Customs Explorer
⌕

Customs Explorer

Trust & Check self-release

EU CUSTOMS REFORM / ARTICLE 78

Trust & Check Self-Release.

Release goods on behalf of customs. Under customs supervision.

The new Union Customs Code introduces a mechanism allowing specifically authorised Trust & Check traders to release goods on behalf of customs authorities at designated business premises, provided that the required customs data and real-time arrival or dispatch information are made available.

CUSTOMS RELEASE FRAMEWORK
ART. 78(1)
ILLUSTRATIVE AUTHORISED OPERATION 01 / 03
STEP 01 / GOODS EVENT Arrival or dispatch

Goods arrive at, or are dispatched from, the relevant business premises.

01
STEP 02 / INFORMATION Data made available

Required procedure data and real-time information on arrival or dispatch reach the customs framework.

02
STEP 03 / AUTHORISED ACTION Release on behalf of customs

The authorised trader performs the release within the scope of the customs authorisation.

03
CONTINUING CUSTOMS OVERSIGHT Customs authorities retain control powers.

Controls, presentation requirements and suspension of the authorisation remain possible.

AUTHORISATION REQUIRED CUSTOMS SUPERVISION ACTIVE
THE SELF-RELEASE MODEL Three legal foundations.
01 Specific authorisation Customs authorities may authorise eligible Trust & Check traders.
02 Operational data Required procedure data and real-time goods-event information.
03 Customs supervision Authorities retain oversight, control and suspension powers.
01 / OPERATIONAL FRAMEWORK

Two movements. One controlled release mechanism.

Article 78(1) identifies two operational situations in which a specifically authorised Trust & Check trader may release goods on behalf of customs: receipt at a qualifying business premises or dispatch from a qualifying business premises.

LEGAL BASIS 78(1) Regulation (EU) 2026/2108 Official legal text
SCENARIO A / INBOUND RECEIPT OF GOODS
01

Release upon receipt.

The goods are received at the place of business of the importer, owner or consignee.

TRIGGERING EVENT Receipt at the qualifying premises
SCENARIO B / OUTBOUND DISPATCH OF GOODS
02

Release upon dispatch.

The goods are dispatched from the place of business of the exporter, owner or consignor.

TRIGGERING EVENT Dispatch from the qualifying premises
AUTHORISATION CONDITIONS

Four elements must come together.

The release mechanism combines trader status, a specific customs authorisation, qualifying goods movements and the required information.

01
§

Trust & Check status

The operator must hold the relevant Trust & Check status under Article 31.

UNDERLYING STATUS
02
▣

Specific authorisation

Customs authorities must authorise release on their behalf under Article 78(1).

ADDITIONAL AUTHORISATION
03
⌖

Qualifying premises

Receipt or dispatch must correspond to the business locations identified by the provision.

OPERATIONAL LOCATION
04
▤

Required information

Procedure-specific data and real-time arrival or dispatch information must be available to customs.

INFORMATION CONDITION
THE INFORMATION CONDITION

Two information streams. Both are essential.

Article 78(1) does not merely require notification that a truck has arrived or departed. It requires both the data necessary for the relevant customs procedure and real-time information about the physical goods event.

STREAM A PROCEDURE INFORMATION
▤

Data for the customs procedure

The information necessary to place the goods under the relevant procedure must be provided or made available to customs.

ILLUSTRATIVE DATA DOMAINS Goods identification Customs procedure Relevant commercial information
STREAM B PHYSICAL EVENT
⌖

Real-time movement information

Customs must receive or have access to real-time information concerning the arrival or dispatch of the goods at the relevant premises.

ILLUSTRATIVE EVENT RECORDS Arrival or dispatch event Relevant goods reference Operational event record
i

Technical distinction: the examples above illustrate possible information categories, not a legally prescribed data schema. Article 78(7) empowers the Commission to establish additional procedural rules through delegated acts. The precise implementation must be checked against the applicable acts and technical specifications.

IMPORTANT LEGAL DISTINCTIONS

What the authorisation does — and does not — mean.

✓ WHAT ARTICLE 78(1) PROVIDES
01

A possible authorisation for Trust & Check traders to release goods on behalf of customs.

02

A release mechanism linked to receipt or dispatch at qualifying business premises.

03

A requirement to provide or make available procedure data and real-time movement information.

! WHAT IT DOES NOT AUTOMATICALLY GRANT
01

An unconditional right to self-release merely because the trader holds Trust & Check status.

02

A general exemption from customs controls, product-compliance rules or other applicable requirements.

03

An automatic authorisation to perform customs controls on goods; Article 78(3) addresses that separately.

02 / CUSTOMS SUPERVISION & CONTROL

The trader performs the release. Customs retains the authority.

Trust & Check self-release changes who may perform an authorised release operation. It does not transfer the full range of customs powers to a private operator. Customs supervision, intervention and control remain integral to the legal framework.

REGULATORY DISTINCTION Release ≠ Control

Article 78 distinguishes authorisation to release goods from authorisation to carry out certain customs controls.

SUPERVISION MODEL CONCEPTUAL OPERATIONAL DIAGRAM
COMPETENT CUSTOMS AUTHORITY

Legal supervision and intervention

Customs authorities retain the power to supervise goods, select operations for control and exercise the powers provided by customs legislation.

AUTHORITY
01
AUTHORISATION UNDER ARTICLE 78(1)

Release on behalf of customs

The authorised trader may perform release operations within the scope and conditions established by customs.

SPECIFIC AUTHORISATION REQUIRED
02
SEPARATE CONTROL AUTHORISATION

Performance of certain controls

Where separately authorised under Article 78(3), a Trust & Check trader may perform certain customs controls under the applicable conditions.

NOT AUTOMATICALLY INCLUDED
i

Important: this diagram explains the allocation of functions. It does not imply that every self-release authorisation includes permission to conduct customs controls, or that customs intervention is limited to the scenarios illustrated below.

PRACTICAL CONTROL SCENARIOS

When customs intervention matters.

The following examples illustrate situations that may require a trader to follow instructions, preserve the goods’ status or seek clarification before proceeding.

01 / CONTROL SELECTION
⌕

Goods selected for examination

Customs may require an examination or other control before goods can be released. A trader should not treat self-release authorisation as permission to disregard an applicable control instruction.

OPERATIONAL RESPONSE Follow the customs instruction
02 / DATA DISCREPANCY
≠

Records do not match the goods

A mismatch involving quantities, identification, customs status or procedure data may require investigation and correction before the relevant release operation proceeds.

OPERATIONAL RESPONSE Investigate and resolve the discrepancy
03 / REGULATORY RESTRICTION
§

Other legislation applies

Product safety, licensing, prohibitions or restrictions may affect whether goods can be released. Trust & Check status does not remove applicable non-customs requirements.

OPERATIONAL RESPONSE Verify the applicable conditions
04 / SYSTEM AVAILABILITY
⌁

Required information is unavailable

If essential information cannot be provided or made available, the trader must not assume that the data-access condition has been fulfilled.

OPERATIONAL RESPONSE Apply the authorised contingency process
ILLUSTRATIVE DECISION LOGIC

Before a release operation proceeds.

A simplified internal decision framework can help prevent premature release. This is a compliance illustration, not an official EU Customs Data Hub workflow or a substitute for the authorisation terms.

INTERNAL RELEASE READINESS CONTROLLED WORKFLOW
01
AUTHORISATION Is this operation within the authorised scope?
CHECK
02
DATA & GOODS Are the required data and goods-event information available?
CHECK
03
CUSTOMS INSTRUCTIONS Is there any applicable hold, control or restriction?
CHECK
IF A CONDITION IS NOT MET Do not proceed automatically

Follow the applicable customs instructions and the procedures governing the authorisation.

IF ALL APPLICABLE CONDITIONS ARE MET Proceed within the authorised scope

Perform the permitted release operation and retain the required operational records.

ACCOUNTABILITY IN PRACTICE

Delegated action does not eliminate responsibility.

TRADER

Operate within the authorisation

Maintain reliable information, follow applicable conditions and avoid performing release operations outside the authorised scope.

CUSTOMS AUTHORITY

Retain supervision and control

Exercise the powers established by customs legislation, including controls and measures affecting the authorisation.

INTERNAL GOVERNANCE

Maintain an auditable process

As a recommended control practice, define responsibilities, escalation rules and records of relevant operational decisions.

LEGAL AND TECHNICAL NOTE

Regulation (EU) 2026/2108, Article 78, read with the applicable provisions on customs supervision and controls. Operational scenarios and decision logic are illustrative and must be adapted to the conditions of the individual authorisation.

03 / TRADER-PERFORMED CONTROLS

Authorised to check. Not authorised to decide everything.

Article 78(3) allows customs authorities to authorise Trust & Check traders to perform certain controls on goods under customs supervision. The permission is specific: it does not turn the trader into a customs authority or confer unlimited inspection powers.

LEGAL FRAMEWORK 78(3–7) Regulation (EU) 2026/2108 Read official text ↗
TWO DISTINCT LEGAL PERMISSIONS ARTICLE 78
01 PARAGRAPH 1

Release authorisation

The trader may release qualifying goods on behalf of customs, subject to the authorisation and the required procedure and goods-event information.

FUNCTION Release of goods
02 PARAGRAPH 3

Control authorisation

Customs may separately permit the trader to carry out certain controls on goods under customs supervision, within the authorised conditions.

FUNCTION Specified customs controls
i

Legal distinction: holding Trust & Check status does not, by itself, authorise every release operation or every customs control. The competent authority must grant the relevant permission.

ARTICLE 78(3)

When other legislation is involved, other authorities matter.

Controls relating to legislation applied by customs may concern matters beyond customs duties. Before granting an authorisation for such controls, customs must consult the other competent authorities and may agree a control plan with them.

INTER-AUTHORITY COORDINATION LEGAL PROCESS / CONCEPTUAL VIEW
AUTHORITY 01

Customs authority

Evaluates whether to grant permission for specified controls.

AUTHORITY 02

Other competent authority

Consulted where controls concern other legislation applied by customs.

SUBJECT TO THE AUTHORISATION GRANTED Trust & Check trader

May perform only the controls covered by its permission.

ART. 78(3)
MANDATORY LEGAL STEP Consultation

Customs must consult the relevant other competent authorities before authorising controls under the other legislation they apply.

POSSIBLE COORDINATION TOOL Control plan

The authorities may agree a control plan. Article 78(3) does not make such a plan universally mandatory.

ARTICLE 78(4)

Suspected non-compliance? The decision returns to customs.

Where a trader authorised to perform controls has reason to believe that goods do not comply with relevant other legislation applied by customs, Article 78(4) establishes a specific notification obligation and reserves the subsequent decision to the customs authorities.

01
TRADER IDENTIFIES A CONCERN

Reason to believe goods are non-compliant

A concern arises concerning relevant other legislation applied by customs.

TRIGGER
02
LEGAL OBLIGATION

Immediately notify customs

The trader must inform the customs authorities without delay under Article 78(4).

MANDATORY
03
DECISION BY CUSTOMS

Release or control of the goods

Upon notification, the customs authorities decide whether to release or control the goods concerned.

CUSTOMS
!
Practical compliance safeguard

Pending customs instructions, the trader should prevent an unauthorised release, preserve the relevant evidence and document the notification. These are recommended operational safeguards; they are not a verbatim list of obligations established by Article 78(4).

ARTICLES 78(5) AND 78(6)

Customs can intervene. And authorisations can be suspended.

ARTICLE 78(5) ⌖

Presentation of goods

Where necessary, customs may require the trader to present goods for a control at a customs office or at the place where the goods were intended to be released.

LEGAL POWER Request presentation for control
ARTICLE 78(6) Ⅱ

Suspension of authorisations

Where a new serious financial risk or another specific situation is identified in relation to release on behalf of customs, the authorities may suspend authorisations under paragraphs 1 and 3, in accordance with Article 12(2).

LEGAL POWER Suspension under Article 12(2)
IMPLEMENTATION READINESS LEGAL REQUIREMENTS VS GOOD PRACTICE

Build a controlled process, not an unchecked shortcut.

The regulation establishes the legal framework. The exact controls, evidence, roles and technical procedures must be determined from the individual authorisation and applicable supplementary rules.

01 Define authorised scope

Maintain a clear internal description of which controls may be performed.

RECOMMENDED IMPLEMENTATION
02 Assign trained personnel

Identify responsible staff and provide training appropriate to the permitted controls.

RECOMMENDED IMPLEMENTATION
03 Record findings and evidence

Keep traceable records of inspections, discrepancies and communications.

RECOMMENDED IMPLEMENTATION
04 Escalate non-compliance

Establish a reliable process for the immediate notification required by Article 78(4), where applicable.

LEGAL DUTY + INTERNAL PROCESS
LEGAL REFERENCES

Regulation (EU) 2026/2108, Article 78(3)–(7), read with Articles 12(2) and 63. Article 78(7) empowers the Commission to establish further procedures and conditions through delegated acts. Examples of internal controls on this page are recommendations, not prescribed EU technical specifications.

04 / OPERATIONAL RISK & RESILIENCE

Faster release. Greater operational discipline.

Self-release can reduce dependence on individual customs release actions, but it also makes the trader’s internal processes critical. Incorrect information, unresolved restrictions or an operation outside the authorised scope can turn an efficiency benefit into a compliance problem.

CORE PRINCIPLE Speed must never replace control.

A reliable release process must recognise exceptions before goods move beyond the permitted customs procedure.

OPERATIONAL RISK RADAR FIVE CRITICAL CONTROL AREAS
SELF-RELEASE CONTROL Authorised operation

An internal control model should detect exceptions before an authorised release operation is performed.

01
Incorrect customs data

Classification, origin, value, quantity or procedure information may be inaccurate.

DATA
02
Goods-event mismatch

Physical receipt or dispatch does not correspond to the recorded goods movement.

MOVEMENT
03
Unresolved regulatory requirements

A licence, restriction or product-compliance condition has not been verified.

COMPLIANCE
04
Information-system failure

Required information is missing, delayed or temporarily unavailable to customs.

SYSTEMS
05
Authorisation-scope error

Personnel attempt a release not covered by the trader’s specific authorisation.

AUTHORITY
DESIGN OBJECTIVE Detect → Investigate → Escalate → Resolve → Record Illustrative internal risk-management cycle
ILLUSTRATIVE CASE STUDY

One shipment. Two possible outcomes.

Consider a Trust & Check importer that has obtained a specific authorisation to release qualifying goods upon receipt at its business premises. The example assumes that all other applicable conditions for the customs procedure are satisfied unless an exception is expressly identified.

SIMULATED IMPORT OPERATION

Industrial components arriving at the importer’s warehouse

CASE FILE TC / 001
TRADER Authorised Trust & Check importer
GOODS Industrial components
LOCATION Qualifying business premises
OPERATION Receipt and potential release
01
PHYSICAL EVENT
The goods arrive

The shipment reaches the authorised operational location. The trader records the arrival and identifies the goods received.

02
INFORMATION
Required data are made available

The information necessary for the relevant customs procedure and the required goods-event information are provided or made available to customs in accordance with the applicable rules.

03
INTERNAL VALIDATION
The trader checks for exceptions

As a recommended safeguard, the operator checks data consistency, authorisation scope and any applicable customs instruction or regulatory restriction.

THE OPERATION REACHES A DECISION POINT
PATH A CONDITIONS SATISFIED
✓
Authorised release proceeds

No applicable customs hold or unresolved restriction prevents the operation. The trader performs the release within the scope of its authorisation and records the relevant transaction.

PATH B EXCEPTION IDENTIFIED
!
Release does not proceed automatically

A discrepancy or restriction requires resolution. If the trader has reason to believe that the goods breach relevant other legislation applied by customs, the notification rule in Article 78(4) applies to an operator authorised under Article 78(3).

i

Illustrative workflow: this case does not establish an official release sequence, a mandatory IT validation process or an automatic right to release goods immediately upon arrival.

AUTHORISATION CONTINUITY

An authorisation is valuable. It is not irrevocable.

Article 78(6) provides for suspension of the authorisations referred to in paragraphs 1 and 3 in the circumstances specified by that provision, in accordance with Article 12(2). The operational consequence can be significant for a trader that relies on self-release.

LEGAL FRAMEWORK 78(6)

Possible suspension

The legal framework permits customs authorities to suspend relevant authorisations when the specified circumstances arise. The applicable legal conditions and procedure must be assessed under Article 78(6) and Article 12(2).

RELATED RULE Article 12(2)
RECOMMENDED BUSINESS CONTINUITY MEASURES
01
Monitor authorisation conditions

Periodically review the approved scope, relevant changes and operational compliance.

02
Prepare an alternative clearance route

Document how customs operations would continue if self-release were temporarily unavailable.

03
Control operational permissions

Prevent staff or systems from performing self-release when the authorisation is not effective for the relevant operation.

04
Maintain incident and decision records

Preserve evidence needed to understand exceptions and demonstrate how they were handled.

BUSINESS IMPACT

Measure the process, not just the release time.

Faster operations are useful only when supported by accurate data and sustainable controls. These indicators are suggested management metrics, not regulatory performance thresholds.

01 Data exception rate

Share of operations requiring correction or investigation.

02 Release interruption rate

Frequency of holds, system failures or unresolved restrictions.

03 Exception resolution time

Time needed to investigate and resolve an operational issue.

04 Record completeness

Availability of evidence supporting the operation and its outcome.

LEGAL REFERENCE & SCOPE

Regulation (EU) 2026/2108, Article 78, particularly paragraphs 1, 3, 4 and 6, read with Article 12(2). Operational scenarios, risk indicators and continuity measures are illustrative recommendations, not statutory checklists or official technical specifications.

05 / QUESTIONS & LEGAL FRAMEWORK

Self-release, explained. The questions that matter.

The Trust & Check framework introduces a different allocation of certain release functions. These answers clarify what the authorisation may permit, what remains under customs supervision and which assumptions businesses should avoid.

FREQUENTLY ASKED QUESTIONS

Eight practical answers.

FAQ / 08
01 Can every Trust & Check trader release goods independently?

No. Trust & Check status and authorisation to release goods on behalf of customs are distinct matters. Article 78 provides for a specific authorisation, subject to its applicable conditions and scope.

KEY REFERENCE: ARTICLE 78(1)
02 Does self-release eliminate customs declarations and data obligations?

No. The framework changes how certain authorised operations may be performed; it does not remove the obligation to provide or make available the information required by the applicable customs rules. The exact information and procedural requirements depend on the legal framework and the authorisation concerned.

Explore data access requirements ↗
03 Can the trader also carry out customs controls?

Certain controls may be performed by a Trust & Check trader where the customs authorities grant the separate authorisation contemplated by Article 78(3). This permission is not automatically included in a self-release authorisation.

KEY REFERENCE: ARTICLE 78(3)
04 Can customs still inspect goods intended for self-release?

Yes. Self-release does not eliminate customs supervision or control powers. Article 78(5) specifically addresses the presentation of goods for customs control where necessary.

KEY REFERENCE: ARTICLE 78(5)
05 What happens if goods appear to breach other legislation?

Article 78(4) establishes an immediate notification requirement for a trader authorised to perform controls where it has reason to believe that goods do not comply with relevant other legislation applied by customs. Customs then decides whether to release or control the goods.

KEY REFERENCE: ARTICLE 78(4)
06 Can a self-release authorisation be suspended?

Yes. Article 78(6) provides for suspension of the authorisations referred to in paragraphs 1 and 3 in the circumstances specified there, in accordance with Article 12(2). Businesses should therefore prepare continuity arrangements for operations that cannot proceed through self-release.

KEY REFERENCES: ARTICLES 78(6) AND 12(2)
07 Does the authorisation remove product restrictions or licensing requirements?

No. Applicable prohibitions, restrictions, licensing requirements and other legislation applied by customs remain relevant. Self-release cannot be treated as a general exemption from these rules.

PRINCIPLE: COMPLIANCE WITH APPLICABLE LEGISLATION
08 Can businesses implement the complete process immediately?

A legal framework does not necessarily mean that every operational procedure or authorisation is already available. Businesses must verify the applicable dates, implementing arrangements, competent-authority procedures and technical requirements before relying on self-release.

See the implementation timeline ↗
CUSTOMS EXPLORER / EU CUSTOMS REFORM Self-release is a controlled authorisation, not the disappearance of customs.
Back to Trust & Check overview