CERTEX Data Flows.
How regulatory information moves between Union non-customs systems, EU CSW-CERTEX and national customs environments.
Explore the exchange architecture behind the EU Single Window Environment for Customs: from supporting-document references and regulatory information to customs verification and, where applicable, quantity management.
Establishing the European Union Single Window Environment for Customs.
Official legislationInside the exchange network
Union Non-Customs Systems
Systems holding regulatory information for specified Union non-customs formalities.
EU CSW-CERTEX
The Union-level component facilitating information exchanges between participating customs and non-customs systems.
National Customs Systems
National single window environments and customs systems supporting the processing of customs declarations.
Simplified architectural illustration. Actual information flows, system coverage, technical interfaces and operational availability depend on the applicable Union non-customs formality and implementation arrangements. The arrows illustrate exchanges, not a mandatory chronological processing sequence.
Held in the relevant Union non-customs system.
Supports interoperable information exchanges.
Information used under applicable customs rules.
What information actually moves?
EU CSW-CERTEX supports exchanges of information needed for specified Union non-customs formalities. The information involved depends on the applicable legislation, the connected systems and the purpose of the exchange.
Document References
Identifiers used to associate a customs declaration with a relevant supporting document or regulatory record held in a Union non-customs system.
Document Data & Status
Relevant information about the regulatory document, including its status and other data required for the applicable customs checks.
Data Transformation
Where required, EU CSW-CERTEX transforms information between the relevant customs and non-customs data formats to support interoperability.
Regulatory Responses
Information returned through the exchange process can support customs authorities in assessing whether the relevant non-customs requirements have been addressed.
From a reference to usable information.
The exchange process is not simply a document upload. It connects information already managed in different regulatory environments, using the mechanisms provided by the EU Single Window framework.
The supporting-document reference
A customs declaration may contain a reference to a regulatory document required for the goods concerned. The applicable data requirements determine how that reference must be supplied.
The relevant regulatory record
The participating Union non-customs system holds information associated with the document or formality. The information available for exchange is governed by the applicable legal and technical rules.
Interoperability and transformation
EU CSW-CERTEX facilitates the exchange of relevant information and, where necessary, transforms data to enable communication between the participating systems.
Information supporting regulatory checks
Customs authorities can use the information received when applying the relevant customs and non-customs requirements. The exchange itself does not constitute a decision to release the goods.
The data is formality-specific.
The categories below illustrate information that may be relevant to an exchange. They are not a universal data schema applicable to every CERTEX integration.
Identifiers linking customs information with regulatory records.
Information relevant to the status of the document or formality.
Relevant product or consignment particulars where required.
Authorised or used quantities where quantity management applies.
Relevant identifying information where provided for by the applicable rules.
Information returned to support the relevant customs assessment.
EU CSW-CERTEX supports the exchange and transformation of relevant data. It does not replace the regulatory decisions of competent authorities or the customs authority’s assessment of whether the conditions for release have been met.
One declaration. One regulatory reference.
Follow a simplified example of how a customs declaration can be associated with regulatory information held in TRACES through EU CSW-CERTEX. The actual workflow depends on the applicable formality and national implementation arrangements.
A consignment subject to official controls
A Common Health Entry Document (CHED) is used for a consignment subject to the relevant official control requirements. The declaration refers to the supporting document where required.
Supporting document recorded
The relevant CHED information is recorded and processed in TRACES under the applicable official-control legislation. Its regulatory status depends on the competent authority’s procedures and decisions.
Document reference declared
The declarant provides the required supporting-document reference in the customs declaration, using the applicable declaration data requirements.
Relevant information exchanged
The participating national customs environment exchanges the relevant information through EU CSW-CERTEX with the Union non-customs system. The exchange supports access to the regulatory information needed for the applicable checks.
Document information made available
Relevant information associated with the CHED is exchanged according to the applicable legal and technical arrangements. The data may support verification of the document reference, status and relevant consignment particulars.
Information assessed alongside other requirements
Customs authorities use the information received when assessing the declaration and the applicable customs and non-customs requirements. The exchange does not itself authorise release of the goods.
Four possible verification outcomes.
These are illustrative categories, not official CERTEX response codes or a universal list of technical message statuses.
Information consistent
The available regulatory information is compatible with the relevant declaration particulars and applicable verification conditions.
Reference not matched
The supplied document identifier does not correspond to the expected regulatory record, or the relevant information cannot be matched.
Regulatory discrepancy
A relevant document status, goods description or other required element is inconsistent with the intended operation.
Exchange unavailable
The expected information exchange cannot be completed because of a technical or operational issue. Any alternative handling depends on applicable procedures.
EU CSW-CERTEX facilitates information exchange between participating systems. It does not replace official controls, the powers of competent regulatory authorities or customs decisions under the applicable legislation.
One authorisation. Multiple customs declarations.
Where quantity management applies, EU CSW-CERTEX supports coordinated checks on quantities covered by regulatory documents. This helps prevent the same authorised quantity from being used beyond the limits permitted by the relevant formality.
How an authorised quantity is consumed
Hypothetical example only. The quantities below are not taken from a real licence, certificate or customs declaration.
Simplified arithmetic illustration. Actual availability depends on the document’s validity, regulatory status, quantity units, reservations, prior usage and the rules applicable to the particular Union non-customs formality.
Reserve first. Write off after release.
Quantity management is not merely a comparison between a declaration and a document. The system must account for what has been requested, what has been reserved and what customs ultimately releases.
Quantity reservation
Following the relevant customs declaration, EU CSW-CERTEX supports a request to reserve the declared quantity in the connected Union non-customs system.
The source system performs the applicable document and quantity checks and returns the result of the reservation process.
Write-off or cancellation
Following feedback from the customs system, the relevant Union non-customs system updates the quantity record according to the outcome of customs processing.
Quantities corresponding to goods released are written off. Where goods are not released, the corresponding reservation is cancelled in accordance with the applicable process.
What happens to a reserved quantity?
The follow-up exchange depends on the result communicated by the customs system.
Write-off
The relevant quantity is recorded as used against the supporting regulatory document, according to the applicable rules.
Reservation cancellation
The reservation is cancelled rather than treating the un-released goods as quantities definitively used.
Exception handling
Where automated verification cannot be completed successfully, the applicable control or exceptional handling procedure determines how the case proceeds.
Different Member States. One regulatory quantity record.
A supporting authorisation may be used in customs operations involving more than one Member State, where permitted by the applicable legislation. Union-level quantity management helps coordinate the relevant information across national customs environments.
This is particularly important where several declarations refer to the same regulatory authorisation: quantities already used must be taken into account when determining further availability.
Conceptual representation, not a technical network topology or live integration status.
Regulation (EU) 2022/2399, Articles 8(3)(b) and 10(1)(b), provides the legal framework. Commission Implementing Regulation (EU) 2024/2145 establishes specific information exchange rules, including automated quantity management and exceptional manual handling. These mechanisms do not apply identically to every supporting document.
When data exchange does not go as planned.
An unsuccessful exchange does not always mean that the underlying goods or regulatory document are non-compliant. The cause must be identified before determining the appropriate next step.
Four different problems. Four different responses.
Document reference not matched
The reference supplied in the customs declaration cannot be associated with the expected regulatory record.
Document status or data discrepancy
The relevant document status, quantity or consignment information may not satisfy the conditions applicable to the intended customs operation.
Electronic exchange unavailable
A technical or operational problem prevents the expected information exchange from being completed. This alone does not establish that the regulatory document is invalid.
Reservation or write-off not completed
A quantity-related operation may require additional handling when the expected automated reservation, write-off or cancellation cannot be completed.
Diagnose first. Apply the correct procedure.
Exception management begins by distinguishing an unavailable exchange from a genuine regulatory discrepancy. The appropriate response depends on the nature of the issue and the applicable legal framework.
Data or reference issue
Review the supplied declaration data and determine whether correction is legally possible and required.
Regulatory discrepancy
Assess the relevant sector-specific requirement and involve the competent authority where needed.
Technical interruption
Follow the applicable technical incident and alternative handling arrangements.
Automated exchange fails. Quantity records still matter.
Commission Implementing Regulation (EU) 2024/2145 provides rules concerning information exchanges and quantity management, including exceptional handling arrangements.
Establish the affected operation
Identify the relevant regulatory document, customs declaration and quantity-management operation.
Determine the customs outcome
Establish whether the relevant goods were released, not released or remain subject to an unresolved customs procedure.
Apply the competent procedure
Where the legal conditions for exceptional manual handling are met, the competent authorities follow the applicable arrangements.
Verify the quantity record
Confirm that the relevant reservation, write-off or cancellation is correctly reflected, avoiding an unsupported assumption that the operation succeeded.
These four steps are an editorial explanation of practical control objectives, not an official EU incident procedure or a prescribed technical sequence. Manual operations must follow the applicable legislation and competent authority arrangements.
A fallback procedure is not a compliance waiver.
Technical unavailability does not, by itself, remove the obligation to satisfy the applicable customs and non-customs requirements. Equally, a successful electronic exchange does not guarantee that goods may be released.
Regulatory requirements remain applicable.
Competent authorities retain their legal powers.
Customs release requires the applicable conditions to be met.
Regulation (EU) 2022/2399 establishes the EU Single Window Environment for Customs. Commission Implementing Regulation (EU) 2024/2145 lays down detailed rules for the relevant information exchanges and quantity management mechanisms.
CERTEX data flows. Questions answered.
Key technical and regulatory distinctions for customs professionals working with supporting documents, electronic verification and Union non-customs systems.
Does EU CSW-CERTEX store the exchanged certificates?
EU CSW-CERTEX is an information-exchange system, not a general certificate archive. Under Article 6(4) of Regulation (EU) 2022/2399, it does not store the information exchanged between national single window environments and Union non-customs systems, apart from technical logs indicating the supporting documents exchanged and the flow of those exchanges.
Does CERTEX change the content of regulatory data?
EU CSW-CERTEX can transform data formats and align terminology where necessary. Article 10(2) of Regulation (EU) 2022/2399 expressly provides for data-format transformation without changing the content of the data.
Can one regulatory document support several declarations?
Where the applicable formality permits multiple uses and quantity management applies, information exchanges can support reservation and consumption of quantities across customs operations. This does not mean that every document can be reused or that all formalities follow the same quantity rules.
Can customs override automated quantity verification?
Article 8 of Implementing Regulation (EU) 2024/2145 provides for exceptional manual quantity management. Customs authorities may, under their full responsibility and in exceptional circumstances, instruct EU CSW-CERTEX to bypass specified automated verifications and take the actions permitted by that provision.
Does a successful exchange authorise customs release?
No. The information exchanged supports the verification of relevant non-customs formalities. Release of goods remains a customs decision governed by the Union Customs Code and the applicable regulatory requirements.
Are all Union non-customs systems connected in the same way?
No. The Annex to Regulation (EU) 2022/2399 distinguishes Part A and Part B formalities. Connection obligations, implementation dates and the applicable functions must be assessed for each formality. Additional digital cooperation is also subject to specific legal conditions.
The rules behind the information exchange.
These official EUR-Lex texts establish the legal basis for EU CSW-CERTEX and its information-exchange mechanisms.
Regulation (EU) 2022/2399
Establishes the EU Single Window Environment for Customs, EU CSW-CERTEX, national single window environments and the framework for information exchange.
Implementing Regulation (EU) 2024/2145
Sets out technical and operational rules for exchanges through EU CSW-CERTEX, including document verification, quantity management and exceptional manual handling.
Regulation (EU) No 952/2013
Establishes the Union Customs Code, including rules on customs declarations, supporting documents and release of goods.
Legal references should be read together with the sector-specific legislation governing the relevant non-customs formality. The consolidated text linked above reflects the version dated 17 October 2024; check EUR-Lex for subsequent amendments.