Customs Explorer
⌕

Customs Explorer

EU CUSTOMS CLASSIFICATION DECISION

Binding Tariff Information (BTI)

When tariff classification needs legal certainty, a BTI provides an official decision from an EU customs authority on how specified goods are classified.

RESEARCH ≠ LEGAL DECISION
EU
EU CUSTOMS DECISION BINDING TARIFF INFORMATION
BTI
DECISION TYPE Tariff classification
SUBJECT
CLASSIFICATION
•••• •• ••
VALIDITY GENERALLY 3 YEARS
TERRITORIAL EFFECT European Union
ILLUSTRATIVE INTERFACE

Conceptual representation — not an EU form or official document.

01 QUICK ANSWER
WHAT IS A BTI?

An official tariff classification for specified goods.

A Binding Tariff Information decision is issued by an EU customs authority following an application. It establishes the tariff classification of the goods described in the decision and provides binding legal certainty under the conditions laid down by EU customs law.

01
ISSUED BY EU customs authority
02
SUBJECT Specified goods
03
VALIDITY Generally 3 years
04
EFFECT Binding throughout the EU
THE KEY DISTINCTION

Classification research gives you a conclusion. A BTI gives you a decision.

CLASSIFICATION RESEARCH
Product facts → CN + GIR + Notes → EU sources
OUTPUT Supported classification conclusion
≠
BTI DECISION
Application → Customs authority → Decision
OUTPUT Binding tariff classification
!

A tariff code found in TARIC, a supplier’s classification, professional advice or your own classification analysis is not the same thing as holding a BTI decision.

WHAT “BINDING” MEANS

The decision creates a two-way legal relationship.

Under the Union Customs Code, the decision binds customs authorities against the holder for goods whose customs formalities are completed after the decision takes effect. It also binds the holder against customs from the relevant date of notification.

PARTY A
EU
CUSTOMS AUTHORITIES
BOUND BY THE DECISION →
BTI SPECIFIED GOODS
← BOUND BY THE DECISION
PARTY B
H
DECISION HOLDER
CRITICAL CONDITION The declared goods must correspond to the goods described in the BTI decision.
BTI GOODS ↔ DECLARED GOODS MATCH REQUIRED
THE NEXT QUESTION When is a BTI actually worth requesting?
UNCERTAINTY → COMMERCIAL EXPOSURE → NEED FOR CERTAINTY → BTI?
02 DECISION POINT
WHEN DOES A BTI MAKE SENSE?

Not every classification question needs a binding decision.

The practical question is not simply whether classification is difficult. Consider how much uncertainty remains, how important the classification is to future operations, and what the consequences of getting it wrong could be.

BTI DECISION MATRIX UNCERTAINTY × EXPOSURE

A practical decision aid — not a legal test for eligibility.

HIGH CLASSIFICATION UNCERTAINTY LOW
REVIEW
HIGH UNCERTAINTY LOWER EXPOSURE Strengthen the classification analysis first.

Better technical information, legal research or specialist review may resolve the issue without requiring a BTI.

CONSIDER BTI
HIGH UNCERTAINTY HIGHER EXPOSURE Legal certainty may have significant value.

Repeated imports, material duty consequences or a commercially important classification can strengthen the case for considering a binding decision.

NORMAL ANALYSIS
LOW UNCERTAINTY LOWER EXPOSURE A BTI may add little practical value.

Where the classification is well supported and the operational exposure is limited, normal classification controls may be sufficient.

EVALUATE
LOW UNCERTAINTY HIGHER EXPOSURE Certainty can still matter even when the answer looks clear.

A high-volume or strategically important product may justify evaluating BTI even where the working classification appears strong.

LOWER OPERATIONAL EXPOSURE
COMMERCIAL / CUSTOMS EXPOSURE
HIGHER OPERATIONAL EXPOSURE
FOUR PRACTICAL SIGNALS

Look beyond “Is the code difficult?”

These factors do not automatically mean that a BTI should be requested. They help assess whether obtaining a binding classification decision could be proportionate to the issue.

01
UNCERTAINTY How stable is the classification?
CLEAR
DISPUTABLE

Competing headings, difficult GIR analysis or uncertain technical characteristics increase classification risk.

02
REPETITION Will the goods be imported repeatedly?
ONE-OFF
RECURRING

A decision may have greater operational value when the same goods are expected to appear across repeated transactions.

03
FINANCIAL EFFECT Does classification materially affect cost?
LIMITED
MATERIAL

Differences in customs duty or measures linked to competing classifications can increase the significance of certainty.

04
BUSINESS DEPENDENCY Does the business model rely on the result?
LOW
HIGH

Pricing, sourcing, product launches or long-term supply arrangements may depend on a stable classification position.

SCENARIO A BTI may be unnecessary
PRODUCT Well-defined standard product
CLASSIFICATION Strong legal support
TRANSACTIONS Limited / occasional
EXPOSURE Low
PRODUCT FACTS → CLASSIFICATION → VERIFY → USE
LIKELY APPROACH

Maintain a documented classification basis and verify the current nomenclature and relevant measures.

SCENARIO B BTI may deserve serious consideration
PRODUCT Technically complex goods
CLASSIFICATION Competing interpretations
TRANSACTIONS Recurring EU imports
EXPOSURE Material
UNCERTAINTY + REPETITION + EXPOSURE → BTI?
LIKELY APPROACH

Evaluate whether a binding decision would provide useful legal certainty before future transactions are undertaken.

!
IMPORTANT BTI is prospective — not a mechanism for rewriting the past.

A BTI decision does not normally determine the classification of customs formalities completed before the decision takes effect. If the concern relates to past declarations, that is a different customs-compliance question.

DECISION FLOW Should BTI enter the conversation?
01 Is the product information complete?
→
02 Is classification still uncertain or strategically important?
→
03 Will the classification matter for future transactions?
→
04 Evaluate BTI

This is a practical screening framework, not a substitute for the legal conditions governing a BTI application.

NEXT If BTI is appropriate, what information has to go into the application?
APPLICANT → GOODS → TECHNICAL EVIDENCE → APPLICATION FILE
03 APPLICATION FILE
PREPARING A BTI APPLICATION

Customs can only classify the product you actually describe.

A strong BTI application starts with identification of the goods, not with the commodity code you hope to obtain. The technical file should allow the customs authority to understand what the product is, how it is made, how it functions and which characteristics matter for classification.

BTI APPLICATION FILE PRODUCT IDENTIFICATION DOSSIER
COMPLETE BEFORE SUBMISSION
01
PRODUCT IDENTITY

Define exactly what goods the decision should cover.

The description must be specific enough for the goods to be recognised and distinguished from products whose characteristics could lead to a different classification.

COMMERCIAL NAME
MODEL / REFERENCE
PRODUCT TYPE
INTENDED TRANSACTION
02
TECHNICAL CHARACTERISTICS

Describe classification-relevant facts, not marketing language.

The relevant information depends on the product. Customs may need to understand composition, construction, function, operating principle, dimensions, presentation or other objective characteristics.

A Composition Materials, substances, percentages where relevant.
B Construction Components, assemblies and physical structure.
C Function What the goods objectively do.
D Operation How the product performs its function.
E Presentation Condition and configuration when presented to customs.
F Other decisive facts Characteristics relevant to the candidate headings.
03
SUPPORTING EVIDENCE

Turn the description into verifiable evidence.

Supporting material should help customs identify the goods and understand the technical characteristics relevant to classification.

Technical sheets Specifications and product data.
Images Clear views of the actual goods.
Manuals / brochures Where they explain relevant functions.
Samples Where appropriate and possible.
Other evidence Plans, analyses or relevant technical material.
04
CLASSIFICATION CONTEXT

Show customs the classification issue that needs to be resolved.

Where appropriate, the application file can clearly identify the nomenclature context, relevant candidate headings and the legal or technical issue behind the classification uncertainty.

PRODUCT FACTS Objective characteristics
→
LEGAL ISSUE Heading / Note / GIR question
→
REQUEST Binding classification
05
PUBLIC / CONFIDENTIAL INFORMATION

Treat confidentiality as part of the application file.

BTI information is stored in the European system and BTI decisions are made available publicly for transparency, while confidential information is protected. Information submitted with the application should therefore be identified and handled carefully.

PUBLIC DECISION DATA
CONFIDENTIAL INFORMATION
PROTECTED
APPLICATION SCOPE

One application should cover one classification problem.

EU rules allow goods with similar characteristics to be covered together where their differences are irrelevant for tariff classification. Materially different products should not be grouped merely because they belong to the same commercial range.

PRODUCT FAMILY
A1 A2 A3
Differences irrelevant to classification ONE APPLICATION MAY COVER
VS
DIFFERENT PRODUCTS
A B C
Classification-relevant differences SEPARATE APPLICATIONS
DESCRIPTION QUALITY

The difference between identifying a product and merely naming it.

INSUFFICIENT
COMMERCIAL DESCRIPTION “Electronic control unit”
Composition ?
Function ?
Operation ?
Configuration ?

A product name alone may not reveal the characteristics needed to determine classification.

ADD → TECHNICAL FACTS
CLASSIFIABLE FILE
TECHNICAL DESCRIPTION Product identified by objective characteristics
Composition DEFINED
Function DEFINED
Operation DEFINED
Configuration DEFINED

The authority can connect the physical product to the nomenclature and applicable classification rules.

AFTER SUBMISSION

Customs may need more information.

The BTI process is electronic. Where additional product information is needed during examination of the application, the authority can request it and the applicant can respond through the relevant electronic system.

01 APPLICATION Product file submitted
→
02 CUSTOMS REVIEW Information assessed
→
03 IF REQUIRED Further information requested
→
04 APPLICANT Evidence supplied
!
DATA QUALITY MATTERS Incomplete or inaccurate information can undermine the decision.

The Commission expressly warns applicants to provide accurate and complete information. A BTI decision based on incomplete or inaccurate information can be annulled.

PRE-SUBMISSION CHECK Could another customs professional identify the goods from this file without guessing?
01 Product identified
→
02 Technical facts documented
→
03 Evidence attached
→
04 Scope clearly defined
→
05 Ready to submit
NEXT The file is ready. What happens after the application is submitted?
SUBMIT → ACCEPTANCE → EXAMINATION → BTI DECISION
04 FROM APPLICATION TO DECISION
THE BTI PROCESS

Submission starts the process. It does not create the decision.

After an application is submitted, the competent customs authority examines whether the request can be accepted, assesses the goods and the applicable tariff rules and, where necessary, asks for additional information before issuing the BTI decision.

BTI CASE APPLICATION → CUSTOMS DECISION
ELECTRONIC PROCESS
01
SUBMISSION

Application enters the electronic BTI process.

The applicant submits the request and supporting product information through the applicable EU customs electronic environment.

INPUT Application file
CASE MOVES TO CUSTOMS
02
ACCEPTANCE PHASE

Customs checks whether the application can proceed.

Before the classification analysis reaches the decision stage, the authority verifies the application against the applicable conditions and determines whether it can be accepted.

CHECK Application conditions
ACCEPTED APPLICATION
03
CLASSIFICATION EXAMINATION

The goods are tested against the tariff nomenclature.

Customs examines the objective characteristics of the goods and applies the relevant nomenclature wording, legal Notes and General Rules for interpretation. Supporting classification material may also be relevant.

GOODS Technical facts
→
LEGAL TEXT CN + Notes + GIR
→
ANALYSIS Classification
INFORMATION SUFFICIENT?
NO ↓
REQUEST FOR ADDITIONAL INFORMATION Customs asks the applicant to complete or clarify the product file.
QUESTION → APPLICANT RESPONSE → CASE FILE UPDATED
RETURN TO EXAMINATION ↗
04
DECISION

Customs issues the Binding Tariff Information decision.

The decision identifies the goods and establishes their tariff classification. It becomes the legal reference for the goods covered by that decision under the applicable BTI rules.

OUTPUT BTI BINDING CLASSIFICATION
PROCEDURAL TIME

BTI is a formal process, not an instant tariff lookup.

EU customs legislation provides procedural periods for the acceptance and decision stages. The actual case can also be affected by requests for additional information, analysis of samples or other steps necessary to reach a classification.

APPLICATION Submitted
ACCEPTANCE 30 DAYS General UCC decision framework
ACCEPTED Case proceeds
DECISION PERIOD 120 DAYS From acceptance, subject to the applicable rules
BTI Decision issued
!

These periods should not be read as a guaranteed “150-day delivery time”. EU customs legislation contains rules that can affect procedural time in individual cases.

AFTER THE DECISION

A BTI is not something you simply archive.

When the goods covered by a valid BTI are declared, the decision becomes part of the customs classification workflow. The holder must use the decision in accordance with the applicable customs rules.

01 / GOODS
Goods presented for declaration
VERIFY → Do the goods correspond to the BTI?
02 / BTI BTI Valid decision
REFERENCE → Decision identified in the customs declaration
03 / DECLARATION
Classification applied
THE ESSENTIAL TEST Decision goods = declared goods

A BTI does not become a reusable classification certificate for vaguely similar products. The goods being declared must correspond to those described by the decision.

CUSTOMS DECLARATION

The BTI decision must be connected to the declaration.

Where a BTI decision is held for the goods being declared, the relevant decision reference is provided in the customs declaration in accordance with the applicable EU customs data requirements.

CUSTOMS DECLARATION CLASSIFICATION DATA
Commodity code
BTI decision reference
BTI / ••••••••••
LINKED
Additional data
CONCEPTUAL INTERFACE — NOT AN OFFICIAL EU CUSTOMS SCREEN
DECISION LIFECYCLE

Issued does not mean valid forever.

01 ISSUED Decision takes effect
VALID PERIOD
GENERALLY 3 YEARS
02 DURING VALIDITY Use for covered goods
BUT THE LEGAL ENVIRONMENT CAN CHANGE
MONITOR
03 END / CHANGE Decision no longer usable as before
A Normal expiry

The standard BTI validity period reaches its end.

B Nomenclature changes

Changes to tariff nomenclature can affect an existing classification decision.

C Legal developments

Certain EU or international classification measures can affect whether a decision remains valid.

D Decision-specific events

Revocation, annulment or other circumstances provided for by customs law may affect the decision.

!
DO NOT TREAT BTI AS A STATIC PDF Validity should be checked when the decision is relied upon.

Holding a copy of a BTI is not enough by itself. The product must still correspond to the decision and the decision must still be valid under the legal framework applicable at the time of the customs operation.

NEXT What can make a BTI cease to be valid — and what happens to ongoing contracts?
VALIDITY → LEGAL CHANGE → REVOCATION → EXTENDED USE?
05 VALIDITY & CHANGE
BTI LIFECYCLE

Three years is the general rule. Not an unconditional guarantee.

A BTI decision is generally valid for three years, but its legal life can end earlier. The reason matters: annulment, cessation of validity and revocation are different events and can have different consequences for the holder.

DECISION LIFECYCLE WHAT CAN HAPPEN TO A BTI?
UCC / ARTICLE 34
START BTI Decision issued

Valid classification decision for the goods covered.

DECISION REMAINS LEGALLY COMPATIBLE →
NORMAL PATH VALID Generally up to 3 years
BUT Something changes before normal expiry.
01 Application information was inaccurate or incomplete → ANNULMENT
02 The decision no longer conforms to legislation → CEASES TO BE VALID
03 The decision is no longer compatible with tariff interpretation → REVOCATION
01 ANNULMENT
PROBLEM IN THE ORIGINAL APPLICATION

The decision was based on inaccurate or incomplete information.

TRIGGER Information supplied by the applicant was inaccurate or incomplete.
→
LEGAL EFFECT BTI annulled
→
EFFECTIVE FROM Initial decision date

Annulment reaches back to the start of the decision. This is why accuracy and completeness in the original BTI application are fundamental.

02 CEASES TO BE VALID
THE LEGAL FRAMEWORK CHANGES

A correct decision can later stop conforming to the law.

EXAMPLE A Nomenclature change

A relevant CN or related nomenclature provision changes.

→
EXAMPLE B EU classification measure

A Commission measure determines the classification of the goods concerned.

→
RESULT Existing BTI can cease to be valid

The decision does not need to have been wrong when issued. A subsequent legal change can make the existing classification decision incompatible with the new legal position.

03 REVOCATION
INTERPRETATION CHANGES

The legal text may remain, while its interpretation develops.

CN / HS Explanatory Notes
CJEU Judgments
WCO Classification decisions or opinions
EU Commission action
NEW INTERPRETATIVE POSITION → EXISTING BTI NO LONGER COMPATIBLE → REVOCATION

Revocation can therefore occur even where the original application accurately described the goods. The relevant classification interpretation has moved.

IMPORTANT DISTINCTION

These are not three names for the same event.

ANNULMENT Problem with the basis on which the decision was issued LOOKS BACK
CEASES TO BE VALID Subsequent legal change makes the decision incompatible LEGAL CHANGE
REVOCATION Subsequent interpretative or other specified development NEW POSITION
EXTENDED USE

A decision may stop being valid while a commercial commitment is already running.

In certain cases, the UCC allows the holder to request continued use of a BTI that has ceased to be valid or has been revoked, where the decision was relied upon for a binding contract concluded before that event.

MAXIMUM STANDARD PERIOD 6 MONTHS

Subject to the conditions and exceptions laid down by EU law.

CONTRACT TIMELINE Why extended use exists
01 BTI VALID Trader relies on decision
BEFORE INVALIDATION Binding contract concluded
02 LEGAL EVENT BTI ceases / is revoked
IF CONDITIONS ARE MET Extended use requested
03 LIMIT Extended period ends
THE TEST Extended use is conditional.

It is not an automatic grace period attached to every BTI.

01 CONTRACT Binding contract based on the BTI

The contract must have been concluded before the BTI ceased to be valid or was revoked.

→
02 APPLICATION Holder requests extended use

The request is made to the customs authority that took the original decision.

→
03 DEADLINE Request within 30 days

The UCC sets a 30-day period from the cessation or revocation event.

→
04 AUTHORITY Extended use decision

Customs determines whether the conditions are satisfied and the permitted scope.

THE REQUEST IS SPECIFIC

The holder does not simply ask: “Can I keep using my BTI?”

The application for extended use identifies the quantities concerned and the Member State or Member States in which the goods will be cleared during the requested period.

EXTENDED USE REQUEST BTI / •••••••••
Decision
IDENTIFIED
Quantity
SPECIFIED
Member State(s)
SPECIFIED
Contract basis
DOCUMENTED
!

Six months is a maximum, not a universal entitlement. An applicable EU measure may exclude extended use or provide a shorter period. Where an import or export certificate is involved, specific timing rules also apply.

PRACTICAL CONTROL

A BTI portfolio needs monitoring, not filing.

For recurring imports or exports, the operational question is not simply whether a BTI exists. The business should know which goods it covers, when it expires and whether a legal or interpretative development has affected it.

CONTROL QUESTION STATUS
Product scope Are the imported/exported goods still identical to those covered by the decision? CHECK
Validity date Has the normal expiry date been reached? CHECK
Nomenclature Has the relevant CN structure or code changed? CHECK
Classification law Has a relevant measure or interpretative development occurred? CHECK
Decision status Is the BTI still shown as valid for the intended operation? VERIFY
BTI LIFECYCLE — PRACTICAL PRINCIPLE Legal certainty does not mean legal permanence.

A BTI provides a binding classification while it is valid and applicable to the goods concerned. Its status still has to be understood in the context of the legislation and classification framework in force.

NEXT Before relying on BTI, know where to verify decisions and the official rules.
FAQ → OFFICIAL SOURCES → NEXT ACTION
06 VERIFY & ACT
FROM GUIDANCE TO OFFICIAL INFORMATION

Understand the decision here. Verify it at the official source.

Customs Explorer explains how Binding Tariff Information works. Applications, individual BTI decisions and their legal status, however, belong to the official EU and national customs systems.

01
RESEARCH A DECISION

European Binding Tariff Information database

Search published BTI decisions to research how products have been classified across the European Union. The public database contains both valid and invalid BTI decisions, with confidential information protected.

PRODUCT → BTI SEARCH → DECISIONS → RESEARCH
Open official EBTI information
EUROPEAN COMMISSION OFFICIAL SOURCE
02
APPLY & MANAGE

EU Customs Trader Portal

The EU Customs Trader Portal provides access to EBTI services for economic operators using the EU system. Depending on the Member State, a national BTI portal may be used instead.

LOGIN → APPLICATION → CORRESPONDENCE → DECISION
Open EU Customs Trader Portal information
EU CUSTOMS OFFICIAL SERVICE
BTI
RESEARCH ≠ YOUR OWN BINDING DECISION Finding a similar BTI is useful evidence. It does not make that decision binding for you.

Product details matter. A published decision concerning apparently similar goods can help classification research, but it should not be treated as a substitute for analysing your own goods or obtaining a BTI decision addressed to you.

BTI FAQ

The questions that matter before you rely on a decision.

01 Is a BTI mandatory for importing goods into the EU?

No. A trader does not generally need to obtain a BTI simply because goods are being imported or exported. BTI is a mechanism for obtaining a binding advance decision on tariff classification when legal certainty is needed.

02 How long is a BTI valid?

The general validity period is three years from the date on which the decision takes effect. A decision can nevertheless be annulled, cease to be valid or be revoked earlier in the circumstances provided by EU customs legislation.

03 Is a BTI issued in one EU Member State valid throughout the EU?

Yes. BTI decisions are binding throughout the European Union within the conditions laid down by the Union Customs Code. The holder must also use the decision for the goods concerned.

04 Can I use another company’s published BTI?

A published BTI can be valuable classification research, but the binding relationship applies to the holder of that decision and the customs authorities. Another trader should not treat a similar published BTI as if it were a binding decision issued to that trader.

05 Can one BTI cover several different products?

The Commission instructs applicants to make a separate application for each type of product. The goods must be described in enough detail to allow customs to identify them and determine their classification.

06 Can a BTI be used for goods imported before the decision?

No. A BTI does not operate as a retroactive classification decision for earlier customs operations. It applies to goods for which the relevant customs formalities take place after the decision takes effect, subject to the applicable UCC rules.

07 What if the goods I import are slightly different from those in the BTI?

Do not assume the decision still applies. Under the Union Customs Code, the holder must be able to prove that the goods declared correspond in every respect to those described in the BTI decision.

08 What can I do if I disagree with the classification in my BTI?

The holder may appeal against the decision. Appeals are handled under national procedures, so the practical route and deadlines should be checked with the customs authority that issued the BTI.

OFFICIAL SOURCES

Start with the law. Then use the operational guidance.

Customs Explorer is an independent information resource and is not an EU institution. For legal and operational decisions, consult the applicable legislation and official customs sources.

BINDING TARIFF INFORMATION

When classification matters enough, certainty has a formal route.

Research the product. Understand the classification logic. Document the evidence. And where binding legal certainty is commercially important, consider whether BTI is the appropriate instrument.

CLASSIFICATION CERTAINTY BTI
01
UNDERSTAND Product characteristics
02
CLASSIFY CN + legal rules
03
DOCUMENT Evidence & reasoning
04
WHEN NEEDED Binding decision
BTI
FINAL PRINCIPLE A BTI does not replace classification analysis. It turns a classification decision into binding legal certainty.