regulated goods together with the relevant countries or geographical areas. Its scope is more precise than a generic product name.

ANNEX VI / REGULATORY SCREEN
01Botanical identity

Genus, species and the exact goods description.

02Product form

Plants for planting, seeds, fruits, wood or other specified material.

03Geographical scope

Originating country, country group or designated area.

04Legal qualifications

Exclusions, exceptions, amendments and separate measures.

ANNEX VII / SPECIAL REQUIREMENTS

Permitted entry may still require specific evidence.

01

Pest-free area

Official evidence that the goods originate from an area meeting the prescribed pest-free conditions, where this is an available legal option.

02

Production-site controls

Inspection, registration or supervision of the production site when required by the applicable annex entry.

03

Specified treatment

Officially recognised treatment or processing where the relevant provision permits this compliance route.

04

Additional declaration

Specific official statements recorded on the phytosanitary certificate where required by the legal provision.

Do not select a compliance option arbitrarily.

Some annex entries provide alternative ways to satisfy the requirement; others impose cumulative conditions. Follow the precise wording applicable to the goods and origin.

REGULATION 2018/2019 / HIGH-RISK PLANTS

A separate restriction pending risk assessment.

HIGH-RISK PLANT LIST

Temporary prohibition until the relevant risk has been assessed.

Implementing Regulation 2018/2019 identifies plants, plant products and other objects considered high risk under Article 42 of Regulation 2016/2031.

The list is amended as assessments are completed. Some entries contain narrowly defined exclusions for particular species, ages, forms or origins.

01

Check whether the botanical taxon is listed.

02

Read the product form and third-country scope.

03

Verify any specific exclusion or later amendment.

04

Do not treat a phytosanitary certificate as permission to bypass a prohibition.

QUARANTINE PESTS / ANNEXES II AND IV

Understand which pest status applies.

ANNEX II

Union quarantine pests

Lists Union quarantine pests, including priority pests identified in separate legislation. Their introduction, movement, holding, multiplication or release is subject to the applicable prohibitions and obligations.

EU-WIDE PHYTOSANITARY PROTECTION
ANNEX IV

Protected-zone quarantine pests

Identifies pests regulated in particular protected zones. Requirements may differ according to the destination within the Union.

DESTINATION-SPECIFIC PROTECTION
Related but different: Annex III covers regulated non-quarantine pests (RNQPs) and their relevant host plants. They are not legally interchangeable with Union quarantine pests.
IMPORTER WORKFLOW

Screen the shipment before booking transport.

01

Identify the botanical name, commodity form and intended use.

02

Confirm origin, dispatch country and intended EU destination.

03

Check Annex VI and Regulation 2018/2019 for prohibitions.

04

Check Annex VII and any separate emergency or temporary measures.

05

Assess relevant quarantine pests and protected-zone restrictions.

06

Only then determine certification, BCP and CHED-PP requirements.

OFFICIAL EU SOURCES

Check the current annexes before every shipment.

Plant-health lists and special requirements are amended over time. A previous successful import does not establish eligibility for a new shipment.

DOCUMENTARY COMPLIANCE / EU PHYTOSANITARY IMPORTS

The certificate is not just another shipping document.

A phytosanitary certificate is an official statement of plant-health compliance. Its legal scope, content, additional declarations and issuing conditions must match the actual consignment.

ISSUED BY

Third-country plant protection authority

The certificate is issued by the competent authority of the exporting or re-exporting country in accordance with the applicable EU and international requirements.

CONFIRMS

Compliance with phytosanitary rules

It certifies the relevant pest-related requirements and applicable special conditions for the goods concerned.

DOES NOT REPLACE

Entry authorisation or official controls

A certificate cannot override an import prohibition or substitute for mandatory BCP controls and a CHED-PP.

REGULATION 2019/2072 / ANNEX XI

Determine whether certification is mandatory.

Article 11 and Annex XI distinguish specifically listed commodities, the general requirement for other plants and defined exceptions.

APART A

Specifically listed goods

Plants, plant products and other objects listed with their relevant countries of origin or dispatch and CN descriptions.

ARTICLE 72 / REGULATION 2016/2031
BPART B

Other plants

Plants covered by the general certificate requirement under Article 73, with their corresponding CN codes.

ARTICLE 73 / REGULATION 2016/2031
CPART C

Specified exceptions

Plants for which the Article 73 certificate requirement does not apply, subject to the precise scope of the listed exception.

ARTICLE 73 / REGULATION 2016/2031
ADDITIONAL DESTINATION CHECK

Protected zones may introduce another requirement.

Article 74 of Regulation 2016/2031 and Annex XII of Regulation 2019/2072 address phytosanitary certification for specified goods entering particular protected zones from third countries.

PZ
ARTICLE 71 / CERTIFICATE CONTENT

What must the certificate communicate?

OFFICIAL PHYTOSANITARY CERTIFICATE SCHEMATIC
Certificate for export
Exporting authorityOfficial issuing body
Consignment partiesExporter / consignee
Goods identificationBotanical name / quantity / origin
Declared compliancePhytosanitary certification statement
Additional declarationRequired legal wording, if applicable
AuthenticationOfficial issue and validation
ILLUSTRATIVE LAYOUT — NOT A VALID CERTIFICATE
01

Correct identity

Names, quantities, botanical descriptions and origin must be consistent with the goods and accompanying records.

02

Correct official statement

The certification must address the relevant pest requirements and special import conditions.

03

Correct issuing framework

Export and re-export certificates follow the applicable formats and documentary rules under Annex V.

04

Correct timing

Article 76 sets an issuance-timing condition linked to departure from the issuing third country.

ADDITIONAL DECLARATIONS

When the standard certificate is insufficient.

LEGAL REQUIREMENT / ARTICLE 71(2)

Specific phytosanitary conditions must be expressly certified.

Where the applicable EU rules require an additional declaration, the relevant information must be included in the phytosanitary certificate. It may identify the precise special requirement fulfilled and the corresponding official statement.

Document review principle

Check the current wording of the applicable EU measure. A generic statement such as “goods are healthy” does not automatically satisfy a specific additional-declaration requirement.

01

Identify the applicable Annex VII or other special measure.

02

Determine which official compliance option is being used.

03

Check that the certificate contains the required declaration.

04

Verify consistency with origin, botanical identity and supporting evidence.

ARTICLE 76 / CERTIFICATE ACCEPTANCE

Validity depends on more than a signature.

LANGUAGE

EU official language

The certificate must be issued in at least one official language of the European Union.

ADDRESSEE

EU plant protection organisation

It must be addressed to the national plant protection organisation of a Member State.

ISSUANCE TIMING
14 DAYS

Before departure

The certificate must have been issued no more than 14 days before the goods left the third country in which it was issued.

Re-export is different. A phytosanitary certificate for re-export must meet the applicable requirements and be accompanied by the original export certificate or a certified copy, as required by Article 76.
EXCEPTIONS / DOCUMENT TYPES

Four distinctions that prevent documentation errors.

01

Certificate exemption is not an import exemption

Goods exempt from phytosanitary certification may still be subject to other EU rules, restrictions or controls.

02

Travellers do not have a general small-quantity exemption

Article 75 provides for narrowly defined exceptions under specified conditions. Do not assume that personal luggage or small quantities are automatically exempt.

03

Plant passports are not import certificates

Plant passports generally concern regulated movements within the Union and cannot be used as a substitute for an import phytosanitary certificate.

04

CHED-PP is a separate official-control document

Where Article 47 border controls apply, the operator must also follow the TRACES/CHED-PP process. The certificate and CHED-PP serve different functions.

PRE-DISPATCH DOCUMENT REVIEW

Verify the file before the goods leave.

01

Confirm that the goods are not prohibited under applicable EU legislation.

02

Determine certificate requirements using Annex XI and, if relevant, Annex XII.

03

Check the official issuer, certificate format, language and issue date.

04

Match botanical identity, origin, quantity and consignment particulars.

05

Verify additional declarations and any required special-treatment evidence.

06

For re-export, check the supporting original certificate or certified copy.

07

Arrange BCP presentation and CHED-PP prior notification where required.

PRIMARY LEGAL REFERENCES

Documentation must follow the current EU rules.

Use the latest consolidated legislation and verify any additional commodity-specific or emergency requirements.

BORDER OPERATIONS / OFFICIAL PLANT HEALTH CONTROLS

From arrival to release. Every decision has an owner.

For consignments subject to mandatory border controls, EU plant-health clearance follows a defined sequence: designated entry point, prior notification, official examination, CHED-PP decision and customs coordination.

01DESIGNATED BCPEntry planning
02TRACES NTPrior notification
03OFFICIAL CONTROLSAuthority checks
04CHED-PPFinal decision
05CUSTOMSPermitted procedure
STEP 01 / BORDER CONTROL POST

Choose a BCP authorised for the goods.

A border control post must be designated for the relevant category of plants, plant products or other objects. A convenient port or airport is not automatically an eligible phytosanitary entry point.

BEFORE ROUTING THE SHIPMENT

Confirm the entry point before transport is booked.

01

Confirm whether Article 47(1) mandatory border controls apply.

02

Check the Member State’s current list of designated BCPs.

03

Verify the BCP’s designation for the relevant commodity category.

04

Check operating hours, handling arrangements and inspection facilities.

STEP 02 / TRACES NT

Prior notification starts the official-control process.

OPERATOR RESPONSIBLE FOR THE CONSIGNMENT

Complete and submit Part I of the CHED-PP.

The operator responsible for the consignment enters the required consignment information in TRACES NT, or the applicable interoperable system, for transmission to the competent authority before arrival.

Notification does not constitute a favourable official-control decision or authorisation for release.

STANDARD PRIOR NOTIFICATION 1 working day

At least one working day before the consignment’s expected arrival.

PERMITTED LOGISTICAL DEROGATION 4 hours

A competent BCP authority may apply a minimum four-hour period where logistical constraints prevent the standard deadline.

Special timber arrangements

For certain BCPs designated for unprocessed logs and sawn or chipped wood, a prior-notification period of up to five working days may apply under Regulation 2019/1013.

STEP 03 / OFFICIAL PHYTOSANITARY CONTROLS

Three types of checks. Different purposes.

01
DOCUMENTARY CHECK

Are the documents compliant?

The competent authority examines required certificates, official attestations and relevant accompanying documents.

CERTIFICATE / DECLARATIONS / RECORDS
02
IDENTITY CHECK

Do the goods match the documents?

The authority verifies that the consignment’s identity, description and relevant characteristics correspond to the supporting records.

GOODS / LABELS / CONSIGNMENT IDENTITY
03
PHYSICAL CHECK

Are phytosanitary conditions met?

Where required, examination may include visual inspection, sampling or laboratory testing for regulated pests.

INSPECTION / SAMPLING / ANALYSIS
Control frequency matters.

Documentary, identity and physical checks do not necessarily occur at the same frequency. The applicable EU rules determine the controls and any permitted reduced-frequency arrangements. A shipment should never be treated as exempt merely because a previous consignment was not physically inspected.

STEP 04 / OFFICIAL DECISION

The competent authority finalises the CHED-PP.

OFFICIAL CONTROL RESULTS

Decision recorded in the CHED-PP

The authority completes the relevant decision fields after the necessary controls and results are available.

COMPLIANT

Favourable decision

The finalised CHED-PP confirms compliance with the relevant official-control requirements, allowing the customs procedure indicated by the authority to be considered.

NON-COMPLIANT

Restrictive decision

The authority may order refusal of entry, destruction, special treatment or re-dispatch, subject to the applicable legal provisions and circumstances.

A CHED reference number is not proof of release.

A notification submitted by the operator is not equivalent to a duly finalised CHED-PP recording the competent authority’s decision.

STEP 05 / CUSTOMS COORDINATION

Regulatory clearance and customs clearance must align.

PLANT HEALTH AUTHORITY

Determines phytosanitary compliance

Performs official controls, records the decision and specifies the permitted handling of the consignment.

OUTPUT / FINALISED CHED-PP
CUSTOMS AUTHORITY

Applies customs requirements

Ensures that the relevant CHED decision is respected and that the consignment is eligible for the requested customs procedure.

OUTPUT / CUSTOMS DECISION
57
REGULATION 2017/625 / ARTICLE 57

Release for free circulation requires the relevant favourable CHED decision.

For consignments covered by Article 47(1), customs authorities may generally allow release for free circulation only upon presentation of a duly finalised CHED confirming compliance, subject to the exemptions and special arrangements provided by law.

OPERATING RESPONSIBILITIES

Who performs each action?

ACTIONPRIMARY ROLE
Verify admissibility and required documentationImporter / relevant operator
Arrange entry through an appropriate BCPOperator responsible for the consignment
Submit prior notification / CHED-PP Part IOperator responsible for the consignment
Perform phytosanitary official controlsCompetent authority
Record the official decision / finalise CHED-PPCompetent authority
Apply customs procedures and release conditionsCustoms authority

A freight forwarder or customs representative may perform tasks on behalf of an operator, but the applicable legal obligations depend on the actual role and representation arrangements.

OFFICIAL LEGAL SOURCES

Border-control decisions follow EU legislation.

Consult the current consolidated texts and the relevant Member State authority’s operational instructions.

PRACTICAL IMPORT CASES / RISK PREVENTION

Same border. Five very different shipments.

A phytosanitary import assessment cannot be completed from a commercial product description alone. These practical scenarios show which questions must be answered before goods leave the exporting country — and what can go wrong when they are not.

05
Operational scenarios, not blanket classifications

Each example is illustrative. The actual result depends on botanical identity, commodity form, origin, destination, applicable derogations and the legislation in force on the date of importation.

CASE STUDY 01 PLANTS FOR PLANTING LIVE PLANTS / NURSERY STOCK
HIGH REGULATORY SENSITIVITY PRE-DISPATCH CHECK ESSENTIAL

Live plants from a third-country nursery

An EU importer orders rooted ornamental plants for resale to garden centres.

What must be checked?

  • Exact genus, species and plant form.
  • Annex VI import prohibitions.
  • Regulation 2018/2019 high-risk plant restrictions.
  • Annex VII special phytosanitary requirements.
  • Phytosanitary certificate and applicable BCP controls.
COMMON ERROR

Assuming the certificate makes the plant admissible.

A valid certificate does not override a prohibition. An excluded species, age category or production condition must be supported by the precise applicable legal provision.

OPERATIONAL RULE

Confirm legal eligibility before the supplier prepares the shipment.

CASE STUDY 02 FRESH FRUIT EDIBLE PLANT PRODUCTS
CERTIFICATION SCREENING OVERLAPPING CONTROLS

Fresh fruit intended for the EU market

An importer purchases fresh fruit from a supplier outside the European Union.

What must be checked?

  • Botanical species and country of origin.
  • Annex XI certificate requirements or exemptions.
  • Applicable pest-related special requirements.
  • Whether mandatory border phytosanitary controls apply.
  • Separate food-safety and residue-control requirements.
COMMON ERROR

Treating every fruit as subject to identical rules.

Annex XI Part C identifies specific fruit exemptions from phytosanitary certification, including bananas, pineapples, coconuts, durians and dates. The precise listed product scope must be checked.

OPERATIONAL RULE

A phytosanitary certificate exemption does not eliminate separate food or customs requirements.

CASE STUDY 03 WOOD PRODUCTS LOGS / SAWN WOOD / PACKAGING
PRODUCT FORM MATTERS PEST-RISK CONTROLS

Wood arriving by sea freight

A shipment contains sawn wood, while pallets and wooden supports are used to secure the cargo.

What must be checked?

  • Wood species and country of origin.
  • Whether the wood is sawn, treated, bark-bearing or otherwise processed.
  • Applicable Annex VI, VII and XI entries.
  • Any treatment or additional-declaration requirement.
  • Separate ISPM 15 requirements for wood packaging material.
COMMON ERROR

Confusing the commodity with its packaging.

Wood imported as a commercial product and wood packaging material supporting other goods may be subject to different phytosanitary provisions. An ISPM 15 mark is not a substitute for all commodity-specific requirements.

OPERATIONAL RULE

Assess the wood commodity and any regulated packaging material separately.

CASE STUDY 04 SEEDS SOWING / OTHER INTENDED USES
BOTANICAL CLASSIFICATION INTENDED USE

Seeds imported for commercial distribution

A trader orders seeds from a third country for distribution to agricultural customers.

What must be checked?

  • Species and exact seed category.
  • Whether phytosanitary certification is required.
  • Applicable quarantine-pest and RNQP rules.
  • Relevant Annex VII requirements.
  • Separate seed-marketing and quality legislation, if applicable.
COMMON ERROR

Assuming all seeds follow the same import route.

The treatment of seeds varies according to the species, intended use and applicable legal entries. Requirements for seeds should not be inferred automatically from those applying to other plants for planting.

OPERATIONAL RULE

Classify the seeds botanically and legally before requesting the supplier’s documentation.

CASE STUDY 05 DOCUMENT FAILURE BORDER NON-COMPLIANCE
OFFICIAL DETENTION RISK AUTHORITY DECISION REQUIRED

The certificate does not match the shipment

During official controls, the authority identifies a material inconsistency between the phytosanitary certificate and the goods presented.

Immediate operational priorities

  • Identify the precise discrepancy and its legal relevance.
  • Preserve the original certificate and consignment records.
  • Contact the operator and competent authority promptly.
  • Provide supporting evidence when requested.
  • Follow the official decision before changing the goods’ destination or handling.
COMMON ERROR

Attempting to solve the problem only through customs.

Customs cannot override a phytosanitary refusal. The competent authority determines whether the issue can lawfully be resolved or whether the consignment must be refused entry and subjected to further measures.

OPERATIONAL RULE

Never assume that a replacement document or commercial explanation will automatically secure release.

WHEN AN OFFICIAL CONTROL FAILS

Detention is not the same as destruction.

A suspected discrepancy and a confirmed non-compliance are different procedural situations. The competent authority establishes the applicable response under EU law.

01
SUSPICION / ARTICLE 65

Official detention pending verification

Where non-compliance is suspected, the competent authority may hold the consignment while carrying out the necessary official controls.

02
CONFIRMED NON-COMPLIANCE / ARTICLE 66

Refusal of entry and official measures

A non-compliant consignment entering the Union is placed under official detention and refused entry. The authority orders the appropriate measures under the applicable provisions.

03
RISK TO PLANT HEALTH / ARTICLE 67

More restrictive risk-response measures

Where the consignment presents a relevant risk, the authority may order destruction or special treatment under the conditions established by law.

MEASURE A

Re-dispatch

Return or dispatch outside the Union where this measure is legally available and the relevant destination and supervision conditions are met.

MEASURE B

Special treatment

Treatment or processing under the conditions established by the competent authority and Article 71 of Regulation 2017/625.

MEASURE C

Destruction

Controlled destruction where ordered by the competent authority, including where necessary to address a plant-health risk.

Who pays?

The operator responsible for the consignment bears the costs of measures imposed under the relevant provisions of Regulation 2017/625. The available measure is not chosen unilaterally by the importer.

PREVENTABLE IMPORT ERRORS

Six mistakes worth eliminating before dispatch.

01

Using only the CN code

Ignoring botanical names, product form or geographical restrictions.

02

Checking only the certificate

Failing to screen for prohibitions and high-risk plant restrictions.

03

Overlooking additional declarations

Missing specific official statements required by Annex VII or another measure.

04

Booking the wrong entry point

Using a location without the necessary BCP designation for the goods.

05

Confusing TRACES submission with clearance

Assuming a CHED-PP reference means the authority has approved entry.

06

Ignoring overlapping legislation

Missing food safety, seed-marketing, wood-packaging or other applicable controls.

THE PRE-DISPATCH PRINCIPLE

Resolve the legal question before creating a logistics problem.

The most expensive phytosanitary mistakes are often made before the shipment departs: an inadmissible species is ordered, a special declaration is omitted, or a non-designated entry point is selected.

IDENTIFY → VERIFY → DOCUMENT → NOTIFY → PRESENT

Do not reverse this sequence.

FINAL IMPORT CHECK / PRACTICAL GUIDANCE

Plant health compliance. From first assessment to final clearance.

Use this operational framework to identify phytosanitary obligations, prepare the import file and coordinate official controls with customs. Each step must be checked against the rules applicable to the actual consignment.

01 / IMPORT READINESS

The 10-point phytosanitary import checklist.

Complete the first six checks before dispatch. Complete the remaining steps through arrival and release, where the relevant border-control requirements apply.

A
BEFORE DISPATCH

Establish legal eligibility

01–06
  1. 01
    Identify the goods precisely

    Record botanical name, product form, intended use, origin and relevant CN classification.

  2. 02
    Screen import prohibitions

    Check Annex VI of Regulation 2019/2072 and any applicable high-risk plant or emergency restrictions.

  3. 03
    Check special phytosanitary requirements

    Review Annex VII, protected-zone requirements where relevant and any commodity-specific measures.

  4. 04
    Determine certificate obligations

    Check Annex XI and, where applicable, Annex XII. Verify the issuing authority, format and additional declarations.

  5. 05
    Verify the permitted entry route

    Determine whether mandatory BCP controls apply and select a suitably designated entry point.

  6. 06
    Review the complete shipment file

    Compare certificates, invoices, packing lists, transport records and treatment evidence where required.

B
ARRIVAL & CLEARANCE

Complete the official process

07–10
  1. 07
    Submit prior notification

    Where required, complete CHED-PP Part I in TRACES NT within the applicable notification period.

  2. 08
    Present the consignment

    Make goods and supporting documents available for the prescribed official controls.

  3. 09
    Verify the authority’s decision

    Confirm the CHED-PP has been duly finalised and check any restrictions or conditions recorded.

  4. 10
    Coordinate customs release

    Request only a customs procedure compatible with the applicable phytosanitary decision and customs requirements.

This checklist is an operational aid, not a substitute for commodity-specific legal assessment. Not every plant product requires a phytosanitary certificate, BCP presentation or CHED-PP.

02 / FREQUENTLY ASKED QUESTIONS

Plant health import rules, explained.

Answers to common questions raised by importers, freight forwarders and customs teams.

Do all plants and plant products require a phytosanitary certificate?
No. Certificate obligations depend on the commodity and applicable legal provisions. Regulation 2016/2031 establishes the framework, while Annex XI of Regulation 2019/2072 identifies the relevant goods and exceptions. Additional requirements can apply to particular origins or protected zones.
Can a prohibited plant enter the EU if it has a valid certificate?
No. A phytosanitary certificate does not override an EU import prohibition. The admissibility of the particular plant, origin and product form must be established independently, including any applicable derogation.
Is a phytosanitary certificate the same as a CHED-PP?
No. A phytosanitary certificate is an official document issued under the applicable plant-health certification rules. A CHED-PP is used for the EU official-control process when the consignment falls within the relevant mandatory border-control requirements.
Does every plant shipment need to pass through a border control post?
No. The entry route depends on whether the consignment is subject to mandatory border controls under Article 47 of Regulation 2017/625 and the applicable implementing rules. Where a BCP is required, its designation must cover the relevant goods.
Who submits the CHED-PP in TRACES NT?
The operator responsible for the consignment must complete and submit the relevant CHED information for prior notification. An authorised representative may perform operational tasks on the operator’s behalf, depending on the arrangements and applicable rules.
Does a CHED-PP reference number mean the shipment is cleared?
No. Submission of a CHED-PP is different from its finalisation by the competent authority. For consignments covered by Article 47(1), Article 57 of Regulation 2017/625 governs the relationship between the finalised CHED and customs procedures.
What happens if a regulated pest is detected?
The competent authority assesses the finding and the applicable legal provisions. Measures may include official detention, refusal of entry, special treatment, destruction or another legally permitted response. The importer cannot independently choose to release or redirect the goods.
Are wood packaging materials covered by the same rules as imported timber?
Not necessarily. Wood packaging material used to support goods and timber imported as a commodity can fall under different phytosanitary requirements. ISPM 15 compliance must not be confused with all requirements applicable to commercial timber imports.
03 / RAPID DECISION GUIDE

Which question comes first?

GATE 01

Is the product legally admissible?

Check prohibitions, origin restrictions, high-risk plant measures and applicable exceptions.

If prohibited, do not proceed without a valid legal basis for entry.
GATE 02

Which phytosanitary requirements apply?

Identify certification, additional declarations, treatments and other commodity-specific conditions.

Resolve documentary requirements before dispatch.
GATE 03

Are mandatory border controls required?

Determine the correct BCP, prior notification and CHED-PP route, if applicable.

Plan the entry process before arranging transport.
GATE 04

Has the competent authority authorised the relevant outcome?

Verify the official decision and its compatibility with the intended customs procedure.

Only then complete the permitted customs clearance.
CUSTOMS EXPLORER / PLANT HEALTH CONTROLS

Identify the plant. Verify the origin. Confirm admissibility. Complete the official controls.

Educational guidance. Not an individual phytosanitary or customs clearance decision.