Customs Explorer
⌕

Customs Explorer

PoUS submissions

EU DIGITAL CUSTOMS SYSTEMS POUS GUIDE

PoUS Submissions. From proof request to registered customs status.

Learn how economic operators submit T2L, T2LF and Customs Goods Manifest proof requests through the EU Proof of Union Status system.

QUICK ANSWER

PoUS is the EU electronic system for managing proof of the customs status of Union goods. Operators submit the relevant proof data through the applicable trader portal. Depending on their authorisation and the procedure, the proof may require customs endorsement or may be registered without endorsement.

01 MAR 2024 T2L / T2LF deployment
15 AUG 2025 CGM deployment
EU-WIDE Electronic proof management
P
PoUS Proof of Union Status
EU SYSTEM
SUBMISSION WORKFLOW How proof enters PoUS
01
Prepare proof data Identify goods and select the proof type
✓
02
Submit via trader portal Send the request or registration data
↗
03
Customs processing Endorsement where required
◈
04
Registered proof & MRN Reference for subsequent presentation
✓
01 / OPERATIONAL WORKFLOW

How to submit proof
through PoUS.

Submitting proof of Union status involves more than entering shipment details. The operator must select the appropriate proof type, prepare accurate goods data and follow the applicable customs workflow.

One system.
Different submission routes.

The processing route depends on the proof type, the operator’s authorisations and the applicable customs rules.

01
BEFORE SUBMISSION

Confirm the need for proof

Establish whether documentary proof of Union customs status is required for the movement. Not every movement of Union goods requires a PoUS submission.

CHECK Goods status, movement route and available proof methods.
02
PROOF SELECTION

Choose T2L, T2LF or CGM

Select the appropriate electronic proof according to the goods movement and applicable legal conditions. T2L and T2LF are not interchangeable, and a Customs Goods Manifest follows its own data and procedural requirements.

CHECK Territorial context, proof type and relevant procedure.
03
DATA PREPARATION

Prepare the required information

Compile the applicable data elements describing the operator, goods and movement. Check that quantities, descriptions, references and supporting information are consistent with the commercial and transport records.

CHECK Required fields, data consistency and supporting evidence.
04
ELECTRONIC SUBMISSION

Submit through the applicable portal

Access the relevant PoUS trader interface using the applicable authentication and authorisation arrangements. Complete and submit the electronic request or registration according to the operator’s role.

CHECK Portal access, representative permissions and submission feedback.
05
PROCESSING & REFERENCE

Follow the outcome and retain the MRN

Where customs endorsement is required, the competent customs authority processes the request. Where the rules permit registration without endorsement, the corresponding registration workflow applies. Once registered, the proof can be identified by its MRN.

CHECK Final proof status, MRN and subsequent presentation requirements.
IMPORTANT DISTINCTION

Two different processing routes

A

Proof requiring customs endorsement

The request is submitted for processing by the competent customs authority. Registration of the endorsed proof follows the applicable customs decision and system workflow.

Customs involvement required
B

Proof registered under an authorisation

Certain authorised operators may register proofs without requesting customs endorsement for each individual proof, subject to the conditions and scope of their authorisation.

Authorisation conditions apply

The distinction above is a simplified operational explanation. The actual route depends on the applicable legislation, proof type and authorisation. An EORI number alone does not confer the right to register proofs without endorsement.

02 / DATA PREPARATION

Get the data right.
Before you submit.

Reliable PoUS submissions start with accurate, consistent information. The electronic proof must identify the relevant goods and support the demonstration of their Union customs status.

PROOF TYPE COMPARISON

Three proof types. Different contexts.

Proof type Typical context Preparation focus
T2L Union status proof Evidence of Union customs status where a T2L is an appropriate proof. Goods identification, relevant operator details and supporting information.
T2LF Special fiscal territories Movements involving territories where the specific T2LF rules apply. Correct territorial context, goods data and applicable fiscal-territory requirements.
CGM Customs Goods Manifest Manifest-based proof of Union status under the applicable PoUS rules. Relevant manifest, goods and transport information according to the required dataset.

This comparison describes the general purpose of each proof. It does not replace the official PoUS data specifications or determine whether a particular movement requires proof.

PRE-SUBMISSION REVIEW

Five areas worth checking.

These checks help identify inconsistencies before submitting proof data. They are not a substitute for the system’s mandatory validation rules.

01

Operator identification

Check the relevant economic operator details, EORI information where required and the authority of the person making the submission.

02

Goods description and identity

Ensure the goods can be identified through sufficiently clear descriptions and the applicable goods-level information.

03

Quantities and supporting records

Compare relevant quantities, packages and other declared particulars with available commercial or transport documentation.

04

Proof type and territorial context

Verify that the selected proof corresponds to the movement and that special fiscal territory rules have been considered.

05

Authorisation and submission route

Confirm whether the operator must request customs endorsement or is entitled to use an authorised registration procedure.

PRACTICAL PREPARATION AID

Your pre-submission checklist

Tick each item once reviewed. This checklist is for preparation only and does not transmit or validate a PoUS submission.

0/5 REVIEWED

Complete the review before proceeding to the official system.

LEGAL & TECHNICAL FRAMEWORK

Use the official specifications.

The Union Customs Code framework and the European Commission’s PoUS documentation govern the applicable procedures and data. Consult the current specifications for operational submissions.

03 / AFTER SUBMISSION

Submitted is not
the same as approved.

Once proof data has been submitted through PoUS, the next steps depend on the applicable processing route. Understanding the distinction between submission, endorsement, registration and presentation helps prevent incorrect assumptions about the status of a proof.

01
Submission Proof data transmitted
02
Processing System checks and, where required, customs review
03
Registration Proof registered with an MRN
04
Presentation Reference used when proof must be presented

Simplified conceptual sequence. Actual system statuses, processing steps and messages vary by proof type and applicable procedure. Presentation is a separate step and does not necessarily occur immediately after registration.

UNDERSTANDING THE OUTCOME

What should the operator verify?

01

Submission acknowledgement

Confirm that the electronic transmission was received and identify any validation errors or requests for correction. A successful transmission alone should not be treated as proof that the customs status has been established.

02

Customs endorsement, where required

Where the applicable procedure requires endorsement, the competent customs authority may examine the request and supporting information before the proof is registered. Operators should follow the actual outcome communicated through the system.

03

Registration and reference

Once the proof is registered, retain its MRN and verify the associated goods and reference details. The MRN identifies the electronic proof record; it does not independently establish that the goods satisfy every applicable customs requirement.

04

Subsequent presentation

Where proof of Union status must be presented, provide the relevant reference through the applicable process. The competent customs authority may verify the electronic record and its applicability to the goods concerned.

CRITICAL DISTINCTION

Registration, presentation and acceptance are not identical.

01

Registered proof

An electronic proof record exists in the applicable system and can be identified through its reference.

02

Presented proof

The relevant reference is provided for the goods and movement concerned, using the applicable presentation procedure.

03

Customs verification

The competent authority may assess the proof and its connection with the goods. Registration alone does not prevent further customs checks.

04 / EXCEPTIONS & OPERATIONAL RISKS

The details that
change the process.

PoUS submissions are not identical for every movement. Territorial rules, operator authorisations, proof selection and data quality can all affect how a request should be prepared and processed.

SPECIAL SCENARIOS

When the standard workflow needs a closer look.

These scenarios require additional attention. They do not automatically mean that a PoUS submission is mandatory.

01 / TERRITORY

Special fiscal territories

Movements involving territories with special fiscal arrangements require particular care. Check whether the T2LF rules apply rather than assuming that T2L is appropriate.

KEY QUESTION Is the movement covered by T2LF rules?
02 / ROUTING

Movements outside the EU customs territory

Where Union goods temporarily leave the customs territory, consider whether and how their Union status must be demonstrated when they return. The applicable rules depend on the movement and customs procedure.

KEY QUESTION How will Union status be evidenced?
03 / AUTHORISATION

Authorised issuer arrangements

Registration without individual customs endorsement is not a general right available to every EORI holder. Verify the relevant authorisation and its conditions before using an authorised procedure.

KEY QUESTION Does the authorisation cover this proof?
04 / DOCUMENTATION

Commercial and transport inconsistencies

Differences between submitted particulars and available shipment records may require clarification. Review the goods identity, quantities and relevant references before transmitting the proof data.

KEY QUESTION Can the declared goods be identified?
COMMON OPERATIONAL PROBLEMS

What can go wrong during submission?

01

Incorrect proof type

Selecting a proof that does not match the applicable movement or territorial rules.

PREVENTION Confirm the legal and territorial context.
02

Incomplete or inconsistent data

Missing required information or inconsistencies in the submitted goods particulars.

PREVENTION Review the applicable dataset and supporting records.
03

Access or representation issues

Problems involving authentication, trader access or permissions to act for an operator.

PREVENTION Verify access rights and representative arrangements.
04

Submission mistaken for registration

Assuming that a transmitted request has already produced a registered proof available for presentation.

PREVENTION Check the actual outcome and registered proof reference.
BEFORE TRYING AGAIN

Do not automatically submit a duplicate request.

If a transmission appears unsuccessful, first check the available system response and whether the original request was received or registered. The appropriate next action depends on the actual status and applicable correction procedure.

05 / FREQUENTLY ASKED QUESTIONS

PoUS submissions.
Questions answered.

Practical answers to common questions about submitting proof of Union customs status through the EU PoUS system.

01 What is a PoUS submission?
A PoUS submission is the electronic transmission of information relating to proof of the customs status of Union goods through the applicable PoUS interface. Depending on the proof type and operator’s authorisation, the process may involve a request for customs endorsement or an authorised registration procedure.
02 Is a PoUS submission required for every movement of Union goods?
No. Union customs status is not demonstrated through a PoUS submission for every movement. Whether proof is needed depends on the applicable customs status rules, movement and available means of proof. Operators should first establish whether documentary proof is required and which method is appropriate.
03 What is the difference between T2L and T2LF?
Both are means of proving the customs status of Union goods. T2LF is used in the specific situations covered by the rules for special fiscal territories, while T2L applies in other relevant circumstances. The appropriate proof must be determined from the movement and applicable territorial provisions.
04 Can every EORI holder register a proof without customs endorsement?
No. Having an EORI number does not automatically authorise an operator to register proofs without individual customs endorsement. The relevant simplified arrangements require the applicable customs authorisation and compliance with its conditions.
05 Does successful submission mean the proof has been registered?
Not necessarily. Electronic submission and registration are distinct concepts. Where endorsement is required, the request may need customs processing before the proof is registered. Operators should check the actual system outcome rather than relying only on a transmission acknowledgement.
06 What is the MRN used for in PoUS?
The Movement Reference Number identifies a registered electronic proof and supports its subsequent presentation and verification through the applicable customs process. It is important to distinguish the MRN from confirmation that all other customs requirements have been met.
07 What should I do if a PoUS submission is rejected?
Examine the available system response and determine whether the issue concerns data validation, permissions, the selected procedure or customs processing. Check whether a record already exists before sending another request. The appropriate correction or resubmission route depends on the actual status and applicable system instructions.
08 Does PoUS also cover Customs Goods Manifests?
Yes. The PoUS system includes the Customs Goods Manifest (CGM) functionality introduced in its second deployment phase. CGM has its own applicable data and procedural requirements and should not be treated as identical to T2L or T2LF.
CUSTOMS EXPLORER / EU DIGITAL CUSTOMS

Better submissions begin
with better preparation.

Understand the proof requirements, prepare accurate information and verify the applicable procedures before using the official PoUS system.

Explore the official PoUS resources